The 10 Best Water Cooling Resivoir With Drain Port

EK-AF FillPort is a panel mounted adapter, primarily designed as an extension to reservoir to function as a service port. This adapter fitting allows easier topping-off and can alternatively also serve as a drain-port.

This adapter is equipped with one standard female G1/4″ port and is closed-off by enclosed G3/8″ Plug, required Allen Key is also enclosed.

Made from black coated CNC machined brass.

Technical data:
Threading: 1 x G1/4″
Plug: 1 x G3/8″
Thread length: 7.0mm
Diameter: 33.0mm
Height: 27.0mm

ROHS 2.0 compliant!

PLEASE NOTE:

This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109846933

Thermaltake Pacific DIY LCS PR22-D5 300ml 5-Speed Adjustable D5 Pump/Reservoir Combo 3-Port G 1/4″ Thread Tt LCS Certified POM PMMA CL-W082-PL00BL-A

Thermaltake launches the Pacific PR Series tube reservoir and D5 pump for the ultimate in custom PC water cooling configurations. Featuring exceptional performance and unrivalled reliability, the PR22-D5 is manufactured from high quality POM and PMMA material to provide a crystal clear, high performance, durable solution. By giving users ideal mounting, fitting and flow, the PR22-D5 is the right choice for PC enthusiasts. Make your system a showcase for all to see with the Thermaltake Pacific PR Series.

Key Features:

• Featuring 6mm thick of the pipe wall, which can sustain the maximum pressure up to 99 PSI (Pounds per square inch).
• Heat-Resistant Acrylic Tank: Made of reliable, light weighted POM and PMMA construction, which is crystal clear and highly durable. High quality acrylic (PMMA) tube maximum working temperature: 131°F
• G ¼” Thread Ports

Specification:

• 1mm (L) x 78mm (W) x 309.7mm (H)
• Material: POM + PMMA
• Capacity: 300ml
• Maximum Head: 15 Feet
• Maximum Flow Rate: 1135 L/Hr
• Maximum Pressure: 50 PSI
• Connector: 4 Pin
• Pump Speed: 1800, 2550, 3300, 4050, 4800 RPM
• G ¼”

Support 
Please visit our website or search “Thermaltake Support” for any assistance.

The PHANTEKS R220 Reservoir is made for stand-alone reservoir with Premium materials and finest standards of craftsmanship from Phanteks. From military standard Viton O-ring seal, to the RGB LED lighting, all of our exceptionally high-quality materials are carefully selected. The R220 features a changeable cover to DDC Motor, with unique stylish aluminum fin design for reservoir cooling, ultimate mechanical design helps bubbles come out from water loop. Acrylic and Lighting make R220 for an elegant look. RGB LED type: RGB LED board , +12V, G,R,B. LED Number: 5050, 18pcs. LED Electricity Spec: 12V/0.81/9.72W. Copper Base Dimension: 3.15 x 6.30 x 0.04 inches (80 x 160 x 1mm, LxWxH). Fin Construction: 7.5mm height/3.5mm fin gap/1.5mm thickness. Capacity: 200ml. Max Water Loop Temperature: 90℃. Fill Cap: 1 x G 1/4. No. of INLET: 3 x G 1/4. No. of Outlet: 1 x G 1/4.

Dual Bay Reservoir for 5.25″ opening. Individually pressure tested. Maximum water temperature: 50C. Acrylic will deform at 60C. Supplied with black aluminium faceplate, screws, allen key, and blue LED.

Model: 5060175587664

The EK-RES X3 250 RGB is a versatile multiport standalone RGB reservoir. The number inlet/outlet port configuration options on these reservoirs and the simple but effective mounting kit make the loop building with this reservoir a straightforward process. EK-RES X3 series reservoirs are cylindrical standalone solutions, manufactured from premium quality 60mm acrylic tube and POM Acetal end caps in black color. An airtight sealing is ensured by quality EPDM rubber washers at both ends of the reservoir. With the total of six G1/4″ ports, the EK-RES X3 250 RGB reservoir make the filling, tube routing and draining, an easy task. The reservoir comes with a pre-installed anti-vortex insert and the capacity of the EK-RES X3 250 RGB variant is around 440ml of liquid. The package also includes a polyether anti-cyclone foam to optionally replace the acrylic anti-vortex insert. Compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EK-RES X3 series reservoirs come with a pair of EK design reservoir holders using adjustable fastening force controlled by the enclosed Allen key.

Model: 3830046992970

EK-AF Y-Splitter Rotary 2F-1M is a simple Y-shaped adapter fitting with 2 (two) G1/4″ BSP Female threads and one rotary G1/4″ BSP Male thread. This product is useful for splitting or combining the liquid flow in parallel configurations.

