dailyspect Finding your suitable readers for co2 tank for a kegerator is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for co2 tank for a kegerator including detail information and customer reviews. Let’s find out which is your favorite one.
993 reviews analysed
Kegco 5 lb. Aluminum Co2 Tank with Red Finish for Kegerator and Draft Beer Dispensing
5lb co2 Tank- New Aluminum Cylinder with CGA320 Valve
WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.
Aluminum Carbon Dioxide Cylinder with CGA 320 valve installed. Brushed aluminum body with plain dome (colors available), 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed, high strength aluminum alloy 6061-T6, 5.25 inch diameter, 14.2 inch length, 1.125″ UNF inlet thread.
All cylinders are manufactured in accordance with the U.S. Department of Transportation (DOT) 3AL and Transport Canada (TC) 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.
5lb Aluminum CO2 Tank Cylinder for Beer Kegerator or Brewing DOT CGA320 Valve
Brand new, with current (OCT 2018) DOT hydrostatic inspection dates engraved for easy filling at your local gas supplier.
Aluminum tanks are lighter than steel, and offer much better resistance to rust and corrosion!
- Aluminum cylinder with attractive brushed finish.
- Brass valve with durable aluminum handle
- CGA320 Co2 Valve (standard for USA Co2 tanks)
- DOT Certified
- Current Hydrostatic Test Stamp (good for 5 years)
- 1800psi Rated
- Sturdy metal hand wheel
- Tank is shipped empty, but ready to fill at your local gas supplier!
- 17.25″ Tall, 5″ Diameter
Luxfer CO2-5LB-LUXZebra DNA L6X Aluminum CO2 Tanks with CGA320 on/off Valve (5 LB, Brushed)
Luxfer L6X aluminum cylinder with their CGA320 valve pre-installed at the factory. Typically used for beverage applications.
Keg Regulator, Kegerator Regulator, Beer Regulator, Co2 Tank Regulator, Beer Keg Regulator, Co2 Regulator Gauge with CGA-320 Inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure By MRbrew
- ????【No Leaks】The co2 regulator wears two tank washers to prevent leakage of the connection between the tank and the c02 regulator
- The relief valve on the keg regulator also has a food grade silicone washer to prevent leakage of the relief valve.
- ????【Maintains Consistent Pressure】The lock ring can be quickly locked without re-adjustment, And maintains steady Co2 pressure with no leaks. Sturdy durable dual gauge beer regulator features a multi-stage body that gives you more precise control when making small adjustments to the output pressure.
- ????【Easy to Adjust & Read】The kegerator regulator is easily adjustable by hand, Making adjustment effortless even at freezing temperatures. Whether it’s a bar, camping or family gathering, this beer keg regulator is your best choice.
- ????【Relief Valve & Shut Off Valve】For added safety, The tap regulator has a manual pressure release valve that releases pressure at 55-65 PSI. There is also a shut off valve on the co2 pressure regulator that allows for instantly shutting off pressure to the keg without backing up your gas line and prevents backflow into the beer keg regulator.
- ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to help you solve the problem. This MRbrew CO2 Keg Regulator Enjoys 45 Days Money-back, 18-month Worry-free Warranty and Lifetime Technical Support.
MRbrew Double Gauge CO2 Keg Regulator, which has been specially designed to provide maximum convenience and durability in busy commercial environments
like bars, tasting rooms, and restaurants.
✮ The MRbrew regulator works with any Co2 Tank with a CGA-320 valve.
✮ Both gauges feature an easy to read design.
✮ The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi.
✮ The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-3000 display.
So you’ll never be caught off guard by an empty CO2 tank again.
✮ This brewery-grade regulator features a multi-stage body for more precise control when making small adjustments to the output pressure.
The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the keg
Allowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you’re dispensing. A large adjustment knob allows you to make
quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.
✅ The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection
washer (and spare) and self resetting safety release valve.
✅ 5/16″ barbed output for use with 5/16″ ID hose
✅ Integral safety pressure relief valve releases at 45 PSI
✅ Large hand control makes it easy to adjust the presure inside keg
✅ Inlet nipple has a permanent thick nylon seal that eliminates one source of leaks, so you will not need to use a new fiber washer every time the tank is changed
✮Regulators are all pressure tested to assure reliability in the field
✮What You Get: MRbrew Keg Regulator, Welcome Guide, Our Worry-free 45 Days Money-back 18-month Warranty and Friendly Customer Service.
Kegco Direct Draw Kit for Commercial Kegerators and Jockey Boxes with 5 lb. CO2 Tank
- Specially designed by Kegco to include everything you’ll need to pressurize and tap a D system keg
- Commercial grade Kegco KT85D-L keg coupler allows you to tap all North American store bought kegs
- Monitor output pressure and tank capacity using the commercial grade Kegco 762 double gauge CO2 regulator
- Once filled, the brand new 5 lb. aluminum CO2 tank can dispense 4-5 full size kegs
- Includes 5 feet of blue air line, two plastic snap clamps, and a neoprene washer to ensure leak-free connection
This direct draw kit includes everything you need to pressurize and tap a D system keg. It’s the perfect addition to a commercial kegerator that does not include the dispense components, and can be paired with a jumper line to connect to and serve from a jockey box. It includes a brand new 5 lb. aluminum CO2 tank with a glossy red, corrosion-resistant epoxy finish (empty), commercial grade double gauge regulator, US lever handle D system keg coupler, 5′ air line assembly (5 feet of 5/16″ blue air tubing and two plastic air line clamps), and neoprene washer.
