dailyspect 
Nowadays, there are so many products of marine high flow fuel water filter in the market and you are wondering to choose a best one. You have searched for marine high flow fuel water filter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings marine high flow fuel water filter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
27,370 Reviews Scanned
GOLDENROD 496-3/4 WATER-BLOCK FILTER (56591) Bowl Fuel Tank Filter with 3/4" NPT Top Cap
- Removes water from gasoline & diesel fuel,
- 17 micron filtration,
- Water absorbing polymers trap water
- Restricting fuel flow when it is time to replace the element,
- May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination
- Water-Block filter removes water from gasoline and diesel fuel
- Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element
- Removes microscopic particles (17 microns) of rust, sand, dirt, scale, and lint
- Zinc die-cast top cap with 3/4″ NPT pipe fittings
- See-Through bowl allows for visual monitoring of fuel flow
- Maximum recommended flow rate of 25 GPM
- working pressure up to 150 psi
WATER-BLOCK filter removes water from gasoline and diesel fuel. Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element. Also removes microscopic particles (17 microns) of rust, sand, dirt, scale and lint. Also compatible with biodiesel blends up to 20%. Zinc die-cast top cap with 3/4 inch NPT pipe fittings. See-Thru bowl allows for visual monitoring of fuel flow. Maximum recommended flow rate is 25 gpm. Gravity flow rate is approximately 5 gpm with a 24 inch head. Working pressure up to 150 psi.
Sierra International 18-7945 10 Micron Fuel Water Separating Filter for Mercury/MerCruiser and Yamaha
- Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline
- Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
- Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
- Replaces: Mercury/MerCruiser 35-802893Q01, 35-604941, 35-60494, 35-55501, 35-57250, 35-60494A5, 35-806771, 35-8052691, 35-802893Q, 35-807172 and Yamaha ABB-FUELF-IL-TR
- All Sierra parts qualify for and are covered under Sierra’s Industry Leading Customer Satisfaction Warranty
- Before Ordering, Please Verify this is the Correct Part for your Application. For Assistance, Please Call Sierra’s Tech Support at 1-877-663-8396
Sierra 18-7945 10 Micron Fuel Water Separating Filter for Mercury/MerCruiser and Yamaha
DETAILS
• Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline • Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
• Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
• Replaces: Mercury/MerCruiser 35-802893Q01, 35-604941, 35-60494, 35-55501, 35-57250, 35-60494A5, 35-806771, 35-8052691, 35-802893Q, 35-807172 and Yamaha ABB-FUELF-IL-TR
• Filter Size: Long – 4.35″ or 110.5mm
• Rating: 10 Micron
• Flow: 90 GPH
ABOUT SIERRA
Sierra is dedicated to protecting you and your investment. For 50 years Sierra, one of the most trusted names in the marine industry, has proudly been offering high quality engine and drive parts. Their products meet or exceed the original equipment part it replaces and are engineered to meet today’s high horsepower engine demands while withstanding the harsh marine environment.
SIERRA’S CUSTOMER SATISFACTION WARRANTY
All Sierra parts qualify for Sierra’s Industry Leading Customer Satisfaction Warranty. Sierra warrants its products to be free of defects in workmanship and materials for the useful life of the product. If a Sierra product fails to comply with the warranty, Sierra will repair or replace the defective product free of charge. The warranty is subject to additional terms, conditions and limitations. You can view Sierra’s full warranty located above in the Technical Specification Section.
Sierra International 18-7866 10 Micron, High Capacity Fuel Water Separator Filter for Yamaha MAR-FUELF-IL-TR
- Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline
- Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
- Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
- Replaces: Yamaha MAR-FUELF-IL-TR
- All Sierra parts qualify for and are covered under Sierra’s Industry Leading Customer Satisfaction Warranty
- Before Ordering, Please Verify this is the Correct Part for your Application. For Assistance, Please Call Sierra’s Tech Support at 1-877-663-8396
Sierra 18-7866 10 Micron, High Capacity Fuel Water Separator Filter for Yamaha MAR-FUELF-IL-TR
DETAILS
• Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline • Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
• Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
• Replaces: Yamaha MAR-FUELF-IL-TR
• Filter Size: High Capacity – 6″ or 152.4 mm
• Rating: 10 Micron
• Flow: 90 GPH
ABOUT SIERRA
Sierra is dedicated to protecting you and your investment. For 50 years Sierra, one of the most trusted names in the marine industry, has proudly been offering high quality engine and drive parts. Their products meet or exceed the original equipment part it replaces and are engineered to meet today’s high horsepower engine demands while withstanding the harsh marine environment.
SIERRA’S CUSTOMER SATISFACTION WARRANTY
All Sierra parts qualify for Sierra’s Industry Leading Customer Satisfaction Warranty. Sierra warrants its products to be free of defects in workmanship and materials for the useful life of the product. If a Sierra product fails to comply with the warranty, Sierra will repair or replace the defective product free of charge. The warranty is subject to additional terms, conditions and limitations. You can view Sierra’s full warranty located above in the Technical Specification Section.
Sierra International 18-7944 Fuel Water Separator Filter
- Ethanol blended fuel absorbs more water and loosens more particulants than regular fuels
- Proper filtration is required for every horsepower engine
- Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 micron
- All filters flow at 90 GPH to feed even the hungriest motor
Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline. Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 microns. All filters flow @ 90 GPH to feed even the hungriest motor. Sierra 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems. 10 Micron rating. Replaces Mercury – 35-807172, 35-802893Q. OEM: MERCURY MARINE 35-807172
iFJF R12T Fuel Filter/Water Separator 120AT NPT ZG1/4-19 Automotive Parts Complete Combo Filter fit Diesel Engine(Include Four Fittings)
- For R12T Marine Fuel Filter/Water Separator complete assembly.NPT,ZG1/4-19.(Include four fittings)
- The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance.
