dailyspect 
Nowadays, there are so many products of 5005 water filter in the market and you are wondering to choose a best one. You have searched for 5005 water filter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 5005 water filter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
39,273 Reviews Scanned
Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment Cartridge
This Pentek DGD-5005-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 20 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-1/2 inches (508 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"
- Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
- Combines two separate gradient layers for higher efficiency and dirt-loading capacity
- Spun polypropylene for resistance to chemicals and bacteria
- Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).
This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 10 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 10 x 4-1/2 inches (254 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek DGD-5005-20 5 Micron 20 x 4.5 Comparable Whole House Sediment Water Fi.
- QUICK & EASY INSTALLATION: Quick and easy installation into your 20 x 4.5 Inch Big Blue whole house filtration system
- 6 MONTH FILTER LIFE: By replacing your water filter every 6 months , depending on the quality of your water, you keep your water tasting great with the Tier1 SDC-45-2005
- HIGH QUALITY FILTRATION: This Tier1 155358-43 spun-polypropylene sediment filter reduces sediment, dirt, particulates, sand, and silt
- REPLACEMENT PART FOR MANY PART NUMBERS & MODELS: This filter is comparable to many 5 Micron 20 x 4.5 sediment filter. Replace your old Pentek DGD-5005-20 or Liquatec SDF-45-2005 with a Tier1 SDF-45-2005
- 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
Aquaboon 6-Pack of 5 Micron 10" Big Blue Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration | Compatible with W15-PR, HD-950, WFHD13001B, GXWH35F, GXWH30C, HF45-10BLBK10PR
- ???? [Dimensions] 10 inches x 4.5 inches – 6-PACK Of 5 Micron Sediment Water Filter. Fits most 10 inch Big Blue Water Filter housings.
- ???? [Quality Filtration] Made of thermally bonded 100% Pure POLYPROPYLENE Microfibers. Whole house sediment filtration. Contains no binders, agents, solvents, antistatic materials or wetting agents. 5 zones of filtration to ensure quality and remove more contaminants, large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles.
- ???? [Lifetime] 4 – 6 months / 20000 – 30000 gallons (depending on the water quality). Replace for great taste of your water.
- ???? [Compatible Replacement Filters] 3M 70020162437, CFS810, American Plumber WDGD-5005, 155357-51, Apex RF-1012, Aqua-Pure AP810, AP814, AP811, AXEON Membranes 200635, ClearChoice 84632, Cuno CFS810, Everpure DEV9108-44, 9108-44, DGD-5005, Filter Specialist CMMF05975-45W1, Filtrete 647632, 4WH-HDGR-F01H, Flexeon 200635, Hydronix SGD-45-1005, SDC-45-1005, Ideal H2O 738356, Liquatec SDF-45-1005, Neo-Pure MB-45098-05, Pentair DGD-5005, 9108-44, DEV9108-44, Pentair Water P5-BB, Pentek DGD-5005, etc
- ???? [COMPATIBLE HOUSINGS] American Plumber W10-PR, W15-PR, Aqua-Pure AP801, Culligan HD-950, GE GXWH35F, GXWH30C, GXWH-30C, GXWH-40L, GNWH-38F, RFC-BBSA, HDSFI, GXWH-35F, DuPont WFHD13001B, Hydronix HF45-10BLBK10PR, Pentek DGD series, RFC series, Whirlpool WHKF-GD25, WHCF-WHPLBB, Waterite Excelpure PL10B30, etc.
Big Blue Sediment Replacement Water Filters 5 Micron 4.5”x20" Cartridges WELL-MATCHED with 155358-43, 2PP20BB1M, AP810-2, FPMB-BB5-20, FP25B, P5-20BB, SDC-45-2005 (2 Pack, 20")
- ???? Big Blue 20-inch 5 Micron Sediment Water Filter – Used for effectively removing most sediments from water
- ???? This is a filter for pre-filtration of water and fits all 20 inch Big Blue Water Filter housings and WELL-MATCHED Models of Cartridges: Hydronix 2PP20BB1M, AquaPure AP810-2, Everpure EV910837, Filter Specialist CMMF0520-45W1, , Watts FPMB-BB5-20, FreshWaterSystems MBGC-45200-05, Hydronix SDC-45-2005, iSpring FP25B, Neo-Pure MBGC-45200-05, Pentair DEV910837, EV910837, P5-20BB, Pentek 155358-43, CMB-520-HF, Heritage Parts TMP5618907, Liquatec SDF-45-2005, Valuetrex VX05-20BB
- ???? Product Lifetime – 20,000 gallons – replace two or three times a year – depending on your water quality
- ???? This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations. Dimensions: 20 inches x 4.5 inches (50.8 cm x 11.43 cm)
- ???? WELL-FIT FOLLOWING HOUSINGS: Pentek BBFS-222, 150235 and 150233, Water Filters Depot (WFD) H-20BB-1PR, Geekpure BB-20B, iSpring HB28BX2 and WGB12B, HFPP-1-PR20, Premier Water Systems WF45-20-1NPT, SimPure RSWHB002Z_S8, Aquaboon AB-WH20BB, H-H201BBE, H2O Splash WHBB20T1BL, Hydronix HX-HF45-20BLBK10, Max Water B078FPN68M
Aquaboon 4-Pack of 5 Micron 10" Big Blue Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration | Compatible with W15-PR, HD-950, WFHD13001B, GXWH35F, GXWH30C, HF45-10BLBK10PR
- ???? [Dimensions] 10 inches x 4.5 inches – 4-PACK Of 5 Micron Sediment Water Filter. Fits most 10 inch Big Blue Water Filter housings.
