Which Is The Best 50 Gallon Gas Hot Water Heater

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

The Stiebel Eltron Tempra 24 Plus Tankless Water Heater features exclusive Advanced Flow Control™ German patented technology invented by Stiebel Eltron to automatically maintain water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity to ensure that hot showers will never be interrupted. Tempra 24 Plus will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE – ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 24 KW/18 KW; Min. recommended household electric service 150 A; Amperage draw: 2 x 50 A 2 x 44 A; Number and min. recommended size of circuit breakers: 2 x 50 A (DP); Number of runs and min. recommended wire size (copper): 2 x 6/2 AWG; Max. temperature rises: 92 F/82 F at 1.50 GPM, 73 F/54 F at 2.25 GPM, 54 F/41 F at 3.00 GPM, 37 F/27 F at 4.50 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l/min; Weight: 16.1 lb/7.3 kg; Nominal water volume: 0.26 gal/1l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4″ NPT.

Product Description

With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

From the Manufacturer

With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

Product Description

The NORITZ NRC66DV is a fully condensing tankless water heater with an advanced heat exchanger design and built-in controller. With flow rates up to 6.5 gallons per minute the NRC66DV delivers the highest flow rates in its category and can be vented using 3″ Schedule 40/80 PVC, PP or CPVC.  Various adapters and terminations are available to allow for a wide array of venting options.  This unit ships complete with a 6′ power cord.  IK-WV-200-1-XX-LF valve kit (required for installation) is sold separately. Common companion items include rain cap (PRC-1), atmospheric conversion kit (SVCK-3) and horizontal termination/intake PVT-HL.

From the Manufacturer

Indoor tankless water heater up to 6.5 gallons per minute. Noritz has been an innovator in the water heating industry for over 60 years. We introduced the first modern, electronically controlled tankless water heater in 1981 and we remain the leader in energy savings and superior hot water delivery today. Our goal is to empower you with the highest quality products available at superior value.

The Eccotemp i12 Liquid Propane 3 GPM Tankless Water Heater has a new revolutionary design, making it unlike any other tankless water heater on the market today. The Eccotemp i12-LP is perfect for vacation cabins, cottages, and smaller homes. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. The i12-LP is also equipped with child locking technology. The Eccotemp i12-LP is a liquid propane powered, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. This model also offers a 35-40 degree Fahrenheit temperature rise when operating at a flow rate of 4 GPM and a 77-degree Fahrenheit temperature rise at 1.5 GPM. This bundle comes with a horizontal stainless steel vent kit, ready to install and with its 110-volt UL listed power cord powering the internal exhaust fan and digital display. The i12 only pulls about 2 watts while idle and 1.07 Amps during operation, making it an ideal energy efficient appliance.

Product Features

• Sleek, modern design with black tempered glass front panel
• Equipped with child locking technology
• Pulls about 2 watts idle and 1.07 Amps during operation
• Fully automatic temperature controls
• Horizontal Stainless Steel vent kit included
• Perfect for vacation cabins, cottages, and smaller homes
• Hot water capacity range: 0.6 – 4.8 GPM; Maximum / Minimum gas rate: 25,000 – 80,000 BTUs

What’s in the box?

• 1 x 2 1/2″ 90 degree Elbow with Backflow Preventer
• 1 x Wall Thimble
• 1 x 2 1/2″ x 20″ Termination Pipe
• 1 x Instruction Manual
• 1 x 110 volt UL listed power cord

Product Description

606 series. 1650/120V. UL listed. No dip tube since the bottom inlet eliminates need for it. 1″ foam insulation/16.00 R-value. Factory installed T&P valve. Meets NAECA codes. Glass lined tank. Inlet and outlet connections on side for easier installation in tight spaces. Warranty: 6 year tank/parts.

From the Manufacturer

Series 606 electrics provide up to 4,500 watts/hr. input — plenty for all your hot water needs.

Marey GA5PORT outdoor propane gas tankless water heater can provide up to 1.5 gal. Per minute for a perfect outdoor shower at 115°F output water temperature. It is also called water heater on demand, because it heats water only when needed, saving energy. Its compact design and light weight makes easy to carry anywhere. You will only need 2-D cell Battery for the ignition and it is naturally vented outdoors. Marey has been in the water heating business since 1955, bringing tradition and innovation together. Designed in USA and it includes a gas hose with csa approved regulator.

Conclusion

By our suggestions above, we hope that you can found 50 gallon gas hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!