![The 9 Best Generic Refrigerator Vacuum Attachment](https://images-na.ssl-images-amazon.com/images/I/61VLIkEw8WL._SL1500_.jpg)
The 9 Best Generic Refrigerator Vacuum Attachment
Nowadays, there are so many products of generic refrigerator vacuum attachment in the market and you are wondering to choose a best one. You have searched for generic refrigerator vacuum attachment in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings generic refrigerator vacuum attachment which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
16,172 Reviews Scanned
Dryer Cleaning Kit – Generic Vacuum Hose Attachment Flexible and 28 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush. Fits vacuum hoses 1 1/4 inches or less -by Mountain Trades
- You will receive – one flexible 24 inch crevice tool cleaner and one long 28 inch brush
- VACUUM ATTACHMENT: 24″ Long – Inside measurement where your nozzle fits is 1 3/8 inches(35mm) and the tip width measures 0.6 inches(15mm) Fits vacuum hoses with a 1.25 inches or less diameter because of tapered end. ** Important – your vacuum hose needs to have a diameter of 1.25 or less to fit)** Does not fit Dyson ** See Description below for info on Shark Vacuum Cleaners. (measure the Shark vacuum hose to make sure it is 1.25 inches or less)
- Hose attachment is flexible but not flimsy – Has better airflow than others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Dryer lint brush is flexible – It is a 28 inch vent & coil cleaning tool designed specifically for reaching hard-to-clean areas like down in your lint trap.
- Both the hose attachment and the lint brush are flexible. If the weather is cold when you receive the crevice tool it may be a little stiff, as it warms to room temperature it will become flexible.
Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator…… Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap…… If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool.(Doing this will cut down on clogs in your crevice tool even though the suction end of this tool is wide enough to have good airflow and still be small enough for most dryer “Lint traps” (end of tool is 15mm width) …. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. ** ….Please make sure that your vacuum hose has a diameter of 1 ¼ inches or less.** Some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool……This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit….. Does not fit Dyson vacuum cleaners…..Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work… Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure). If you are not sure if it will fit your vacuum please ask a question and we will respond.
Dryer Cleaning Kit | Dryer Vent Cleaner Remove Lint Brush (30 Inch), Generic Flexible Vacuum Hose Attachment, (25 inch) & Connector | The Best for Cleaning Your Dryer, Refrigerator and Radiator
- Complete Dryer Vent Cleaning Removal Kit – Every order comes with everything you need to get a deep clean, including 30” long cleaning brush, flexible nozzle hose attachment 25” and universal connector tool.
- Improve Dryer Efficiency – Removing debris, lint, and trash from your lint trap and tubing can reduce the risk of fires, improve drying efficiency, and extend dryer life.
- Reduce Potential Disasters – Cleaning out your dryer’s duct system, refrigerator, and fridge can help reduce the possibility for lint fires that could hurt your machine, or worse, your home or family.
- Flexible, Universal Support – The universal coupling makes our system compatible with 33mm and 35mm vacuum hoses. (Does not fit for Dyson.) While the coil brush offers vital flexibility.
- Satisfaction Guaranteed – Every Dryer Dr. vent cleaning system is backed by superior quality you can trust as well as a limited lifetime warranty you can rely on.
Keep your dryer lint trap free of potential fire hazards and debris with a smart, flexible vent cleaning kit designed for today’s modern systems.
Every time you run a load of laundry in the dryer, little fibers are left behind from your clothes that slowly begin to clog your system. And while the removable lint trap catches most of it, there is still a ton of lint, debris, and potential problems left behind. That’s why we created the Dryer Dr. Dryer Vent Cleaning Kit to help remove and eliminate this excess lint, so you can keep your family safer, reduce the potential of fires, improve dryer efficiency, and keep your dryer working harder, longer.
Product Details:
- Clean Away Lint, Debris, Dirt
- Flexible, Heavy-Duty Use
- Safe, Effective Cleaning
- Compatible with Most Vacuum Cleaners
- Satisfaction Guaranteed
Order Includes:
- Cleaning Brush (23”)
- Flexible Vacuum Hose
- Universal Connector (Fits 33mm and 35mm Connections)
Start keeping your dryer vents cleaner and clearer to improve drying efficiency and reduce safety hazards with your own dryer vent cleaning kit today by clicking ‘Add to Cart’ above.
Mountain Trades Generic Vacuum Extension Tool 24 inches – Flexible But Not Flimsy- Tapered Fitting to Fit Your Hose- Great for Cleaning Dryer Lint and Under Appliances. Includes 3 Adapters
- Perfect vacuum attachment for cleaning out your dryer lint trap, under most appliances or hard to reach areas ( Measure the width of the areas you need to clean and make sure it is wider than 5/8 inches or 15 mm)
- ADAPTERS- 3 Adapters included. We had these designed to fit most standard vacuum hoses up to 1 3/4 inches. We called these the Worlds Greatest Adapters.
