The 10 Best Ice Maker Line Fittings

Why choose the ice maker kit?1. This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. 2. The tested design allows users to connect and disconnect quick and easy without the need of any other tools. Applications include multiple potable liquids such as reverse osmosis drinking water, beverage dispensing, coffee machines, RV and Marine, misting systems, ice makers and many more. 3. If you have a reverse osmosis system and a refrigerator with an ice maker and/or water dispenser, this kit is perfect for you. A reverse osmosis filtration system hands down out performs a single inline carbon filter found in most popular refrigerators. So it’s smart to connect RO with your refrigerator’s water line. Parts List: -1/4 inch water tubing (25 ft. ) -a 1/4″ x 1/4″ x 1/4″ “T” valve -an inline 1/4″ x 1/4″ shut off valve -a compression fitting -a independent inline 1/4″ x 1/4″ valve 100% quality assurance. If you have any problems, please contact us, we’ll reply to you in 24 hours.

What is it?

PureSec 2018 HV1414 mini white plastic quick fitting straight inline shut off Ball valve Hand valve is made of 100% BPA Free thermoplastic material (Polypropylene), which is suitable for use in hot(140°F Max) and cold (33°F Min.)water applications. It adopts Push-Fit technology, which allows users to connect and disconnect quick and easy without the need of any other tools. It gives full flow and positive shut off without leakage, which is very easy to install. Valve act is 90 degrees, full on to full off, with no seepage.This little valve fits standard tubing OD 1/4″Copper, CPVC, PEX and PVC tubing for most RO systems

Where to use it ?

Applications include RO system, beverage dispensing, refrigerator ice maker, coffee machine etc. This quick connect fitting is perfect for hooking up a kitchen water supply , it isolate water line without shutting off all the cold water to the kitchen. It will save you lots of work getting to replace your in-line water filter without having to turn the water off in the basement or under the sink.You can also use it to run the RO System to the fridge ice maker.

How to use it ?

Just pop in your 1/4″tubing into either end, pushing until it won’t go in. To remove, just push in the outer circle on either end and pull right out. You need to make sure the tubing is cut squared to insure no leaks.

PureSec 2018 HV1414 mini white plastic quick fitting straight inline shut off Ball valve Hand valve is quality, reliability, and economy in potable water service.

What’s in the package?

PureSec 2018 HV1414 mini white plastic quick fitting straight inline shut off Ball valve Hand valve

“C” clip

The SharkBite ice maker installation kit has everything you need to install the water supply to your ice maker. The kit includes 1 SharkBite 1/2 in. Service slip tee, one 1/2 in. X 1/4 in. (3/8 in. O.D.) push-to-connect angle stop valve, a 10 ft. Coil of 1/4 in. Pex pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression connector, and a 1/2 in. And 1/4 in. Disconnect clip to remove the pipe from the fitting if needed. The SharkBite service slip tee allows you to remove up to 2 in. Of your existing copper or cpvc line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. Pex coil connects to the push-to-connect angle stop valve 1/4 in. Outlet and the 1/4 in. Ice maker connector which will thread onto your ice maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.

The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.

Complete Ice Maker And Humidifier Installation Kit | 25’ PEX Tubing, With Easy To Use Stop Tee, Includes Everything Necessary For A Complete Installation

This high-quality ice maker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system.
You will never have to spend money on small, ineffective and expensive refrigerator filters ever again.
his ice maker kit includes everything you will need to quickly and easily connect your refrigerator and reverse osmosis system.
t includes one quick-connect “tee” fitting, one quick-connect shut off ball valve and 16 feet length of 1/4 inch food-grade poly tubing.
he “tee” fitting diverts the ro purified water between the fridge and ro faucet giving access to both outlets.
The ball valve can be used to shut off water flow to the fridge.
and most standard under-counter reverse osmosis systems using 1/4 inch tubing and connectors.

Product Description

LASCO 37-1821 Ice Maker Inline Filter, 2-Inch Diameter x 10-Inch, 1/4-Inch OD Compression Connection. Inline ice maker filter. 1/4-Inch compression connection fittings. 2-Inch x 10-Inch. Use to filter taste in water. Filters 1500 gallons. Use to filter taste in water.

From the Manufacturer

LASCO 37-1821 Ice Maker Inline Filter, 2-Inch Diameter x 10-Inch, 1/4-Inch OD Compression Connection. Inline ice maker filter. 1/4-Inch compression connection fittings. 2-Inch x 10-Inch. Use to filter taste in water. Filters 1500 gallons. Use to filter taste in water.

Product Description

The Eastman 41033 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 5-feet long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 5′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 5′ Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

What is it?

PureSec 2017 20WP1/4TU-BLUE NSF Certified CCK Blue PE Tubing/Hoses is designed for use with all push connect fittings. It offers excellent pressure and temperature ratings and has outstanding resistance to environmental stress cracking, The tubing is made of 100% BPA Free thermoplastic material (Polypropylene).The products were put through rigorous structural and material testing to help ensure they meet the standards for drinking water, Our tubing is designed for standard residential use up to 120 PSI recommended. The temperature should not exceed 150°F.

Where to use it ?

Applications include RODI or ATO system water purifier refrigerator ice maker coffee maker etc

How to use it ?

Just connect with the push fit connectors and delivery the water to the applications you need .Be sure you cut the tubing even and straight, without crimping it. Then insert straight, and all the way into the connector. If it’s crooked, or not inserted all the way, or crimped, it may leak

What’s in the package?

PureSec 2017 20WP1/4TU-BLUE NSF Certified CCK Blue PE Tubing/Hoses

Conclusion

By our suggestions above, we hope that you can found ice maker line fittings for you.Please don’t forget to share your experience by comment in this post. Thank you!