Top 10 Recommended Powder Coating Oven Heater

Free US shipping for limited time only!

This is our second generation kit to DIY a control system for powder coating oven (approx. 4’x4’x6′ size). The circuit is designed for a 240 V dual output system with a total oven draw no more than 50 Amps. It not only has an additional timer readout, but also independent control for dual heater output. Wiring diagram and punching specification are available after purchase.

This kit includes each of the following:
12x10x8″ Wall mount enclosure with complete precut, and heat sink.
PID controller w/ connection to the timer.
Two 40 A Solid State Relay.
General purpose timer.
Flashing Buzzer for temperature/timer alarm.
Yellow LED for showing heater status.
Black selector switches for timer alarm silence.
Black selector switch for temperature alarm silence.
Two yellow illuminated selector switches for element control.
Blue illuminated selector switch for reseting timer.
Oven temperature probe w/ mounting screw (both sensor and cable are rated for 900 º F).
Two 1/2-inch EMT conduit fitting for element connection.
Strain Relief Power Cord Connector for hard-wiring input power.
Breaker Switch for main power control.
DIN Rail Terminal Block Kit for power distribution.
Engraved Panel Tags for labeling.

The kit does not include:
Heating element.
Input power cord.
Wiring and wiring fittings.

Note:
1. The enclosure only has two 1/16 DIN precut on the front panel.
2. If you need light & fan control, please check amzn.com/B073X1CCY1
3. The kit is designed for N.America 240V power line that requires 4-line power(L1, L2, Neutral and GND). For the customers in other countries, please contact us: https://goo.gl/fbnRDL

Warranty: 6 months.

All items sold on Amazon cannot be price-matched with auberins.com

Free US shipping for limited time only!

Assembled panel is also available: amzn.com/B07KCNLN22

This is our latest kit to DIY a control system for powder coating oven (approx. 4’x4’x6′ size). The circuit is designed for a 240 V oven with up to 12,000 watt heater load (for example, 4 x 3000 Watt heating elements) and 120V Fan/Light. It not only has an additional timer readout, but also independent control for dual heater output. Wiring diagram and punching specification are available after purchase.

This kit includes each of the following:
12x10x8″ Wall mount enclosure with silk screen label, complete precut and heat sink.
PID controller w/ connection to the timer.
Two 40 A Solid State Relay.
General purpose timer.
Flashing Buzzer and alarm indicator.
Yellow LED for showing heater status.
3-Position black selector switch for timer alarm silence.
3-Position black selector switch for temperature alarm silence.
Two yellow illuminated selector switches for element control.
Blue illuminated selector switch for reseting timer.
Green illuminated selector switch for light and fan control.
Oven temperature probe w/ mounting screw (both sensor and cable are rated for 900 º F).
1/2-inch EMT conduit fitting for all output connection.
Strain Relief Power Cord Connector for hard-wiring input power.
Breaker Switch for main power control.
DIN Rail Terminal Block Kit for power distribution.
The kit does not include:
Heating element.
Input power cord.
Wiring and wiring fittings.

Note:
1. This kit includes an enclosure with complete precuts.
2. The kit is designed for N.America 240V AC power line that requires four line power connections (L1, L2, Neutral and Ground). For the customers in other countries, please contact us: https://goo.gl/fbnRDL

Warranty: 6 months.

All items sold on Amazon cannot be price-matched with auberins.com

This is a 240V 50A turn-key control panel for powder coating oven. It allows you to run heating element up 12,000 watt. It includes both temperature control and timer counting features, so user can cure the parts in the oven at the set temperature over a certain amount of time. This will maximize the finishing quality and minimize your time, resources and effort spent on building a control box.

With the PID controller SYL-2352, the user can directly change the set temperature by using the up and down arrow keys. The timer JSL-74 has only a few parameters to set up; if door needs to be opened during a batch, one can uses pause or stop key pad to interrupt the timer. When the batch is finished, the coating process can be started again by pressing the reset button. When set temperature is reached, one can shut off one of the heaters to hold the temperature. The heater switches are connected to contactor coils. So once they are turned to OFF position, the heater outlet will be powered off completely by the contactor. Meanwhile, system performance is enhanced by SSR (Solid State Relay).

The sensor provided in this control panel is our TC-K3MM. It is suitable for low oven application and can handle up to 900 degree F. The probe is 4″ long and 1/8” (3.0 mm) diameter made of stainless steel with plated brass base.

Note:
The system is designed for North America 240V AC power line that requires four line power connections (L1, L2, Neutral and Ground).
Input power cord is not included.
Heating element is not included.
Warranty: One (1) year for parts and labor.
Lead time is about 2 business days.

For a KIT of components to DIY this panel, please check here: https://amzn.to/2I3n0et

Support line: 770-569-8420. 9-5 ET, M-F

All items sold on Amazon cannot be price-matched with auberins.com

This is a 240V 50A turnkey control panel for powder coating oven w/ light and fan control features. It allows you to run heating element up to 12,000 watt or up to estimate 128 cu.ft oven. It includes both temperature control and timer features, so user can cure the parts in the oven for a certain amount of time at the set temperature. This will maximize the finishing quality and minimize your time, resources and effort spent on building a control box.

With the PID controller SYL-2362, the user can directly change the set temperature by using the up & down keys. The timer JSL-74 has only a few parameters to set up; if door needs to be opened during a batch, one can uses pause or stop key pad to interrupt the timer. When the batch is finished, the coating process can be started again by pressing the reset button. When set temperature is reached, one can shut off one of the heaters to hold the temperature. The heater switches are connected to contactor coils. So once they are turned to OFF position, the heater outlet will be powered off completely by the contactor. Meanwhile, system performance is enhanced by SSR (Solid State Relay). When the heater switch is turned to ON position, the PID controller will provide power to the element via SSR which will take action in only 2 seconds.