- ???? [Quality Filtration] Made of thermally bonded 100% Pure POLYPROPYLENE Microfibers. Whole house sediment filtration. Contains no binders, agents, solvents, antistatic materials or wetting agents. 5 zones of filtration to ensure quality and remove more contaminants, large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles.
- ???? [Lifetime] 4 – 6 months / 20000 – 30000 gallons (depending on the water quality). Replace for great taste of your water.
- ???? [Compatible Replacement Filters] 3M 70020162437, CFS810, American Plumber WDGD-5005, 155357-51, Apex RF-1012, Aqua-Pure AP810, AP814, AP811, AXEON Membranes 200635, ClearChoice 84632, Cuno CFS810, Everpure DEV9108-44, 9108-44, DGD-5005, Filter Specialist CMMF05975-45W1, Filtrete 647632, 4WH-HDGR-F01H, Flexeon 200635, Hydronix SGD-45-1005, SDC-45-1005, Ideal H2O 738356, Liquatec SDF-45-1005, Neo-Pure MB-45098-05, Pentair DGD-5005, 9108-44, DEV9108-44, Pentair Water P5-BB, Pentek DGD-5005, etc
- ???? [COMPATIBLE HOUSINGS] American Plumber W10-PR, W15-PR, Aqua-Pure AP801, Culligan HD-950, GE GXWH35F, GXWH30C, GXWH-30C, GXWH-40L, GNWH-38F, RFC-BBSA, HDSFI, GXWH-35F, DuPont WFHD13001B, Hydronix HF45-10BLBK10PR, Pentek DGD series, RFC series, Whirlpool WHKF-GD25, WHCF-WHPLBB, Waterite Excelpure PL10B30, etc.
American Plumber WDGD-5005 American Plumber Dual-Gradient Polypropylene 10" Cartridge
Whole house heavy duty filter cartridge.
Tier1 Replacement for Hydronix DGD-5005-20 SDC-45-2005 5 Micron 20 x 4.5 Spun Wound Polypropylene Water Filter 6 Pack
- QUICK & EASY INSTALLATION: Quick and easy installation into your 20 x 4.5 Inch Big Blue whole house filtration system
- 6 MONTH FILTER LIFE: By replacing your water filter every 6 months , depending on the quality of your water, you keep your water tasting great with the Tier1 SDC-45-2005
- HIGH QUALITY FILTRATION: This Tier1 155358-43 spun-polypropylene sediment filter reduces sediment, dirt, particulates, sand, and silt
- REPLACEMENT PART FOR MANY PART NUMBERS & MODELS: This filter is comparable to many 5 Micron 20 x 4.5 sediment filter. Replace your old Pentek DGD-5005-20 or Liquatec SDF-45-2005 with a Tier1 SDF-45-2005
- 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
Pentek DGD-5005-20 / DGD-5005 Compatible Water Filter Cartridges, 4.5 x 20 Inch, 5 Micron, Dirt and Sediment Removal – by KleenWater (3)
- Three Compatible Cartridges for:Pentek DGD-5005-20 and DGD-5005. Pentek 20 inch “Big Blue”
- Works well with 3M Aqua-Pure AP810-2 and AP811-2
- Perfect replacement for the Aqua-Pure AP802 housing
- 5 micron dirt sediment removal rating
- Universal 4.5 x 20 inch replacement water filter cartridge
Three Pentek DGD-5005-20 and DGD-5005 compatible replacement water filters by KleenWater. The rigid poly-spun construction effectively removes dirt and sediment with impressive flow rates of up to 40 gallons per minute. Each cartridge contains two distinct micron layers. Larger particles are trapped near the exterior and progressively finer particles towards the filter core. Thus the cartridge has exceptional solids-holding capacity and will perform longer. This replacement cartridge is an ideal choice for the value conscious consumer. Its performance is commensurate to the competition at a fraction of the cost.
Features:
~ Gradient Density Melt Blown Polypropylene Construction
~ Shrink Wrapped for Purity
~ Flow Rate 40 GPM
~ Recommended Cartridge Change Every 10 Months or Upon Substantial Pressure Reduction
~ Constructed to NSF standards
The industry universal dimension of 4.5 inch x 20 inch makes it compatible with filter housing manufacturers such as GE, Culligan, Cuno, Omni, Kenmore, Whirlpool and Ametek, among others. 5 micron dirt sediment removal rating. The smaller the micron rating the better the entrapment capability. This cartridge does not require the decorative filter end caps. KleenWater is a trademark of Pavel Water Filtration.
Conclusion
By our suggestions above, we hope that you can found 5005 water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!
