dailyspect 
Nowadays, there are so many products of computer case cooling and power supply kit in the market and you are wondering to choose a best one. You have searched for computer case cooling and power supply kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings computer case cooling and power supply kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b
- 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 / pi 2 (Not include Pi Board)
- Case has the designed layout for the Raspberry pi 3 model b+ and will perfectly protect your pi components
- Made of Acrylic, the pi case makes sure that won’t block Pi’s Wifi / Bluetooth signal
- Accurate plugs on the case are available to connect Pi’s GPIO, HDMI, USB, SD, Power Supply etc ports
- Specially Come with mini fan and 3 pcs heatsinks for quick cooling CPU/ROM/RAM, also has a stable 2.5A power supply with a handy on/off switch on the 1.5m long cable
(The Same Case Kit for RPI 4, please go to: http://www.amazon.com/dp/B07TTN1M7G)
This is 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 /pi 2 .
Product Feature:
1. All ports are available
Special design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for RPi access.
2. Better heat dissipation performance
The mute mini cooling fan and aluminum heatsinks have stronger heat radiation while the pi board working.
3. Good quality material
The raspberry pi 3 case with clear acrylic layers is more durable to protect your RPi board!
4. Crystal-like appearance
Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.
Package Included:
1x Acrylic Case for Raspberry Pi 3 model B+ / 3 / 2
1x Mute Cooling Fan
1x 5V 2.5A Power Supply
3x Aluminum Heat Sinks 14*14*6mm x 2(Large) 9*9*5mm x 1 (small)
4x Metal Screws and Bolts for the case
Related Item:
Miuzei Raspberry Pi 3 B+ Case with Fan (The same case without power supply): http://a.co/1YTEbRO (B07C6CFL2B)
Miuzei Raspberry Pi Camera Module: http://a.co/eBHmA2y (B07BTP8VXL)
Note: Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable
Please make sure the layer 3 was installed right, if you installed it 180 degrees backwards, it will make all the difference in the power plug fitting.
(1) Small components inside, please away from young kids below 3yrs.
(2) Kindly to know this case can’t fit for ASUS tinker board.
Any question there, please don’t hesitate to contact us to get support and services via Buyer Message or Q&A
Similar items with 4 stars and above
Thermaltake Versa N24 Black ATX Mid Tower Gaming Computer Case Chassis with Power Supply Cover, 120mm Rear Fan preinstalled. CA-1G1-00M1WN-00
- Top Mount I/O Ports: 1x USB 3.0, 2x USB 2.0, 1x Headphone, 1x Mic Front Ports
- Power Supply Cover: Streamline your cable management with the included Power supply cover to hide cable clutter
- Storage Options: 2x External 5.25 inches Drive Bays, 2 x 2.5 inches / 3.5 inches Internal Drive Bays (with HDD Tray) with back panel accessible hidden drive access
- Air/Liquid Cooling Configurations Options: 1 x 240mm radiator(Top/Front). 1 x 120mm radiator (Rear), 2 x 120mm or 2 x 140mm Fans locations (Top) with 2 x 120mm Fan locations (Front)
- Complete solution: Support up to 240mm radiator liquid cooling for ideal CPU cooling application, up to 415mm long graphic card (without front fan(s))
Title:
Thermaltake Versa N24 Black SPCC ATX Gaming Mid Tower with PSU Cover Computer Case CA-1G1-00M1WN-00
Product Description:
Perfect for the first build or the next one, the Versa N24 Mid Tower Chassis shows its horse power with a unique piping system ready for the starting line. Gain more with cooling performance, tool-free installation and options for both air and liquid cooling configurations at an affordable price. With extended GPU fitment up to 415mm lengths, build your next PC hot rod built for gaming. Designed for maximum ventilation from top to bottom the Versa N24 is a great choice, at the right price.
Key Features:
Fans Included:
Clearance:
Fan Configurations: (Optional)
Front:
1 x 120mm or 2 x 120mm or 1 x 140mm or 2 x 140mm
Top:
1 x 120mm or 2 x 120mm
Rear:
1 x 120mm
Radiator Configurations: (Optional)
Top:
1 x 120mm or 1 x 240mm
Front:
1 x 120mm or 1 x 240mm or 1 x 140mm or 1x 280mm
Rear:
1 x 120mm
Support
Please visit our website or search "Thermaltake Support" for any assistance.
