dailyspect 
Nowadays, there are so many products of pentek whole house water filter cartridge 5 micron in the market and you are wondering to choose a best one. You have searched for pentek whole house water filter cartridge 5 micron in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pentek whole house water filter cartridge 5 micron which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
43,649 Reviews Scanned
Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"
- Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
- Combines two separate gradient layers for higher efficiency and dirt-loading capacity
- Spun polypropylene for resistance to chemicals and bacteria
- Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).
This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 10 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 10 x 4-1/2 inches (254 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek RFC20-BB Carbon Filter Cartridge, 20" x 4-1/2"
- Reduces chlorine taste and odor in drinking water
- Granular activated carbon (GAC) media with spun polypropylene core and polypropylene end caps for strength
- Porous polyethylene 70-micron outer shell reduces carbon fines and other particles
- Initial pressure drop of 0.90 psi at a flow rate of 4 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
Pentek C1-20 Carbon-Impregnated Cellulose Filter Cartridge, 20" x 2-1/2", 5 Micron
- Reduces fine sediment and chlorine taste and odor in residential drinking water
- Nominal filtration rating of 5 microns
- Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength
- Initial pressure drop of 1 psi at a flow rate of 5 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
This Pentek C1-20 carbon-impregnated cellulose filter cartridge reduces fine sediment and chlorine taste and odor in residential drinking water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 5,000 gallons at a flow rate of 2 gallons per minute (gpm). The cartridge is made of cellulose media that has been impregnated with powdered activated carbon (PAC), with a polyester backing and external polyethylene netting for strength. It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in residential drinking water purification.
Specifications
| Nominal filtration rating | 5 microns |
| Initial pressure drop at 5 gpm | 1 psi |
| Chlorine reduction capacity | 5,000 gallons at 2 gpm |
| Operating temperature range | 40 to 125 degrees F (4.4 to 51.7 degrees C) |
| Maximum dimensions (H x W) | 20 x 2-1/2 inches (508 x 64 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 75%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek WP.5BB97P String-Wound Polypropylene Filter Cartridge, 10" x 4.5", 0.5 Micron
Pentek GAC-BB Drinking Water Filter (9-3/4" x 4-1/2")
Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment Cartridge
This Pentek DGD-5005-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 20 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-1/2 inches (508 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 155141, RFC-BB Radial-Flow Granular Activated Carbon Cartridge, 25 Micron
The Pentek 155141, RFC-BB Radial-Flow Granular Activated Carbon Cartridge Filters out chlorine and odor from drinking water. The filters has the best flow rate in it’s size and a capacity of 35, 000 gallons.
Similar items with 4 stars and above
Pentek CFB-PLUS10BB Fibredyne Modified Carbon Block 5 m Filter
- The Fibredyne CFB-Plus10BB big blue water filter cartridges are an enhanced version of our CFB product
- CFB-Plus series products are modified molded blocks manufactured using our proprietary fibredyne technology
- The result is a single cartridge that combines the benefits of both a sediment filter and a carbon block into a single cartridge
Pentek 255677-43 CFB-Plus10BB Fibredyne Modified Carbon Block 5 mic Filter 255677-43 10″ BB Pentek 255677-43 CFB-Plus10BB Fibredyne Modified Carbon Block 5 micron Filter Features: The Pentek CFB-Plus10BB Fibredyne big blue water filter cartridges are an enhanced version of our CFB product. It offers the same benefits with even greater chlorine taste and odor reduction and the highest sediment reduction found in a carbon cartridge. CFB-Plus Series products are modified molded blocks manufactured using our proprietary Fibredyne technology. This technology creates a unique filter media by attaching powdered activated carbon onto a cellulose-free synthetic fiber matrix. The result is a single cartridge that combines the benefits of both a sediment filter and a carbon block into a single cartridge. Fibredynes carbon block technology also offers up to two times the chlorine taste and odor reduction and dirt-holding capacity of traditional blocks.* In addition this technology will not release fines into the effluent stream due to a unique post-filtration layer that is fused to the carbon/fiber media blend. CFB-Plus Series cartridges are manufactured entirely from FDA-compliant materials making them an ideal choice for a wide range of residential food service commercial and industrial applications. Greater chlorine taste and odor reduction and the highest sediment reduction found in a carbon cartridge Combines the benefits of both a sediment filter and a carbon block into a single cartridge Offers up to two times the chlorine taste and odor reduction and dirt-holding capacity of traditional blocks Will not release fines into the effluent stream Manufactured entirely from FDA-compliant materials Ideal choice for a wide range of residential food service commercial and industrial applications Pentek 10″ BB 255677-43 CFB-Plus10BB Fibredyne Filter Specifications 255677-43 CFB-Plus10BB.
Pentek GAC-10 Drinking Water Filter (9-3/4" x 2-7/8")
The PENTEK-GAC-10 cartridge provides effective reduction of chlorine and bad taste and odor from your drinking water. The filter cartridge is manufactured to prevent channeling or bypass and maximize contact with the filter media. The innovative post-filter reduces carbon fines before the water leaves the cartridge for cleaner, better tasting drinking water. Ideal for general-purpose water filtration..
Similar items with 4 stars and above
Pentek RFFE-10BB Iron Reduction Big Blue Filter Cartridge
The Pentek RFFE-10BB Iron Reduction Big Blue Filter Cartridge Reduces up to 3 ppm of dissolved iron from water. For use in 10-inch Big Blue filter housings.Genuine Pentek RFFE-10BB Big Blue (10″ x 4.5″) Filter cartridge for iron reduction, helps to eliminate the orange and brown rust stains in your toilets, showers, tubs, sinks and your other plumbing fixtures in your home. Reduces up to 3 ppm of dissolved iron from water. For use in 10-inch Big Blue filter housings. 8 GPM flow rate. The RFFE-10BB filter cartridge is designed to provide an easy and effective method of reducing iron from water, which greatly improves the taste. The RFFE-10BB filter adds no harmful chemicals to your water, so it is completely safe to drink. Easily and effectively reduces up to 3 ppm of dissolved iron from water. Improves flavor and reduces the metallic taste caused by iron. Reduces the possibility of pipe and water heater damage. For use in Pentek 10-inch Big Blue filter housings. A pre sediment filter is recommended to lengthen the life of this filter as heavy sediment can plug this filter up.
Conclusion
By our suggestions above, we hope that you can found pentek whole house water filter cartridge 5 micron for you.Please don’t forget to share your experience by comment in this post. Thank you!