- CREVICE TOOL -Flexible but not flimsy – Has better airflow than others so you will have less clogging. If it feels stiff let it warm to room temperature when you receive it.
- Heavy duty, well-built hose out does the competition. NOT INTENDED FOR DYSON. We have another product for Dyson.
- You can use the crevice tool without the adapters if it fits or use one or all 3 adapters to make it fit your vacuum hose. The adapters will fit into each other to make a variety of connections. Just try one till it fits. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches.
This Generic dryer lint vacuum attachment is a Flexible Vacuum Hose which is perfect for the hard to vacuum areas of your home….You can clean under appliances and in your dryer lint trap that has a gap of a little over ⅝ inches since the thickness of the tool is ⅝ inches, To assemble the crevice tool run hot water over the ends of the hose which will make inserting ends easy. Length of vacuum tool may vary by 1/2 inch. This tool will fit most vacuum hoses using the adapters, but please measure the end of your hose to make sure it will fit. We had these Adapters designed so that they could be used together to fit most vacuum hoses. All you have to do is try inserting one adapter in to another to make what will fit your vacuum hose. ????
Dryer Duct Cleaning Kit- Generic Vacuum Hose Attachment Flexible and 30 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush/Radiator Brush. Fits Vacuum Hoses 1 1/4 inches or Less
- You will receive – one flexible 24 inch crevice tool cleaner with 3 adapters and one long 30 inch brush
- VACUUM ATTACHMENT: 24″ Long – The tip width measures 5/8 inch check with of area you want to clean. With supplied adapters fits vacuum hoses up to 1 3/4 inches ** Does not fit Dyson **
- You can use the crevice tool without the adapters if it fits or use one or all 3 adapters to make it fit your vacuum hose. The adapters will fit into each other to make a variety of connections. Just try one till it fits. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches. You’ll probably say these REALLY are the Worlds Greatest Adapters.????
- BRUSH SPECS: Full Brush Length: 30” – Without Handle: 24-1/4” – Bristles Diameter: 1-1/2” – Steel Wire Diameter: 3/8” – Brush color: black – Handle Color: black – Longer than other brands.
- BRUSH USES: Clean your dryer lint trap, fridge coils/ condenser coils, exhaust vents, AC vents, radiators and under your appliances. Bends like a lizard in your dyer lint trap but is not too flimsy.
Dryer Vent Cleaner Kit 28 Inch Cleaner Lint Trap Flexible Refrigerator Coil Brush and Vacuum Hose Attachment Set for Vacuum Hoses 1 1/4 inches or Less (6 Pack)
- VACUUM ATTACHMENT: 24″ Long – Inside measurement where your nozzle fits is 1 3/8 inches(35mm) and the tip width measures 0.6 inches(15mm) Fits vacuum hoses with a 1.25 inches or less diameter because of tapered end. Important – your vacuum hose needs to have a diameter of 1.25 or less to fit (if the size not ,you can use the adapter to change the 32mm to 35mm )
- Hose Attachment Is Flexible But Not Flimsy : Has better airflow than others and does not clog as easy as others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Improve Dryer Efficiency:Removing debris, lint, and trash from your lint trap and tubing can reduce the risk of fires, improve drying efficiency, and extend dryer life.
- You will receive :one flexible 24 inch crevice tool cleaner and one long 28 inch brush , one dusty brush and one dyson adapter. If you are not sure if it will fit your vacuum please ask a question and we will respond.
- Design & Quality: Sturdy thick nylon bristles mounted on a galvanized wound steel bendable wire shaft moves through narrow slots picking up the lint, with a non-slip Pure Wood handle to reach inaccessible places easily – Lint vacuum remover rubber tip prevents scratches.
Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator, Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap, If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. Please make sure that your vacuum hose has a diameter of 1 1/4 inches or less. some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool, This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit. Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work, Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure).
Dryer Duct Cleaning Kit for Dyson- Generic Dyson Vacuum Hose Attachment Flexible and 28 inch Flexible Dryer Vent and Refrigerator Brush -by The Dryer Vent Store
- You will receive – one Generic Dyson flexible 24 inch crevice tool and one long 28 inch brush.
- Crevice tool 24″ Long and the end that plugs into your Dyson hose is 1-1/8 inches also the tip width measures 0.6 inches(15mm) important to know if cleaning your dryer vent lint trap on your dryer. Fits Dyson :V6, DC-24, DC-25, DC-27, DC-28, DC-29, DC-30, DC-31, DC-32,DC-33, DC-34, DC-35, DC-36, DC-37, DC-38, DC-39, DC-40, DC-43, DC-44, DC-45, DC-50, DC-52, DC-58, DC-59, DC-60, DC-61, DC-62, DC-63, DC-65, DC-74, Animal Ball (Does not fit V7, V8)
- Hose attachment is flexible but not flimsy – Has better airflow than others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Dryer lint brush is flexible – It is a 28 inch vent & coil cleaning tool designed specifically for reaching hard-to-clean areas
- Both the hose attachment and the lint brush are flexible. If the weather is cold when when you receive the crevice tool it will be stiff but as it warms to room temperature it will become flexible. Size of vacuum tool can vary by 1/2 inch.