Similar items with 4 stars and above
CORSAIR RMX White Series (2018), RM750x, 750 Watt, 80+ Gold Certified, Fully Modular Power Supply – White
- 80 PLUS Gold Certified: High efficiency operation for lower power consumption, less noise and cooler temperatures
- Tuned for Low Noise Operation: A specially set fan curve ensures that, even at full load, fan noise is kept to a minimum
- Zero RPM Fan Mode: At low and medium loads the cooling fan switches off entirely for near-silent operation
- 100% All Japanese Capacitors: Premium internal components ensure unwavering power delivery and long-term reliability
- Fully Modular, Flat Cables: Flexible fully modular, flat white cables for easy cable routing
CORSAIR RMx White Series fully modular power supplies are built with the highest quality components to deliver 80 PLUS Gold efficient power to your PC. Using only Japanese 105 Degree capacitors, users can depend on an RMx PSUs’ long life and reliability, backed by a ten-year warranty. Zero RPM Mode means an RMx series PSU is virtually silent at low and medium loads, and even at maximum power, a low noise fan ensures quiet operation. Fully modular, flat white cables make PC builds and upgrades easy, as you only need to install the cables your system requires. Quiet, efficient and dependable, an RMx PSU has everything you need to power your high-performance PC for years to come. Tech Support# 1-888-222-4346 opt #1.
Similar items with 4 stars and above
Miuzei Case for Raspberry Pi 4 with Fan and 5V 3A USB-C Power Supply, 4 × Aluminum Heat Sinks for Raspberry Pi 4 Model B(Pi 4 Board Not Included) – Clear/Wood Case
- – Miuzei Acrylic/Wood Case for Raspberry Pi 4 Model B – best looking layered case for protecting the RPi 4. It looks nice, cools effectively and makes sure that won’t block the signal for onboard wireless networking and Bluetooth.
- – Easy access to the USB-C power connector, dual micro HDMI, Audio/Video, USB and Ethernet ports, GPIO port, Camera Cable and access to the micro SD card.
- – 3A USB-C Power Supply with 1.5m power cable is specially designed and tested for the Raspberry Pi 4. The power toggle switch is a great convenience for shutting down and powering the RPI 4 off.
- – Come with fan as well as a set of 4 Aluminum Heat Sinks to help keep the Raspberry Pi 4 running cool within an acceptable temperature range.
- – Kit Includes Miuzei Raspberry Pi 4 Clear/Wood case, 5V 3A USB-C Power Supply, Cooling Fan, 4 Aluminum Heat Sinks, 4 Rubber Feet, Screwdriver for Case
Miuzei Raspberry Pi 4 Clear/Wood case with fan, 5V 3A USB-C Power Supply, Aluminum Heat Sinks.
Specifications
Crystal-like appearance
Best looking layered case you’ll get- Made of Acrylic, the pi case makes sure that won’t block the signal for onboard wireless networking and Bluetooth.
All ports are available
Easy access to the USB-C power connector, dual micro HDMI, Audio/Video, USB and Ethernet ports, GPIO port and access to the micro SD card
3A USB-C Power Supply
The 3A USB-C Power Supply is specially designed and tested for the Raspberry Pi 4, 1.5m power cable with ON/OFF switch which means less messing around with the cable.
Better heat dissipation performance
The fan with the heat sinks tested in various typical desktop activities with the ambient room temperature at 5V, the temperature of the CPU could drop around 25-30 Degrees .
Rubber Nub-Feet
The rubber feet on the bottom of the case, elevate the nuts from contacting the surface and provides a stable platform that allows air to circulate on the bottom side of the board.
Kit Includes
– Miuzei Raspberry Pi 4 case
– 3A USB-C Power Supply
– 30mm Cooling Fan
– Set of 4 Aluminum Heat Sinks
– Set of 4 Rubber Feet for Case – Screwdriver
-Paper Installation Instruction
Related Item
The clear/black case kit:
http://www.amazon.com/dp/B07TTN1M7G
http://www.amazon.com/dp/B07VDHTVGP
Note：
Please follow the paper instruction or Youtube video to make sure you installed it right.
