dailyspect 
Nowadays, there are so many products of clear 4.5x 10 water filter housing in the market and you are wondering to choose a best one. You have searched for clear 4.5x 10 water filter housing in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings clear 4.5x 10 water filter housing which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
29,968 Reviews Scanned
Geekpure 10 Inch Big Clear Water Filter Housing for Whole House Water Filtration with Wrench and Bracket 1 Inch Inlet Outlet-4.5 x 10 Inch – Clear Color (Pack of 1)
- Complete set 10 inch big clear housing,1″NPT inlet/outlet,with plastic wrench,screw and metal bracket.
- Fits all standard sized 4-1/2 inch diameter industry 10 inch whole house cartridges.Fits NSF standard,Large capacity housing for high flow applications.
- It is Installed at the main water supply and produce pure water for your entire home. Enjoy better water from every tap and every appliance in the whole house.
- ADVANTAGE-clear housing allows you to see when you need to change filters and everything else works as it should.
- Pack of 1,Filter housing only, filter cartridges are sold separately .
Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
This Pentek 158643 3/8″ #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 5 gpm | 2 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 13-3/8 x 5-3/8 inches (340 x 137 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 10” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 4-1/2 inches (254 x 114 mm) |
| Initial pressure drop at 15 gpm | 1 psi |
| Maximum temperature | 100 degrees F (37.8 degrees C) |
| Maximum pressure | 100 psi |
| Maximum dimensions (H x W) | 13-1/8 x 7-1/4 inches (333 x 184 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
10×4.5" Clear Water Filter Housing 1" NPT With Pressure Release
- For use with any standard 10×4.5 inch filter housing Coffee/Tea Filtration Systems Espresso Filtration Fountain Beverage Filtration
- Material : Polypropylene Dimensions: 6 1/4″OD x 12 1/2″ H Max Temp: 125 F Port: 1″ NPT Brass Pressure Rating: 125 PSI
- Water Filtration Fits Most RO Systems No Leak Design
DIMENSION:
Standard: (2.5 in x 5 in), (2.5 in x 10 in), (2.5 in x 20 in)
Jumbo:(4.5 in x 10 in), (4.5 in x 20 in)
FEATURES & BENEFITS:
Equipped with a black, reinforced polypropylene cap
Optional pressure relief/bleed button on inlet side of cap
Leak-proof seal
Available with clear or opaque sumps
Opaque housings offer outstanding chemical compatibility
APPLICATIONS:
Under-sink and counter top residential filtration
Pre and post reverse osmosis filtration
Recreational vehicle filtration
Food service filtration
Humidifying systems
Max Operating Temperature: 70°C
Max Operating Pressure: 8 Bars (115 PSI)
Recommended Average Operating Pressure: <6 bar="" (88="" psi)="">
Max Temperature: 50 °C
Brass Insets Size: >1 in
Big Blue CTO Carbon Block Water Filters 4.5" x 10" Whole House Cartridges (4 Pack)
- Keeps water fresh by reducing and removing iron, manganese, chlorine, hydrogen sulfide, herbicides, pesticides, and other industrial chemicals
- Universal Replacement for all 10″ Big Blue Water Filter Housing
- Product Lifetime – 10,000 gallons – replace two or three times a year – depending on your water quality
- This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations
- Dimensions: 10 inches x 4.5 inches (24.4 cm x 11.43 cm)
AQUACREST FXHSC Water Filter, Compatible with GE FXHSC, Culligan R50-BBSA, Pentek R50-BB and DuPont WFHDC3001, American Plumber W50PEHD, GXWH40L, GXWH35F Whole House Filter (Pack of 2)
- Our high-quality filters offer clean and fresh water to you and your family. **Note: For cold water only!
- It’s easy to install requiring no tools. For detailed instruction, please kindly refer to the Instruction Manual in the box.
- Enjoy fresh water by replacing your filter every 6 months or 30,000 gallons, whichever comes first will vary based on water quality. Offer reasonable price without compromising quality.