The sensor provided can handle up to 900 degree F. The base of the probe is made of a 0.55″ (15 mm) long 5/16″-24 screw for easy mounting.

Note:
The system is designed for US 240VAC power line that requires four line power (L1, L2, Neutral and Ground).
Input power cord & heating element are not included.

Specifications
Heater Control Output: 30A, 240VAC max.
Light/Fan Control Output: 5A, 120VAC max.
Input Connection: 50A, four conductors.
Dimension:12 x 10 x 8″
Weight: 16 lb
Warranty: One (1) year for parts and labor

Customer support line: 770-569-8420. 9-5 ET, M-F

Specification
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V 50/60Hz
Operating voltage range： 85～110% Rated voltage
Power Consumption： Approx. 5VA（100～240VAC）
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC（＜1000ºC）；1ºC（≥1000ºC）
Period of Sampling： 0.5S
Temperature Compensation： 0-50ºC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g

Environmental Conditions: -10～55ºC（no icy or condensation）, RH 35-85% Humidity
Storage Temperature: -25～65ºC（no icy or condensation）
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals

K-Type Thermocouple Temperature Sensing For Temperature Controller

Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass

40A SSR SOLID STATE RELAY for temperature controller
Specifications:
Load Voltage: 24-380VAC
Load Current: 40A
Input Voltage: DC 3-32V

Pacakge:
1x Inkbird ITC-106VH Controller
1 x 40A SSR
1x Mounting bracket
1 x K sensor
1xBlack Heat Sink
1x Manual

Specification
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V 50/60Hz
Operating voltage range： 85～110% Rated voltage
Power Consumption： Approx. 5VA（100～240VAC）
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC（＜1000ºC）；1ºC（≥1000ºC）
Period of Sampling： 0.5S
Temperature Compensation： 0-50ºC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g

Environmental Conditions: -10～55ºC（no icy or condensation）, RH 35-85% Humidity
Storage Temperature: -25～65ºC（no icy or condensation）
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals

K-Type Thermocouple Temperature Sensing For Temperature Controller

Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass

25A SSR SOLID STATE RELAY for temperature controller
Specifications:
Load Voltage: 24-380VAC
Load Current: 25A
Input Voltage: DC 3-32V

Pacakge:
1x Inkbird ITC-106VH Controller
1 x 25A SSR
1x Mounting bracket
1 x K sensor
1x Manual

Make your next finishing project a success with this 160 piece high temp silicone plug and cap kit. This kit has an assortment of high temperature rated caps and plugs to fit almost anything between 1/16″ and 3/4″ in diameter. The tapered design of the stopper style plugs allows them to fit a variety of different hole sizes. The end caps are flexible which allows them to fit most common size studs, bolts, etc. Don’t worry about heat either – with a maximum temperature rating of 600°F for up to 20 minutes they are perfect for high temperature finishing applications. Say goodbye to chasing and tapping threads by masking them off properly before applying your coating. Made for the most demanding applications, this high grade silicone will not melt, harden or bleed under normal conditions and can be reused many times. No matter what your application – powder coating, painting, e-coating, sublimation, anodizing, plating, hydro dipping or media blasting, this kit is the best. The versatility of these caps and plugs makes them ideal for many uses not listed here, they are a great addition to almost any toolbox.

This is a bid for a dual display universal digital programmable temperature controller that supports many type of thermocouple sensor. It can be powered by 90-265V AC/DC, Comsumption5VA. DIN 1/16.

3 build-in Auto-Tuning Time proportion PID Algorithms to choose for different applications or environments to be controlled. (for variety of industries or home projects heating or cooling applications.)

Accuracy: 0.2%
Input: Thermo Resistor: PT100, Cu50
Thermocouple: J,S,K,E,Wre3 ~ Wre25
Dimension: DIN: 1/16 (48mmX48mmX80mm)
Weight: about 150g
Individually programmable PID control parameters
P, I, d, controlling period, digital filter coefficient, and more¡­ (for control theory experts only)
SSR control ready to connect external Solid State Relay to handle High current.
DIN 1/16, great form-factor to be included/build-in to your product.
Apply with step control,1 independent PID control for heating/cooling over temperature,pressure,level,flowm,etc..Widely used in auto system in line of light industry, chemistry, machine, metallurgy,ceramics,pertrification industry, or temperature control and adjust system of food & beverage; oven; furnance, plastic extruder heating process etc;
One key operation, Auto-tuning PID/ Fuzzy PID control.Easy operation,Reliable performance
Input: TC(K¡J¡S¡E)/ RTD£¨Pt100¡CU50£universal input, or 4-20mA/0-10V signal from standard pressure/level transmitter, (24V/30mA supply available for standard transmitter£
Control output: RELAY SSR SCR 4-20mA 0-10V (If 4-20mA output,you can choose PID control or analog output)
Alarm output: 2 lines output,7 kinds of alarm mode.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Powder Coating Oven Heater, eg:

• What are Top 10 Powder Coating Oven Heater for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Powder Coating Oven Heater to buy?
• What are Top Rated Powder Coating Oven Heater to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Powder Coating Oven Heater?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Powder Coating Oven Heater.
• Before deciding to buy any Powder Coating Oven Heater, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Powder Coating Oven Heater and What you should consider when buying the Powder Coating Oven Heater and Where to Buy or Purchase the Powder Coating Oven Heater. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Powder Coating Oven Heater of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Powder Coating Oven Heater.