Please peel off the protective films on the top and bottom layers before you set it up, the film is very thiny and not easily noticeable.
The case ONLY Compatible with Raspberry Pi 4.
NZXT H510 – Compact ATX Mid-Tower PC Gaming Case – Front I/O USB Type-C Port – Tempered Glass Side Panel – Cable Management System – Water-Cooling Ready – Steel Construction – White/Black
- NEW FEATURES: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation
- ENHANCED CABLE MANAGEMENT: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
- STREAMLINED COOLING: Two Aer F120mm fans* included for optimal internal airflow and the front panel and PSU intakes include removable filters, removeable bracket designed for radiators up to 240mm – simplifies the installation of either closed-loop or custom-loop water cooling
- MOTHERBOARD SUPPORT: Mini-ITX, MicroATX, and ATX
We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-speed USB 3. 1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H510i.
Similar items with 4 stars and above
Thermaltake TtMod Sleeve Extension Power Supply Cable Kit ATX/EPS/8-pin PCI-E/6-pin PCI-E with Combs, White/Black AC-048-CN1NAN-A1
Customize your system build with the Thermaltake Toad Sleeved Extension Cable Kit. With three-layered cable design and inner certified 16 AWG wire, the Toad Sleeve Cable Extension Kit offers users more flexibility for easy installation as well as a clean and professional look. The new individually sleeved cables are heat-shrink free to ensure high-quality cable assembly and support for high currents in order to achieve superior performance and stability. With multiple color combos to choose from, each kit includes (1) 24-pin (ATX), (1) 4+4-pin (EPS), (2) 8-pin PCI-E and (2) 6-pin PCI-E with all black cable combs for a streamlined presentation. 2 Year Warranty.
Similar items with 4 stars and above
Argon One Raspberry Pi 3 B+/B Case with Cooling Fan | Includes 5.25V/3A Power Supply | Aluminum Heatsink | Power Button | Supports Retro Gaming, Movies, and Music
- SLEEK MULTIMEDIA KIT | The kit puts the case and a 5.25V/3A power supply in one convenient package. It’s a great way to start enjoying pastimes such as retro gaming, watching movies, playing music with style. The case supports Raspbian, LibreElec, Retropie, Recalbox, and OSMC.
- PASSIVE &
- ACTIVE COOLING | The Argon One itself acts as the Raspberry Pi’s heatsink for passive cooling. A proprietary software controls the fan inside the case for an active and improved temperature management.
- EASY ASSEMBLY &
- NEAT CABLE MANAGEMENT | Assembling the case with the Raspberry Pi is easy. Installing the Argon ONE Script that unlocks the full functionality of the Argon ONE in one line. All of the ports are accessed at the back, making the mini-computer manageable with minimal cable clutter and easy cleaning.
- PROPER SYSTEM SHUTDOWN | A proper power button is installed on the case to prevent file damage. Safe Shutdowns, Reboots, and Forced Shutdowns are built in features.
- MAGNETIC REMOVABLE TOP &
- ACCESS TO GPIO | The PCB Board built into the case provides separate power sources to the fan and power switch, as well as extending the GPIO pins to use the case in multiple projects. A magnetic removable top makes the pins safe when they aren’t in use.