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel.
- Don’t be caught in the water without one of these diesel spin-on filters.
If you have difficulty in installing, you can go to YouTube to find the appropriate installation video:https://www.youtube.com/watch?v=LyeqTDVzY-A.
Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
Product details:
1.Don’t be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3.The inlet and out let can be feed in on the same side or in one side out the other side.
4.Check and replace regularly.
R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
New 500FG 500FH Diesel Marine Boat Fuel Filter / Water Separator
MAXIMUM FLOW RATE: 60 GPH (227 LPH)
FILTER RATING: 2, 10, and 30 micron
PORT/CONNECTION SIZE: M14*1.5
ADDITIONAL DETAIL: 15 PSI (1.03 bar) Max Pressure
DIESEL FUEL FILTER/WATER SEPARATOR FOR R12T MARINE SPIN-ON HOUSING 120AT
- For R12T Marine Fuel Filter/Water Separator complete assembly.NPT,ZG1/4-19
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- One Year Warranty
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel
Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel
equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns.
10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
Quicksilver Water Separating Fuel Filter Element
- High capacity replacement water separating fuel filter element for 8M0095669 or other Quicksilver vessel mounted kits, allows for 120 gallons per hour fuel flow
- Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your engine
- 10-micron fuel filter with over 90% efficiency removes harmful contaminants, particles and power robbing water from your fuel between your tank and the engine
- This filter contains more than 25% more filter media than non-Quicksilver filters
- Internal epoxy coating and corrosion resistant external paint for increased weather resistance
Similar items with 4 stars and above
Sierra 18-8149 10 Micron, High Capacity Fuel Water Separating Filter for Side-By-Side Fuel Pumps
- Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline
- Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
- Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
- Recommended to Prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
- All Sierra parts qualify for and are covered under Sierra’s Industry Leading Customer Satisfaction Warranty
- Before Ordering, Please Verify this is the Correct Part for your Application. For Assistance, Please Call Sierra’s Tech Support at 1-877-663-8396
Sierra 18-8149 10 Micron, High Capacity Fuel Water Separating Filter for Side-By-Side Fuel Pumps
DETAILS
• Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline
• Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
• Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
• Recommended to Prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
• Fuel Water Separator Filter Micron Rating: 10
• Replaces: Volvo Penta 3847644
• HIGH CAPACITY
• For Use with Side-by-Side Fuel Pump Applications
• Fits: Most Gasoline Applications with Electric Fuel Pump
• Some Height Restrictions May Occur when Using with Volvo Aluminum Replacement Fuel Filter Bracket, Sierra Part Number 18-7778 (Volvo Part Number 3850861
ABOUT SIERRA
Sierra is dedicated to protecting you and your investment. For 50 years Sierra, one of the most trusted names in the marine industry, has proudly been offering high quality engine and drive parts. Their products meet or exceed the original equipment part it replaces and are engineered to meet today’s high horsepower engine demands while withstanding the harsh marine environment.
SIERRA’S CUSTOMER SATISFACTION WARRANTY
All Sierra parts qualify for Sierra’s Industry Leading Customer Satisfaction Warranty. Sierra warrants its products to be free of defects in workmanship and materials for the useful life of the product. If a Sierra product fails to comply with the warranty, Sierra will repair or replace the defective product free of charge. The warranty is subject to additional terms, conditions and limitations. You can view Sierra’s full warranty located above in the Technical Specification Section.
Sierra 18-7984-1 Fuel Water Separator Kit with (1) 1/4" Stainless Steel Tall Filter and (1) Bracket
- Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline
- Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
- Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
- Recommended to Prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
- All Sierra parts qualify for and are covered under Sierra’s Industry Leading Customer Satisfaction Warranty
- Before Ordering, Please Verify this is the Correct Part for your Application. For Assistance, Please Call Sierra’s Tech Support at 1-877-663-8396
Sierra 18-7984-1 Fuel Water Separator Kit with (1) 1/4″ Stainless Steel Tall Filter and (1) Bracket
DETAILS
• Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline
• Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
• Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
• Recommended to Prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
• Sierra Brackets are Precision Machined Powder Coated Stainless Steel
• Fuel Water Separator Filter Micron Rating: 10
• Thread Size: 1/4″ or 6.4mm
• Includes (1) Universal Design, 1/4″ Stainless Steel Water Separator Bracket (Sierra Part Number 18-7777), (1) Long, 4.35″ Fuel Water Separator Filter (Sierra Part Number 18-7945) and (2) 1/4″ Pipe Plugs (Sierra Part Number 18-4256)
• Replaces: Yamaha Outboard MAR-SPRTR-HD-SS
ABOUT SIERRA
Sierra is dedicated to protecting you and your investment. For 50 years Sierra, one of the most trusted names in the marine industry, has proudly been offering high quality engine and drive parts. Their products meet or exceed the original equipment part it replaces and are engineered to meet todays high horsepower engine demands while withstanding the harsh marine environment.
Sierra’s CUSTOMER SATISFACTION WARRANTY
All Sierra parts qualify for Sierra’s Industry Leading Customer Satisfaction Warranty. Sierra warrants its products to be free of defects in workmanship and materials for the useful life of the product. If a Sierra product fails to comply with the warranty, Sierra will repair or replace the defective product free of charge. The warranty is subject to additional terms, conditions and limitations. You can view Sierra’s full warranty located above in the Technical Specification Section.
Conclusion
By our suggestions above, we hope that you can found marine high flow fuel water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!
