dailyspect 
Nowadays, there are so many products of 10 micron carbon block water filter in the market and you are wondering to choose a best one. You have searched for 10 micron carbon block water filter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 10 micron carbon block water filter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
34,399 Reviews Scanned
10 Pack Activated Carbon Block ACB Water Filter Replacement – 5 Micron, 10 inch Filter – Under Sink and Reverse Osmosis System
- Protect your Water – Removes Chlorine, Pesticides, Total Organic Carbon (TOC), Bad Taste, Odor, Fine Sediments, and Industrial Solvents
- High Standard Filtration – Verified by independent laboratory testing to meet NSF / ANSI 58 Standard
- The Best Filtration – Efficiently packed carbon granules create full coverage filtration which means your filter lasts longer
- Universal Standard Size – 5 Micron Activated Carbon Block (ACB) Filter, 9. 75” x 2. 5” size fits all 10” filters
- Made to Last – Airtight vacuum sealed packaging prevents spoiling of your filter
Protect your home, health, and appliances by filtering your water. The Express Water Activated Carbon Block Filter 10 pack removes major contaminants from your water and provides clean water for home uses. The ACB removes major water contaminants like Chlorine, Total Organic Carbon (TOC), Pharmaceuticals, Turbidity, Volatile Organic Chemicals (VOC), Herbicides, Industrial Solvents, Insecticides, Pesticides, and Chemicals causing bad tastes, odors, and more. The ACB filter is good for up to 6 months. This is based on average water quality. Your filter life may be different depending on your water quality, temperature, and incoming pressure. This durable home water filter is able to deliver up to 1 gallon of water per minute. The filter works with 45-80 psi and water temperatures between 40-100℉. The filter is vacuum sealed and complete with a polypropylene shell, a thermal bonded cap, and an industrial sealed silicon ring to make sure it’s durable and reliable. Filter your water with high quality coconut carbon for maximum chemical absorption. Choose the filter that lasts longer to give you the best value in filtration. The Express Water Activated Carbon Block Filter FLTCAR05010C is the best in carbon filtration.
Similar items with 4 stars and above
Hydronix CB-25-2010 NSF Carbon Block Filter 2.5" OD X 20" Length, 10 Micron
Reduce:. Chlorine Taste and Odor. High Chlorine Removal Capacity. Certain VOCs (Volatile Organic Compounds). Specs:. Product Dimension: 20″ H x 2.75″ W. Chlorine Capacity: 9000 at 2.75 gpm. Micron Rating: 10 ?m. Initial PSI at Flow Rate (GPM): 2.0 psid at 2.0 gpm. Fits most standard 20″ water filter housings. Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2 °C). Maximum Operating Pressure: 250 PSI. Maximum Differential Pressure: 100 PSID. Collapse Pressure: 200 PSID. Netting: Polypropylene. End Caps: Polypropylene. Gaskets: Neoprene. Outer Wrap: Polypropylene.
Similar items with 4 stars and above
Tier1 Replacement for Omnifilter, GE, Pentek CBC-10 CB3 FXUVC FXULC 0.5 Micron 10 x 2.5 Radial Flow Carbon Water Filter
- QUICK & EASY INSTALLATION: Fits most housings that accept standard 10-inch x 2.5-inch water filter cartridges.
- 6 MONTH FILTER LIFE: By replacing your water filter every 6 months, depending on your water quality, you keep your water tasting great with the Tier1 CB3 filter.
- HIGH QUALITY FILTRATION: This Culligan D30 comparable Tier1 filter reduces chlorine and odor, cysts, dirt, sediment, sand, silt, rust and corrosion, and other particles.
- REPLACEMENT PART FOR MANY PART NUMBERS & MODELS: This filter is universal to many 0.5 Micron 10 x 2.5 carbon water filters. Replace your old Pentek CBC-10 water filter or Omnifilter CB3 Filter with a Tier1 FXUVC filter.
