Best Kitchenaid Refrigerator Flapper

Super Exquisite and Durable Icemaker Control Board Kit

How To Test The Whirlpool Ice Maker Optic Control Boards 4389102
Diagnostics 1 : First, open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned “ON”. The status LED should blink twice, pause, and then repeat (blink blink…. pause. blink blink… pause).
Diagnostics 2 : Next, with the freezer door open, hold down the flapper door on the left hand side to un-block the optics beam. With the optics beam unblocked, the status LED should light up and stay on (not blink). If the status LED continues to blink twice, then you have faulty optic control boards and they will need to be replaced.
Diagnostics 3 : If there is no status LED light, then the ice maker could be in “harvest” mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not light up, then the optic control boards will need to be replaced.

How To Replace The Whirlpool Ice Maker Optic Control Boards 4389102
Step1: First, unplug the refrigerator.Remove the three Phillips screws on the right hand side.
Step2: Disconnect the wire harness on the back side and then remove the two Phillips screws to release the receiver control board from the housing. Re-install the receiver board in the reverse order.
Step3: Next, remove the three Phillips screws on the left hand side.
Step4: Disconnect the wire harness on the top side and then remove the two Phillips screws to release the emitter control board from the housing. Re-install the emitter board in the reverse order.

Specification:
Brand: KONDUONE
Condition: 100% Brand New and never used
Package Includes:
1 x 4389102 Icemaker Sensor Control Board Kit with Instruction Manual

Product Description

This Fluidmaster Braided Stainless Steel 8-Foot (96 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.

From the Manufacturer

Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.

Replaces numbers 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102, 4389102R, AP5956767, AP3137510, PS557945, PS10064583, TJ4389102R, W10193666, W10193840, W10290817, and W10757851.
This particular Electronic Control Board is specific to Whirlpool brands including Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Glenwood, and Caloric. If your fridge is having any of these symptoms: 1) The ice maker will not stop making ice 2) The ice maker will not make ice 3) The ice maker seems to have stopped working properly, then replacing the Electronic Control Board could solve your appliance problem.

Customized For Samsung Refrigerator French door Spring. Compatible Models:

RF267AFWP, RF267HERS, RF268ABBP, RF268ABPN, RF268ABRS, RF268ABWP, RF26VABWP, RF26XAEBP, RF26XAERS, RF26XAEWP, RF4267HABP, RF4267HARS, RF4267HAWP, RF4287AARS, RF4287HABP, RF4287HAPN, RF4287HARS, RF4287HAWP, RF4289HARS, RF4289HBRS, RFG237AABP, RFG237AAPN, RFG237AARS, RFG237AAWP, RFG237ACRS, RFG238AABP, RFG238AAPN, RFG238AARS, RFG238AAWP, RFG28MESL, RFG293HABP, RFG293HAPN, RFG293HARS, RFG293HAWP, RFG295AABP, RFG295AAPN, RFG295AARS, RFG295AAWP, RFG296HDBP, RFG296HDPN, RFG296HDRS, RFG296HDWP, RFG297AABP, RFG297AAPN, RFG297AARS, RFG297AAWP, RFG297ACBP, RFG297ACRS, RFG297ACWP, RFG297HDBP, RFG297HDPN, RFG297HDRS, RFG297HDWP, RFG298AABP, RFG298AAPN, RFG298AARS, RFG298AAWP, RFG298HDBP, RFG298HDPN, RFG298HDRS, RFG298HDWP, RFG299AARS, RFG29PHDBP, RFG29PHDRS, RFG29PHDWP, RFG29THDRS,RF266,RF197ACPN/XAA

INSTALLATION:

The spring has two vertical ends to it, one is a 90 degree angle and the other is a bit crooked before it goes up a 90 degrees. The straight 90 degree angle side should face the bottom.

To install it, you need to put the top crooked side in first, pull the flap as much as you can toward the refrigerator and then install the bottom side. The spring should keep the flap flush to the door.

Ice dispenser door flap. This is not a GE OEM product. The GE brand names and logos are the registered trademarks of their respective owners. Any use of the GE brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”

Genuine Original Equipment Manufacturer (OEM) parts! This flapper guide (part number 808274201) is for refrigerators. Flapper guide 808274201 guides the mullion flapper into position when you close the door. Wear work gloves to protect your hands when installing this part. For Frigidaire, Kenmore, Electrolux, & Crosley.

ExtendFresh Temperature Management System Interior Water Dispenser Produce Preserver LED Lighting Automatic Ice Maker FreshChill Temperature-Controlled Pantry ENERGY STAR Qualified Stainless Steel Finish

Conclusion

By our suggestions above, we hope that you can found kitchenaid refrigerator flapper for you.Please don’t forget to share your experience by comment in this post. Thank you!