Best Solar Collector Of Solar Hot Water Heater

This listing includes: 1 set of solar collector of solar hot water heater(tube length: 0.5meter, Outer Diameter of Tube:58mm, 10 Tubes), including:
1). 10 pcs of Evacuate Tubes with heat pipe
2). 1 pcs of manifold (10 holes)
3).10 pcs of tube holder
4). 1 set of aluminum bracket with bolts and nuts.
(Remark: due to it is difficult to ship after assembly, we have to ship to you before assembly.)

Duda Solar Water Heater Collectors are the most efficient solar collectors on the market. The evacuated tubes retain heat much better than flat panel collectors and therefore can work much more efficiently in cold climates. They also have a unique capability of obtaining higher efficiencies while the sun is at an angle in the east or west through passive tracking in the tubes. SRCC Certified and eligible for the 30% Federal Tax Rebate. May also be used with Duda Solar Aluminum Reflectors.

Efficient Solar Water Heating Panel with unique High Quality Construction. The thick architectural aluminum frame and the unbreakable twinwall Polycarbonate glazing make this panel rugged enough for any application. Use it for free hot water from the sun on your home, cabin, RV or for your point of use system . The sophisticated internal design allows the captured energy to be transferred to the water with minimal losses using lightweight materials. High quality insulation for efficient cold weather operation. Easy, fast and uncomplicated installation, no soldering. Build your own system using these panels or use one of our complete hybrid system kits with all the parts you need included. MADE IN USA

Solar water pool collectors are unpressurized solar collectors meant to heat the pool water directly. Cold water enters into the manifold from the pool, sinks to the bottom of the tube, and once heated a little bit, will rise back up to the top of the manifold and exit with the water flow. Pool collectors are the most efficient way to heat water because they come in direct contact with the heated surface in the tube and operate at low temperatures which will allow for minimal heat loss through the tubes and manifold, if any at all.

This listing includes: 1 set of manifold (10 holes)
Application: it can be used for the solar collector 10 tubes, (it is suitable for the tube size: diameter 58mm )

Application:
It is used for the solar hot water heating system. 1 collector array * 1 storage tank * 1 pump and auxiliary heating
Main technical data
Appearance of controller: 187mm*128mm*46mm
Power supply: AC110V+/-10%
Power consumption: less than 3W
Accuracy of temperature measuring: +/-2 Cel. degree
Range of collector temperature measuring: -10-220 Cel. degree
Range of tank temperature measuring: 0-110 Cel. degree
Suitable power of pump: 3, less than 600W
Inputs: 1* Pt1000 sensor (less than 500 Cel. degree) for collector (silicon cable less than280 Cel. degree),
2 * NTC10K, B3950 sensor (less than 135 Cel. degree) for tank, (PVC cable less than 105 Cel. degree),
Outputs: 1 relays, for circulation pumps
1 relay for electrical heater
Ambient temperature: -10-50 Cel. degree

Main functions
1.Main menu DT O & DT F Temperature difference function
2.Main menu-THET timing heating
3.TEMP Temperature main menu
4.EM Emergency collector temperature (emergency switch-off temperature of collector)
5.CMX Maximum limited collector temperature (collector cooling function)
6.CMN low temperature protection of collector
7.CFR frost protection of collector
8.SMX Maximum temperature of tank
9.REC Tank re-cooling function
10.Celsius and Fahrenheit temperature transferring
11.HND Manual mode
12.PASS Password setting
13.LOAD Recovery to factory setting
14.Manual heating
15.Temperature query function
16.Protection function
18.Anti-dry heating Protection
19.Screen protection

Specifications:
Rated Power:120W
Inlet/Outlet:3/4″
Max Flow:30L/min(8GPM)
Rated Head: 9m(25.9FT)
Volt/Freq:110-120V/60Hz

Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning,boilers, solar circulating water, hot water circulating warm and so on.

Advantages:
No leakage,low noise,environmental protection,aesthetics,ease of installation and so on.

Features:
High temperature resistance, antifraying,long life, full-automatic,maintenance-free, super silent,leak-tightness,high efficiency,low consumption,high flow and convenient installation advantages. Built-in high sensitive electronic sensors,the water will be flow when we open the switch.

Performance Datas:
1). Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
2).Performance: Liquid temperature range is 0℃ – 100℃(0-212℉)， Maximum working pressure is 10bar.
3).Ambient temperature: not higher than 40℃（104℉）.
4).Voltage:110-120V(±10%) ,Frequency: 60Hz.
5).Motor: Protection class IP44 Insulation class F.
6).Material: Cast iron, PP, ceramics.
7).Mounting position: Shaft horizontal mounting.
8).Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 160 mm.

Parameter:
Material: Copper
Diameter: 14mm (Header)
Pipe diameter: 8mm
Length: 400mm(including header)
Fit for the glass tube (500mm length)

Application:
insert into the glass tube of solar water heater for pressurized solar hot water heating system, as the heating transferring media.

Conclusion

By our suggestions above, we hope that you can found solar collector of solar hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!