- 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
Big Blue CTO Carbon Block & Sediment 10"x4.5" Replacement Filter Cartridges Set
- FITS STANDARD 10 INCH. BIG BLUE FILTER HOUSINGS
- 4 OF 5 MICRON 10” BIG BLUE CARBON BLOCK CTO WATER FILTER CARTRIDGE BY AQUABOON
- 4 OF 10” BIG BLUE SEDIMENT PP WATER FILTER CARTRIDGE – 5 Micron Gradient Density, Multi-Layered, Melt Blown Sediment Filter Cartridge
- Lifetime: Replace two or three times a year, depending on the water quality
- Filters life: 10,000 gallons
Pentek EP-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 5 Microns
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Nominal filtration rating of 5 microns
- Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 3.4 psi at a flow rate of 1 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
This Pentek EP-10 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 6,000 gallons at a flow rate of 1 gallon per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 3.4 pounds per square inch (psi) at a flow rate of 1 gallon per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.
Specifications
| Nominal filtration rating | 5 microns |
| Initial pressure drop at 1 gpm | 3.4 psi |
| Chlorine reduction capacity | 6,000 gallons at 1 gpm |
| Temperature range | 40 to 180 degrees F (4.4 to 82.2 degrees C) |
| Maximum dimensions (H x W) | 9-3/4 x 2-7/8 inches (248 x 73 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
4-Pack Compatible for Watts MAXETW-975 10-Inch 5-Micron for Multi-Cartridge Whole House Water Filter with Solid Block Activated Carbon
- 4-Pack Watts MAXETW-975 compatible 10-Inch 5-Micron for Multi-Cartridge Whole House Water Filter with Solid Block Activated Carbon
- Coconut shell carbon, universal 10 inch activated carbon block filter. Improves taste and clarity while retaining beneficial nutrients by reducing chlorine, fine sediment, odor, silt, rust.
- Removes undesirable and possibly harmful waterborne contaminants, particles, chemicals and microorganism.
Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron
- Reduces chlorine and chloramines in residential and commercial drinking water
- Nominal filtration rating of 1 micron
- Bonded PAC media with a polyolefin core and shell
- Initial pressure drop of 6 psi at a flow rate of 1 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
This Pentek ChlorPlus 10 carbon block filter cartridge reduces chlorine and chloramine in residential and commercial drinking water. It has nominal filtration rating of 1 micron at an efficiency of 85%. The cartridge is made of bonded powdered activated carbon (PAC) media with a polyolefin core and shell and polyethylene outer netting. A Santoprene gasket provides a watertight seal. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 50,000 gallons at a flow rate of 1 gallon per minute (gpm), and reduce 3 ppm chloramines by at least 75% in up to 1,000 gallons at a flow rate of 1 gpm. The filter has an initial pressure drop of 6 pounds per square inch (psi) at a recommended flow rate of 1 gpm, and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This carbon block filter cartridge is used for treatment of residential and commercial drinking water.
Specifications
| Nominal filtration rating | 1 micron |
| Initial pressure drop at 1 gpm | 6 psi |
| Chlorine reduction capacity | 50,000 gallons at 1 gpm |
| Chloramine reduction capacity | 1,000 gallons at 1 gpm |
| Operating temperature range | 40 to 125 degrees F (4.4 to 51.7 degrees C) |
| Maximum dimensions (H x W) | 9-3/4 x 2-7/8 inches (248 x 73 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%. Chloramine reduction capacity is the minimum total amount of water for which chloramines at a concentration of 3 ppm are reduced by 75%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Big Blue CTO Carbon Block Water Filters 4.5" x 10" Whole House Cartridges (4 Pack)
- Keeps water fresh by reducing and removing iron, manganese, chlorine, hydrogen sulfide, herbicides, pesticides, and other industrial chemicals
- Universal Replacement for all 10″ Big Blue Water Filter Housing
- Product Lifetime – 10,000 gallons – replace two or three times a year – depending on your water quality
- This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations
- Dimensions: 10 inches x 4.5 inches (24.4 cm x 11.43 cm)
Aquaboon 5 Micron 20" Big Blue Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration | Compatible with AP810-2, SDC-45-2005, FPMB-BB5-20, P5-20BB, FP25B, 155358-43, 2 Pack
- ???? [Dimensions] 20 inches x 4.5 inches – 2-PACK Of 5 Micron Sediment Water Filter. Universal replacement – fits most 20 inch Big Blue Water Filter housings.
- ???? [Quality Filtration] Made of thermally bonded 100% Pure POLYPROPYLENE Microfibers. Whole house sediment filtration. Contains no binders, agents, solvents, antistatic materials or wetting agents. 5 zones of filtration to ensure quality and remove more contaminants, large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles.