- Interchangeable with American Plumber W50PEHD, GE FXHSC, Culligan R50-BBSA, DuPont WFHDC3001, Pentek R30-BB and other brand whole house filters that use 10″ x 5″ inches filters and 9.75″ x 5″ inches filters
- Compatible with GXWH40L, GXWH30C, GXWH35F, GXWH38F, GNQH38S and most systems with 10″ x 4.5″ filters. AquaCrest is an independent brand. This filter is not an original product.
- Please note that the FXHTC water filter uses GAC(granular activated carbon) to reduce chlorine, sand, rust and other impurities in water while the FXHSC filter is made from durable pleated polypropylene, but both of them fit the most systems with 10″ x 4.5″ filters.
Geekpure 20-Inch Standard Slim Line Clear Filter Housing for Whole House Water Filtration-2.5" x 20" -Inlet/Outlet 3/4" NPT Brass
- COMPLETE-Complete 1 set 20 inch blue housing,3/4 inch ports with pressure relief button for high pressure,with plastic wrench and metal bracket.
- STANDARD-Fits all standard sized 2.5 inch x 20 inch filters.Housing only, filter cartridges are sold separately.
- APPLICATIONS-Large capacity housing for high flow applications,Used in whole house, reverse osmosis, commercial and geekpure filtration.
- Clear housing allows you to see when you need to change filters and everything else works as it should.
- Flow rate: 5-10 GPM (Depend on Feed Water Pressure),Shelf life: 5 Years.
Pentek 150560 3/4" #20 3G Standard Clear Housing with Pressure Relief
Aquaboon 1 Micron 20" Big Blue Pleated Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration | Compatible with ECP5-BB, AP810-2, HDC3001, CP5-BB, SPC-45-1005, ECP1-20BB, 2-Pack
- ???? [DIMENSIONS] 20 inches x 4.5 inches – 2-PACK Of 1 Micron Big Blue Pleated Sediment Water Filter. Universal replacement – fits most 20 inch Big Blue Water Filter housings.
- ???? [QUALITY FILTRATION] Made of 100% Pure POLYPROPYLENE Microfibers. Whole house sediment filtration. Contains no binders, agents, solvents, antistatic materials or wetting agents. This cartridge is pleated, it provides increased surface area and longer filter life. Pleated cartridge provides “depth” filtration and remove more contaminants, large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles.
- ???? [LIFETIME] 4 – 6 months / 20000 – 30000 gallons (depending on the water quality). Replace for great taste of your water.
- ???? [COMPATIBLE REPLACEMENT FILTERS] Ace Hardware 4021341, American Plumber 155184-51, W5CPHD, Ametek CP5-BB, AquaPure AP810-2, Culligan 155184, CP5-BB, CP5-BBS, CP5-BBSa, ClearChoice 84634, 84646, 84647, Cuno CFS210-2, Dupont HDC3001, Flowmax FM-BB-20-1, FreshWaterSystems PS-45097-05, PS-45200-01, OmniFilter RS15, RS-15, FreshWaterSystems PS-45200-05, Harmsco HB-20-1W, HB-20-5W, WB-HB-20-1W, WB-HB-20-5W, Hydronix SPC-45-1005, SPC-45-2001, SPC-45-2005, Keystone GPC5.
- ???? [COMPATIBLE FILTERS AND HOUSINGS] Liquatec SPF-45-1005, SPF-45-2005, Neo-Pure PS-45097-05, PS-45200-01, PS-45200-05, Pelican PBBB-P20-5, PBB-P20-1, PBB-P20-5, Pentek 255490-43, 255493-43, 255494-43, ECP1-20BB, ECP5-20BB, ECP5-BB, Purwater PC05-BB-S, ShurFlo 15-054-02, Watts FM-BB-20-5, PWPL20BBM5, WPC1FF20, etc. Fits most 20 inch Big Blue Whole House systems.
2 OF BIG BLUE WHOLE HOUSE 20 INCH X 4.5 INCH PLEATED SEDIMENT WATER FILTER REPLACEMENT CARTRIDGE (1 MICRON)
Pleated Sediment Filter Cartridge outperforms wound, spun, melt blown, resin bonded and other “depth” type filter elements. It provides increased surface area and longer filter life. Additional savings are provided because cartridge is made with 100% synthetic filter media with no binders or additives to leave a residue or contaminants.
