Which Is The Best 1060 Water Cooling

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

100% new, fine workmanship, simple sense is very strong!
Bykski N-GX1060-X for Pcasl All Series Reference Version GTX 1060 design,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Water cooling block is designed using 0.2 MM micro channel injection, all designed for performance! Core (GPU), direct cooling graphics memory (RAM), as well as the graphics card power supply (VRM) these hot key parts of the graphics card, to ensure that the players and the stability of the overclocking, maintain a good temperature.
Graphics using large water flow design, even if the hm weaker pump can meet the demand.
Water cooling block at the bottom of the use of high purity copper manufacturing, and electroplating processing to prevent oxidation, more make water head of delicate and beautiful. Cover the use of high-quality POM material or imported acrylic materials, ensure the service life of water head and durability. Sealing material using a high standard of sealing ring resistance to ageing of fatigue, ensure the sealing water cooling block.
Video card water cooling block is free to change direction, convenient players form a SLI&CF firefight system, can be in series or in parallel.
parts list:
fast twist (3/8ID*1/2OD) X 2
plugs X 2
Thermal paste X 1
mounting screws X 1
RGB LED X 1
Compatible graphics card type:NVIDIA Quadro P2000
Compatible graphics card type: All Series Reference Version GTX 1060
Compatible graphics card type:ZOTAC GTX 1060 AMPED
Compatible graphics card type:NVIDIA Quadro P2000
NOTE:Before buying, please contact the seller, the GPU WATER COOLING BLOCK compatible models, factory often modify graphics PCB, so in order to avoid after the purchase is not compatible .

Specifications:

Fan specifications:

Fan speed: 700-1500RPM

Air volume: 62CFM

Noise: 18.0-26.4dB (A)

Connector: 4Pin (2510)

Start-up voltage: DC 7V

Rated voltage: DC 12V

Rated current: 0.18A

Rated power: 2.16W

Size: 120X120X25mm/4.72X4.72X0.98″

Pump specifications:

Pump speed: 2000 RPM

Pump head: 1.2m H2O

Cold liquid flow rate: 96L/H

Noise: 25.0dB (A)

Connector: SATA

Rated voltage: DC 12V

Rated current: 0.25A

Rated power: 3W

Cold Head Size: 65×32.5mm/2.56×1.28″

Cold Plate size: 154x120x27mm/6.06×4.72×1.06″

Pipe length: 315mm/12.4″

Notes:

1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

2. Please allow slight measuring deviation due to manual measurement.

Package included:

1 X GPU Cooling Fan

1 X Installation Kit

1 X User Manual

EK-FC GeForce GTX FE is a high-performance full-cover water block for multiple NVIDIA GeForc GTX and Titan X (Pascal) based graphics cards. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeFroce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LEDs. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The EK-FC GeForce GTX FE water block is backward compatible with all EK-FC1080 GTX Backplates, EK-FC1080 GTX Ti Backplates, and EK-FC Titan X Pascal Backplates. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC GeForce GTX FE water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. The EK-FC GeForce GTX FE water block is compatible with all reference design GeForce GTX 1060, GeForce GTX 1070, GeForce GTX 1080, GeForce GTX 1080 Ti, GeForce Titan X Pascal and GeForce Titan Xp based graphics cards.

Model: 3831109831977

Note: Please be sure to contact us before purchasing. Because there are several versions of the sapphire graphics card, our domestic sapphire graphics card version is completely different from the foreign sapphire graphics card version. If you do not contact us before purchase, it will easily lead to GPU BLOCK not compatible with your graphics card, thank you.
100% new, fine workmanship, simple sense is very strong!
Bykski A-SP58PLAT-X for Pcasl Sapphire RX580 Graphics design,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Water cooling block is designed using 0.2 MM micro channel injection, all designed for performance! Core (GPU), direct cooling graphics memory (RAM), as well as the graphics card power supply (VRM) these hot key parts of the graphics card, to ensure that the players and the stability of the overclocking, maintain a good temperature.
Graphics using large water flow design, even if the hm weaker pump can meet the demand.
Water cooling block at the bottom of the use of high purity copper manufacturing, and electroplating processing to prevent oxidation, more make water head of delicate and beautiful. Cover the use of high-quality POM material or imported acrylic materials, ensure the service life of water head and durability. Sealing material using a high standard of sealing ring resistance to ageing of fatigue, ensure the sealing water cooling block.
Video card water cooling block is free to change direction, convenient players form a SLI&CF firefight system, can be in series or in parallel.
parts list:
fast twist X 2
plugs X 2
thermal paste X 1
mounting screws X 1
With RGB LED X 1
Compatible graphics card type: Sapphire RX580 8G D5
Compatible graphics card type: Sapphire RX580 8G D5 OC
Compatible graphics card type: Sapphire RX580 4G D5 OC