Similar items with 4 stars and above
Thermaltake V200 Tempered Glass RGB Edition 12V MB Sync Capable ATX Mid-Tower Chassis with 3 120mm 12V RGB Fan + 1 Black 120mm Rear Fan Pre-Installed CA-1K8-00M1WN-01
- LIGHT UP THE SYSTEM: 3 pre-installed 120mm 12V motherboard sync RGB fans (Sync with ASUS, Gigabyte, MSI, ASRock, and Biostar 12V Header Mobo) + 1 black fan at back
- BUILT-IN DUAL-MODE 12V SYNC CONTROLLER: Control light via I/O Port RGB Light Button (16 LED modes/7 color) or via 12V header RGB sync motherboard (Sync with ASUS, Gigabyte, MSI, ASRock, and Biostar 12V Header Mobo)
- 16 LED MODES THROUGH I/O PORT RGB LIGHT BUTTON: RGB Mode, Single Color Mode (7 Colors), Breath Mode (7 Colors), Light Off [7 Colors: Red, Yellow, Green, Cyan, Blue, White, Purple]
- CLEAR VIEW OF PC GAMING: 4mm thick tempered glass side panel with standard mounting
- BUILT-IN PSU COVER: Cover all your cables for a Professional Look combined with a window to show off your Colorful power
- DRIVE BAYS: 3 x 2.5″ with HDD Bracket + 2 x 3.5″ with HDD Tray
- Supports Mini ITX, Micro ATX, and ATX Motherboard
- I/O PORT: USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1, RGB Light Button
- OUTSTANDING EXPANDABILITY: 7 expansion slot. Max CPU cooler height: 160mm / Max VGA length: 380mm / Max PSU length: 170mm
- DIMENSION: 17.6″(H) x 8.3″(W) x 17.3″(D), 15.65lb
Designed for PC builders who want a sleek, custom looking case with great airflow and a crystal clear tempered glass panel – the Versa V200 TG RGB is the ultimate mid-tower. This special RGB version comes with three 120mm 12V RGB front fans that are dual-mode controllable either through the front I/O panels, or by connecting to compatible Asus Gigabyte, MSI, ASRock or Biostar motherboards. The V200 TG RGB supports a huge range of air and liquid cooling hardware, high-end GPUs and even a handy PSU cover in the basement. 3 year warranty.
Specifications
• Dimensions (H x W x D): 17.6” x 8.3” x 17.3” / 446 x 204 x 439 mm
• Maximum GPU Length: 380mm
• Maximum CPU Cooler Height: 160mm
• Maximum PSU Length: 170mm
• Case Type: Mid Tower
• Color: Black
• Case Material: SPCC
• Side Panel: 4mm Tempered Glass Panel x1
• Internal 2.5”/ 3.5” Drive Bay: 3 x 2.5” / 2 x 3.5“
• Expansion Slots: 7
• I/O Port: USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1, RGB Button x 1
• Pre-installed Fans: (Rear) 120 x 120 x 25 mm fan x 1 / (Front) 120 x 120 x 25 mm fan x 3
• Air Cooling:
• Front: 3 x 120mm / 2 x 140mm
• Top: 2 x 120mm / 2 x 140mm
• Rear: 1 x 120mm
• Liquid Cooling:
• Front: 1 x 240mm / 1 x 280mm
• Rear: 1 x 120mm
• Warranty: 3 Years
Miuzei Case for Raspberry Pi 4 with Cooling Fan, 4 × Aluminum Heatsinks, 5V 3A USB-C Power Supply with ON/Off Switch for Raspberry Pi 4 Model B
- – 9 Layers case for Raspberry Pi 4 Model B, perfectly protect your pi components(Raspberry Pi board is not included)
- – Accurate plugs on the case are available to connect Pi’s GPIO, HDMI, Micro USB, SD Card, Power Supply etc ports
- – Made of Acrylic, the pi case makes sure that won’t block Pi’s Wifi / Bluetooth signal
- – Especially with mini fan and 4 aluminum heatsinks for fast cooling of CPU, GPU and RAM
- – Stable 3A power supply with a handy on/off switch on the 1.5m long cable. Package Included: Raspberry Pi 4 Case, 3A USB-C Power Supply, Fan, 4 Pcs Heatsinks, Rubber Feet. 【Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable】
ROSEWILL Micro ATX Mini Tower Computer Case with PSU, steel computer case + 400w power supply, Front I/O: 2x USB 3.0 and Audio In/Out and 90mm rear case fan (R521-M)
- PC Case + Power Supply: Excellent mini tower computer case with 400W power supply (psu) delivers the best solution for your computer system.
- Easy Access I/O Port: This is an office computer case with 2 x USB 3.0, Audio In/Out Front Ports to offer the easy access to this computer case at the front.
- Excellent Airflow: With 1 x 90mm rear computer case fan, ROSEWILL R379-M offers the optimized ventilation to our users for long time operation.
- Stylish Aluminym Look: This mini tower has an aluminym-look front panel. With solid and cool front panel, R379-M gives you a better option of your office desktop.
- Sturdy Construction: To level up the experience for users, R379-M is a solid body with vented PCI-E slots and perfectly ideal for intel and AMD systems
Rosewill Micro ATX Mini Tower Computer Case with 400W Power Supply.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found computer case cooling and power supply kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