Included in this kit is a 24 inch Generic Dyson flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator…… Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and very flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap……. If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool.(Doing this will cut down on clogs in your crevice tool even though the suction end of this tool is wide enough to have good airflow and still be small enough for most dryer “Lint traps” (end of tool is 15mm width) ………Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. ** Please make sure that your Dyson vacuum hose has a diameter of 1 1/8 and check your model in this list. Fits Dyson: V6, DC-24, DC-25, DC-27, DC-28, DC-29, DC-30, DC-31, DC-32,DC-33, DC-34, DC-35, DC-36, DC-37, DC-38, DC-39, DC-40, DC-43, DC-44, DC-45, DC-50, DC-52, DC-58, DC-59, DC-60, DC-61, DC-62, DC-63, DC-65, DC-74, Animal Ball (Does not fit:DC-07,DC-14, V7, V8)
EZ SPARES 25-inch Flexible Vacuum Crevice Attachment Crevice Tool Crevice Brush Tool Kit for All 1-1/4" or 1-3/8"(32mm-35mm) Vacuum Hoses
- Made of High Quality material:25″ Long ,Flexible,fits all vacuums accepting 1 1/4″ (32mm) or 1-3/8″(32mm-35mm) inner diameter attachments.
- Crevice tool:Great for corner, heating ducts, under furniture, along side the refrigerator.
- Flexible bends up to 180 degrees: Don’t worry about trying to contort or bend to reach those spots.”Put the brush into hot water.Soak for a while,take out and drain off.The brush will get straight.”
- Easy to clean:If you want to wash, just rinse with water.
- The brush is TPR material.Good quality and long service life.
Similar items with 4 stars and above
TDVS Long Dryer Lint Vacuum Attachment | Universal Crevice Tool 40 inches | Clean Under Refrigerator | Fits Hoses up to 1 3/4 inches 3 Adapters Included
- Need to clean all the way to the back of your appliances and in your dryer lint trap? Now you can with this 40 inch vacuum cleaning attachment.
- You will Love the extension we added to our already Proven crevice tool. It’s flexible but not flimsy. Use it as a 24 inch tool or a 40 inch tool..
- For best results in fitting your vacuum hose we have included The Worlds Greatest Adapters (at least we think they are) 3 adapters that can be used separately or combine them together to make a unique adapter to fit your vacuum hose. We designed these ourselves ????
- Hard to get the dust under your fridge? Not a problem when using your new 40 inch vacuum cleaning extension.
- If your clothes are not drying use this easy tool to clean out your dryer lint trap. Not only will your dryer be more efficient but you will have peace of mind knowing you will be taking care of the health and safety of your family by minimizing a fire hazard.
Generic Replacement Flexible Crevice Tool 6 Pcs Vacuum Attachments Accessories Brush Set for 1.25" Vacuum Hoses (32-35mm Brush Set) …
- Fits most vacuums accepting 1 1/4″ inner diameter attachments(The inner diameter is 1-1/4inch(32mm), which means the outside diameter of the wand or hose connect to it should be smaller than 1-1/4 inch(32mm) which is 31mm or 30.5mm
- Package includes: 1×Sofa Dusting Brush, 1×Horsehair Dust Brush, 1×Mini Dusting Brush, 1×2 in 1 Crevice Tool, 1×Crevice Tool, 1x Vacuum cleaner adapter,1x Flexible Crevice Tool
- Flexible Crevice Tool & 35mm to 32mm Hose Adapter can Clean those hard-to-reach places like dryer vents, heating ducts, under furniture, along side the refrigerator, under kitchen appliances or heavy furniture
- The kit is only for vacuums accepting 35mm or 32mm inner diameter attachents. Please measure and confirm your vacuum attachments inner diameter before purchasing.
- Made of high-strength and environmental protection material, durable, high-performance, and very easy to install.
An adapter help 32cm fit for 35cm(1 1/4 inch to 1 3/8 inch).
These vacuum cleaner attachment do not fit most Dyson and Hoover brands vacuum cleaner.
These vacuum cleaners are recommended that the replacement brush tools should be changed every 1-3 months
You can use these vacuum attachments to clean any part of your home, such as : Keyboard, any gaps, shutter, sofa, vent, drawer, car, pet dust, and more.
Conclusion
By our suggestions above, we hope that you can found generic refrigerator vacuum attachment for you.Please don’t forget to share your experience by comment in this post. Thank you!