Product Details:
Micron Rating: 1 Micron
Dimensions: 20” x 4.5”
Long life / reduced filtration costs
Cleanable and reusable
Wide range of micron ratings available
Shrink wrapped for purity
Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply.
Benefits VS Melt Blown Sediment:
Long Pressure drop, longer life, reduced filtration costs compared to wound and spun cartridges
Increased dirt holding capacity which results in longer filter life, fewer filter replacement needed, and reduced filtrations costs, comparing to other pleated cartridge suppliers
COMPATIBLE FILTERS AND HOUSINGS:
Ace Hardware 4021341, American Plumber 155184-51, W5CPHD, Ametek CP5-BB, AquaPure AP810-2, Culligan 155184, CP5-BB, CP5-BBS, CP5-BBSa, ClearChoice 84634, 84646, 84647, Cuno CFS210-2, Dupont HDC3001, Flowmax FM-BB-20-1, FreshWaterSystems PS-45097-05, PS-45200-01, OmniFilter RS15, RS-15, FreshWaterSystems PS-45200-05, Harmsco HB-20-1W, HB-20-5W, WB-HB-20-1W, WB-HB-20-5W, Hydronix SPC-45-1005, SPC-45-2001, SPC-45-2005, Keystone GPC5, Liquatec SPF-45-1005, SPF-45-2005, Neo-Pure PS-45097-05, PS-45200-01, PS-45200-05, Pelican PBBB-P20-5, PBB-P20-1, PBB-P20-5, Pentek 255490-43, 255493-43, 255494-43, ECP1-20BB, ECP5-20BB, ECP5-BB, Purwater PC05-BB-S, ShurFlo 15-054-02, Watts FM-BB-20-5, PWPL20BBM5, WPC1FF20, etc. Fits most 20 inch Big Blue Whole House systems.
3PP-10B 1-Micron Big Blue Whole House Water Filter Sediment, 10-Inch, WELL-MATCHED with RFC-BBSA, W15-PR, WFHD13001B, GXWH35F, GXWH30C, HF45-10BLBK10PR and AP817 3-Pack
- ???? Big Blue 10-inch 1 Micron Sediment Water Filter – Used for effectively removing most sediments from water
- ???? This is a filter for pre-filtration of water and fits all 10 inch Big Blue Water Filter housings and WELL-MATCHED Models of Cartridges: 3M 70020162437, American Plumber WDGD-5005, Fette Filter COMIN18JU061077, Aqua-Pure AP810, AP814 and AP811, Everpure DEV9108-44, 9108-44, DGD-5005, Filter Specialist CMMF05975-45W1, 4WH-HDGR-F01H, Hydronix SDC-45-1005, Liquatec SDF-45-1005, Neo-Pure MB-45098-05, Pentair DGD-5005, 9108-44, DEV9108-44, Pentek DGD-5005
- ???? Product Lifetime – 10,000 gallons – replace two or three times a year – depending on your water quality
- ???? This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations. Dimensions: 10 inches x 4.5 inches (24.4 cm x 11.43 cm
- ???? WELL-FIT FOLLOWING HOUSINGS: Pentek 150237, 150469, 153029 #10, BIG-CLEAR-LX-10 and A48249, Aqua Filter Plus 150237-INSTKIT, BLUONICS BLBB20GAC, BLBBC10 and BLBB10x2, iSpring HB18B, OMNIFilter BF7-S-05 and BF7-S-S06, American Plumber W10-PR, Watts W10FFPH1CBPR, SimPure RSWHB001Z_S8, AB-WH10BBN, Hydronix HX-HF45-10CLBK10 and HF45-10BLBK15, Geekpure BB-10T and BB-10B, EcoPure EPWO4, Culligan HD-950A, Aquaboon AB-WH10BB-1S10BB5M
Conclusion
By our suggestions above, we hope that you can found clear 4.5x 10 water filter housing for you.Please don’t forget to share your experience by comment in this post. Thank you!