- ???? [Lifetime] 4 – 6 months / 20000 – 30000 gallons (depending on the water quality). Replace for great taste of your water.
- ???? [Compatible Replacement Filters] Aqua Sun International SWS-BB, AquaPure AP810-2, AXEON Membranes 200640, ClearChoice 84644, Everpure EV910837, Filter Specialist CMMF0520-45W1, FreshWaterSystems MBGC-45200-05, Heritage Parts TMP5618907, Hydronix SDC-45-2005, SDG-45-2005, iSpring FP25B, Liquatec SDF-45-2005, Neo-Pure MBGC-45200-05, Pentair DEV910837, EV910837, P5-20BB, Pentek 155358-43, P5-20BB, Pura 33003117, Sterilight CMB-520-HF, Valuetrex VX05-20BB, Watts FPMB-BB5-20, etc.
- ???? [COMPATIBLE HOUSINGS] 3M 70020143163, AquaPure AP802, AP802-1.5, Cuno 5557610, CFS02T. Systems from 3M, DuPont, APEC, Whirlpool, Olympia, US Aqua, Pentek, Aquasana, Culligan, Costway, GE, Smart Aqua Life, Geekpure, The Perfect Water, Glacier Bay, Aqua-Pure, Global Water, etc.
2 PACK OF 5 MICRON 20″ BIG BLUE SEDIMENT POLYPROPYLENE WATER FILTER REPLACEMENT CARTRIDGE BY AQUABOON
Sediment filter is made of fine melted polypropylene, which is blown and spun in a cylinder-like form. The main function of sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. These Whole House filters have graded density layers, meaning the outer layers are more porous, catching larger particles, while the inner layers are a finer micron. Catching smaller particles. Each cartridge is individually shrink-wrapped.
Features:
Micron rating: 5 Micron
Dimensions: 20” x 4.5”
Lifetime: Replace two or three times a year, depending on the water quality
Individually shrink wrapped
Flow rate: 5 GPM
Filter life: 20000 – 30000 gallons
Operating Temperature: 39°F~125°F (4°C~52°C)
Max. Operating Pressure: 60 psi
Removes dust, particles, and rust
Good for water filters and aquariums
Compatible Replacement Filters:
Aqua Sun International SWS-BB, AquaPure AP810-2, AXEON Membranes 200640, ClearChoice 84644, Everpure DEV910837, EV910837, Filter Specialist CMMF0520-45W1, Flexeon 200640, FreshWaterSystems MBGC-45200-05, Heritage Parts TMP5618907, Hydronix SDC-45-2005, SDG-45-2005, Ice House America IHA-H00995, Ideal H2O 738358, iSpring FP25B, KaTom 584-5618907, Liquatec SDF-45-2005, Pentek 155358-43, P5-20BB, Pura 33003117, 33003117-1 etc.
Compatible housings:
3M 70020143163, AquaPure AP802, AP802-1.5, Cuno 5557610, CFS02T. Systems from 3M, DuPont, APEC, Whirlpool, Olympia, US Aqua, Pentek, Aquasana, Culligan, Costway, GE, Smart Aqua Life, Geekpure, The Perfect Water, Glacier Bay, Aqua-Pure, Global Water, etc. Universal replacement – fits most 20 inch Big Blue Water Filter housings.
Hydronix HX-CB-25-2010/3 Universal NSF Coconut Activated Carbon Block Water Filter, 2.5" x 20" – 10 micron – 3 Pack, White
3 pack – Hydronix cb-25-2010 carbon block filters are nsf/ansi standard 42 certified for material and structural safety. Cb-25-2010 filters have a particle retention size of 10 microns, and are suitable for drinking water filtration applications. Hydronix cb-25-2010 carbon block filters are manufactured with nsf certified, safe, coconut shell activated carbon to reduce unpleasant taste, odor, chlorine and other contaminants from drinking water. The filter has a 2.5″ outside diameter (OD) and an TOTAL length of 20″. the operating temperature range is 40 to 180 degrees F, and has a maximum pressure rating of 250 pounds per square inch (psi). this carbon block filter is suitable for use in water dispensing applications where higher chlorine levels are present. Hydronix coconut shell carbon blocks have great cost to performance value, have high chlorine reduction capabilities, great dirt holding performance, and offer exceptional value and performance over other similar filters in the market.
Conclusion
By our suggestions above, we hope that you can found 10 micron carbon block water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!