Thermaltake Pacific v-gtx 10 series founders Edition transparent water block is a full cover water block including an aluminum alloy back plate. Compatible with NVIDIA GeForce GTX 1080/1070 fe models, deliver the ultimate in cooling performance. Featuring 0.5mm internal fin construction, the Pacific v-gtx 10 series is manufactured with cnc machined copper base, nickel plating for ideal protection and supporting G1/4 threaded fittings. Included hardware supports users for easy installation. See the true power of liquid cooling with the Thermaltake Pacific GTX 10 series GPU water block.

The Thermosphere cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate’s nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance. Base is made of nickel plated electrolytic copper, backbone is made from laser cut brushed stainless steel plate while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed in each exchangeable mounting plate and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. GPU compatibility: EK-Thermosphere series waterblocks supports majority of modern nVidia and AMD high-end graphics cards via exchangeable mounting plates. The product however comes factory pre-fitted with mounting plate G80 (mounting pattern 58x58mm) and ready for use on modern nVidia GeForce GTX graphics cards only. Please check compatibility at EK’s CoolingConfigurator. To use this product on AMD and other nVidia graphics cards it is mandatory to purchase additional mounting plates: – G92: 53x53mm – R600: 54x54mm – GF560: 51x61mm – G200: 61x61mm Enclosed in the box: – EK-Thermosphere series water block /w pre-installed G80 mounting plate – mounting mechanism – thermal grease (TIM) EK-Ectotherm (1g)

* Full cover GPU block, cooling GPU core / VRAM / MOS.
* Build-in 5v 3pin led strip.
* Copper base and clear acrylic top.
* Package included thermal pad for VRAM and MOS and thermal silicone grease pad for core.
* End caps included.
* Fittings shown on image not included.
* Option: 12v 4pin led strip.
Compatible List (Including but not limited to the following models)
MSI GeForce GTX1080 Gaming X 8G
MSI GeForce GTX1080 Armor 8G OC
MSI GeForce GTX1080 Duke 8G
MSI GeForce GTX1080 Armor
MSI GeForce GTX1070Ti Duke 8G
MSI GeForce GTX1070Ti Gaming 8G
MSI GeForce GTX1070Ti Armor 8G
MSI GeForce GTX1070Ti Titanium
MSI GeForce GTX1070 Duke 8G
MSI GeForce GTX1070 Gaming X 8G
MSI GeForce GTX1070 Armor 8G OC
MSI GeForce GTX1060 Gaming X 6g
MSI GeForce GTX1060 Gaming X Plus

100% new, fine workmanship, simple sense is very strong!
Bykski N-AS1080STRIX-X for Pcasl ASUS ROG STRIX GTX 1080 GTX1070 GTX1060 Graphics design,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Video card water cooling block is free to change direction, convenient players form a SLI&CF firefight system, can be in series or in parallel.
parts list:
fast twist X 2
plugs X 2
grease and thermal paste X 1
mounting screws X 1
With RBW LED X 1
Compatible graphics card type: ASUS ROG-STRIX-GTX 1080Ti-O11G-GAMING
Compatible graphics card type: ASUS ROG STRIX-GTX1080-O8G-GAMING
Compatible graphics card type: ASUS ROG STRIX-GTX 1070-O8G-GAMING
Compatible graphics card type: ASUS ROG STRIX-GTX 1070-8G-GAMING
Compatible graphics card type: ASUS DRAGON GTX 1070-O8G
Compatible graphics card type: ASUS DRAGON GTX 1070-TOP8G
Compatible graphics card type: ASUS ROG STRIX-GTX 1060-O6G-GAMING
NOTE:Before buying, please contact the seller, the GPU WATER COOLING BLOCK compatible models, factory often modify graphics PCB, so in order to avoid after the

The Bykski nVidia 1060 Public Version Full Coverage GPU Water Block is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series.
Specifications

Compatibility

Parts Included

Warnings

This is a repair or replace only item. Returns not accepted on compatibility issues or block has had water/fluid run through it. Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions.
Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.

Conclusion

By our suggestions above, we hope that you can found 1060 water cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!