Made from black coated, hand polished brass.

Technical data:
– Threading: 2x G 1/4″ (Female), 1x G 1/4″ (Male)
– Thread length: 7.0mm (Female), 5.0mm (Male)
– Revolvable design

ROHS 2.0 compliant!

PLEASE NOTE:

This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109846995

EK-XRES 140 Revo D5 RGB PWM is a High-Performance water cooling pump with integrated reservoir. The core of the unit is the market-proven Xylem D5 PWM water pump. EK-XRES 140 Revo D5 RGB PWM series features a fully rounded see-through acrylic design thus offering stunning looks and greater usability. This allows installation at any angle within 360° of rotation. Special rubber shock absorber is used to de-couple the main pump body from the mounting clip for silent operation, free of vibration induced noise. Additionally, horizontal and vertical positioning is supported for easier tube routing possibilities. EK-XRES 140 Revo D5 RGB PWM reservoir comes preinstalled with anti-cyclone insert. Optional PU anti-vortex foam and EK-HD Tube is enclosed for additional options. Compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. This water pump/reservoir combo unit can be mounted directly on computer chassis by using enclosed Revo D5 Holder. The 60mm diameter tube is made of a high-quality acrylic material, while the reservoir bottom/pump top is CNC machined acrylic glass.

Model: 3830046992987

The Eisbecher Series consist of 20 different reservoirs that differ between usage, measurement and appearance. There are ten reservoirs within this series that consist of 99% plexi – totally unique! But the main difference between these reservoirs is within the functionality of the different sockets. These are two versions for everyone that would rather operate the pump seperately. The Bubble Down and depending on the size one or two standpipes that fascilitate the “Lighttower” effect and two lighting modules one from the top and the other one from the bottom are being used here. And there are additional three LED holes for the plexi version to maximize the lighting power. The openings to fill or drain the liquid are doubled here: One at the side and one at the bottom.

Model: 15192

The Monsoon Modular Reservoir System allows you to configure exactly the reservoir you need for your build—no more forcing your build to fit around an off the shelf, one-size-fits-all reservoir. All of the components are offered individually allowing you to mix and match different end caps, couplers, tension rods, tube lengths, mounting options, fill and drain ports, pump options, and lighting. Precision machined from aluminum, this Fill/Drain port square cap is the cap that goes on the outside of your case when you install an external fill or drain port. It is designed to work with the molded Fill/Drain Port End Cap part number MMRS-FDP-BASE (sold separately) which greatly simplifies filling and draining water from your loop. Topping off and bleeding air are also much easier. It also features a telescoping side wall seal which keeps any over fill from splashing down and inside your case and accommodates case thicknesses of 1mm to 6mm. Includes color-matched stainless counter sunk socket head cap screws, a telescoping side wall O ring seal, a color matched stop plug, 2 plug O rings, a mounting template, and a 5mm drill bit for the mounting holes.

Model: MMRS-FDP-SC-MB

The Monsoon Modular Reservoir System allows you to configure exactly the reservoir you need for your build—no more forcing your build to fit around an off the shelf, one-size-fits-all reservoir. All of the components are offered individually allowing you to mix and match different end caps, couplers, tension rods, tube lengths, mounting options, fill and drain ports, pump options, and lighting. Precision machined from aluminum, this Fill/Drain port round cap spacer is the cap that goes on the outside of your case when you install an external fill or drain port. It is designed to work with the molded Fill/Drain Port End Cap part number MMRS-FDP-BASE (sold separately) which greatly simplifies filling and draining water from your loop. Topping off and bleeding air are also much easier. It also features a telescoping side wall seal which keeps any over fill from splashing down and inside your case and accommodates case (or spacer) thicknesses of 7mm to 12mm. Includes color matched stainless counter sunk socket head cap screws, a telescoping side wall O ring seal, a color matched stop plug, 2 plug O rings, Laser cut spacers in 6mm, 3mm, and 1mm thicknesses, a mounting template, and a 5mm drill bit for the mounting holes. Note: This product works essentially the same as the standard cap but adds an extra 6mm of depth (for 12mm total) allowing you to fill in any space needed when running your MMRS reservoir from the very top of your case to the very bottom, (or front to back or side to side of course). Using two of these (one on each end of your reservoir) allows you to absorb 12mm to 24mm of space. It includes acrylic spacer rings so that you can get a custom fit that looks like it was built specifically for your case and chosen configuration.

Model: MMRS-FDP-RCS-WH

Conclusion

By our suggestions above, we hope that you can found water cooling resivoir with drain port for you.Please don’t forget to share your experience by comment in this post. Thank you!