Luxfer CO2 2.5 LB Aluminum Cylinder Tank CGA 320 Valve
(WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.) Brew at home with these premium aluminum CO2 cylinders.. Clean corrosion-resistant and lightweight. Highly corrosion-resistant interior and exterior ideal for wet gases such as CO2.. Tanks perform well at low temperatures.. Up to 40 percent lighter than comparable steel Tanks.. Consistent tare weight thick consistent walls resist damage.. Brushed external surface provides a low-maintenance finish.. Tanks cycle-tested in excess of 100 000 cycles at service pressure.. Minimum burst pressure tested to 2.5 times service pressure without failure.. Item Weight – 7.55 lbs.
CO2 Kegerator Regulator,Beer Keg Regulator,Dual Gauge CO2 Draft Beer Regulator,0-60 PSI Working Pressure,0-3000 PSI Tank Pressure,Beer Regulator with Safety Pressure Relief Valve
- 【PRESSURE YOU WANT】This brewery-grade keg regulator features a multi-stage body for more precise control when making little adjustment to the output pressure. And the lock ring under the adjustment knob can be quickly locked without re-adjustment, and maintains steady Co2 pressure.
- 【NO LEAKS & EASY INSTALLATION】Join our leading assembly technology, our co2 keg regulator ensure fast and stable transmission without leaking. All you need to install this beer keg regulator is an adjustable wrench. Always place a washer between the lock-down nut and the tank to ensure a tight seal.
- 【PROFESSIONAL GRADE】Easy-to-adjust large knob, easy-to-read dual-gauge with 45 PSI safety relief valve and gas shut-off valve, Our regulator for kegerator, which has been specially designed to provide maximum convenience and durability in busy commercial environments like bars, tasting rooms, and restaurants.
- 【HEAVY DUTY & DURABLE】CRBrewBeer CO2 Pressure Regulator for Draft Beer is a heavy duty unit, constructed of forged premium brass with all brass connections and components and features a sintered brass inlet filter, integrated nylon tank connection washer (and spare). Regular replacement of washers ensures long-term use.
- 【LIFELONG WARRANTY】Each CRBrewBeer keg regulator is backed by unbeatable quality, reliable customer service, and a trusted guarantee. this CO2 Keg Regulator Enjoys 45 Days Money-back, 18-month Worry-free Warranty and Lifetime Technical Support. Any question, please feel free to contact us by email directly.
The Double Gauge CO2 Regulator, which has been specially designed to provide maximum
convenience and durability in busy commercial environments like bars, tasting rooms, and
restaurants.
The Beer Keg Regulator can work with any Co2 Tank with a CGA-320 valve.
Both gauges feature an easy to read design.
The top gauge lets you know how much Co2
Pressure is in the keg and displays 0-60 psi.
The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-3000 display. So you’ll never be caught off guard by an empty CO2 tank again.
Cyl-Tec CO2 Aluminum Cylinder with CGA 320 Valve, 5 lb
- This new 5 lb CO2 tank is Great for kegs or home brewing! Other popular applications include hydroponics, aquariums, etc. Cyl-Tec is a cylinder supplier based in Aurora, IL. Be sure to visit our website at https://cyl-tec.com/
- SHIPPED EMPTY – Ships ready to fill (empty). Federal law requires that this tank ship without being filled. Once filled it can dispense 5-7 beer kegs.
- DOT/TC CERTIFIED – 1800 PSI service pressure. Certified for use in the U.S.(DOT) and Canada (T.C.). The tank is stamped with these markings.
- HIGH QUALITY – Sleek aluminum body. Made from high quality 6061-T6 brushed aluminum to ensure durability. Aluminum tanks are corrosion-resistant and will not rust as steel tanks do over time
- NEW VALVE – Includes NEW brass CGA 320 CO2 valve. 320 valves are approved by the Compressed Gas Association (CGA) and have a male thread for CO2 regulators. The black hand wheel is made of plastic as a safety feature. It will melt if the tank is exposed to extreme heat (i.e. a fire) and therefore show that that the tank is no longer safe to use
5 lb. Aluminum CO2 Cylinder with CGA 320 Valve
Conclusion
By our suggestions above, we hope that you can found Co2 Tank For A Kegerator for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Co2 Tank For A Kegerator, eg:
- What are Top 10 Co2 Tank For A Kegerator for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Co2 Tank For A Kegerator to buy?
- What are Top Rated Co2 Tank For A Kegerator to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Co2 Tank For A Kegerator?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Co2 Tank For A Kegerator.
- Before deciding to buy any Co2 Tank For A Kegerator, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Co2 Tank For A Kegerator and What you should consider when buying the Co2 Tank For A Kegerator and Where to Buy or Purchase the Co2 Tank For A Kegerator. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Co2 Tank For A Kegerator of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Co2 Tank For A Kegerator.
