dailyspect Nowadays, there are so many products of stainless steel push in fittings in the market and you are wondering to choose a best one.You have searched for stainless steel push in fittings in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings stainless steel push in fittings which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
533 reviews analysed
PneumaticPlus PN15 Series Push to Connect Tube Fitting, Male Elbow (1/4" Tube X 1/4" NPT) – Pack of 5
- PN series is high performing, extremely compact push-in full metal fitting
- To connect, simply push the Straight-cut tubing (Outer Diameter) in metal sleeve
- the stainless steel teeth grip onto the tubing and lock it
- Working Temp.: -4 ~ 160 Fahrenheit/ Max. Working Press: 261 PSI
- 1/4″ OD Tubing X 1/4″ NPT Male (Nominal Ourside Pipe Diameter OD: 0.54″)
- Recommended Tubing: Polyurethane, Nylon, Polyethylene / Application: Air Bag, Air Suspension, Pneumatic Tools, Air Compressor, and etc…
PN15 series are ready to use as all thread are Teflon Coated. Please use straight cut tubing before inserting into the fitting.
SMC KQG2 Series Stainless Steel 316 Push-to-Connect Tube Fitting, Bulkhead Union, 1/4" Tube OD x 1/2"-20 UNF
- Joins 1/4″ OD nylon, polyurethane, or polyolefin tubing through a bulkhead
- Push-to-connect mechanism provides reliable retaining force on tube
- 316 stainless steel for corrosion resistance in a wash down environment
- For use with vacuum up to -100 kPa and pressure up to 145 psi
- Operating temperature range of -5 to +150 degrees C
- This product is not intended for use in potable water systems
This SMC KQG2E07-00 bulkhead union tube fitting joins 1/4″ OD tubing through a bulkhead. Two 1/2″-20 Unified National Fine (UNF) thread lock nuts hold the fitting securely to the bulkhead. The 316 stainless steel fitting is corrosion-resistant, the fluoroelastomer (FKM) seal and O-ring are chemical-resistant, and the grease-free collet and chuck mechanism allows use with steam in a wash down environment. It is suitable for use with nylon, polyurethane, and polyolefin tubing at a maximum operating pressure of 145 pounds per square inch (psi), a maximum operating vacuum of -100 kilopascals (kPa), and an operating temperature range of -5 to +150 degrees C. This KQG2 series push-to-connect bulkhead union tube fitting is Restriction of Hazardous Substances (RoHS) compliant and is suitable for use with air, water, and steam in both vacuum and pressure applications, such as food processing in a wash down environment.
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) standards 9000:2000 and 9001:2008.
SharkBite U3086FLEX24LF Water Softener Connector, 1/2 inch x 3/4 inch FIP x 24 inch, Push-to-Connect COPPER, PEX, CPVC, Braided Stainless Steel
- INSTALLS IN SECONDS: Water softener hose line connections require no special tools, no soldering, or glue. Just push to create a watertight seal. Includes integrated ball valve supply shutoff
- COPPER, PEX, CPVC: SharkBite water heater line plumbing fittings fit Copper, PEX, CPVC and PE-RT. Use for both hot and cold water heater supply lines
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- RESIDENTIAL and COMMERCIAL: SharkBite water heater supply line connectors meet the same standards for commercial and residential plumbing applications. Inspector friendly for a peace of mind.
Product Description
SharkBite 24 Stainless Steel Braided Water Softener Hose The SharkBite water softener hose is an easy, convenient way to join your water supply lines to your water softener system. The hose has a 1 FIP swivel nut connector and a 3/4″ Push-to-Connect connection on the other side making installations quick, easy and painless. CUT. PUSH. DONE. The SharkBite water heater connection system makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a water heater pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue. Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
From the Manufacturer
These stainless steel braided connectors make fast work of water softener hook up. The ability to rotate the SharkBite connector after it is pushed onto the pipe and the flexibility of the braided hose allow connections in tight spaces and without additional fittings.
Beduan Push to Connect Fitting Elbow, 1/2" Tube OD x 1/2" NPT Male 90 Degree Elbow Adapter 304 Stainless Steel Air Union Fitting (Pack of 5)
- Type:Push in fitting/Push to connect /Size:1/2 ” Tube OD x 1/2″ NPT Thread
- Fluid Admitted:Air Vacuum Water (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:304 Stainless Steel /Body:304 Stainless Steel
- Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg
Beduan Pneumatic Fittings are a compact one piece push-to-connect fitting.
All items in the Beduan Pneumatic composite range are silicone free.
The 304 Stainless Steel gripping ring ensures excellent tube retention while the D seal
within the fitting provides a positive seal on the O.D. of the tube,
in both static and dynamic positions, due to an optimized design of the fitting cavity.
Beduan Pneumatic composite should not be used for live swivel applications
Body and collar are made of 304 Stainless Steel , gripping ring is 304 Stainless Steel , and D seal and O-rings are 304 Stainless Steel.
Beduan Push to Connect Fitting Elbow, 1/2" Tube OD 304 Stainless Steel 90 Degree Quick Connect Adapter Union Splicer Joiner Mender (Pack of 2)
- Type:Push in fitting/Push to connect /Size:1/2″ Elbow Connector
- Fluid Admitted:Air Vacuum Water (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:304 Stainless steel/Body:304 Stainless steel
- Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg
Beduan Pneumatic Fittings are a compact one piece push-to-connect fitting.
All items in the Beduan Pneumatic composite range are silicone free.
The Stainless steel gripping ring ensures excellent tube retention while the D seal
within the fitting provides a positive seal on the O.D. of the tube,
in both static and dynamic positions, due to an optimized design of the fitting cavity.
Beduan Pneumatic composite should not be used for live swivel applications
Body and collar are made of 304 Stainless steel, gripping ring is plastic, and D seal and O-rings are Nitrile.
CEKER Tube Fitting 1/2 Elbow 90 Degree Pneumatic Push to Connect Fitting 304 Stainless Steel 1/2" Tube OD Union Air Compressor Fitting Double Ferrule Coupler 1Pack
- Type:Tube Fitting 1/2 Elbow 90 Degree Pneumatic Push to Connect Fitting , Body : Elbow 90 Degree
- Air Compression Fitting Adapter for connecting pipes or fittings of different types.
- Made of chemically hardened type 304 stainless steel,The fitting provides higher strength and greater corrosion resistance than untreated stainless steel.
- Double ferrule fitting reduces possibility of leakage
- 90-degree elbow for connecting tubing to threaded pipe at an angle
Tube OD : 1/2″ ; Body: 304 Stainless Steel
Adapter for connecting pipes or fittings of different types.
Made of chemically hardened type 304 stainless steel,The fitting provides higher strength
and greater corrosion resistance than untreated stainless steel.
Double ferrule fitting reduces possibility of leakage
90-degree elbow for connecting tubing to threaded pipe at an angle
1/4 OD Tube Fitting, CEKER Cross Air Fittings Coupling 4 Way Push Connect Pneumatic Fittings 304 Stainless Steel Air Line Hose Fitting Air Compressor Accessories with Ferrules 1Pack
- 1/4 Air Fitting Applicable medium: oil, water, gas and other non-corrosive or corrosive medium
- Fitting connects to tubing on three ends
- Air Line Fitting Operating temperatures: below 450℃/ Working pressure: 25Mpa-40Mpa
- Type 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
- Cross with four openings for connecting and branching 4 pipes
- Pipe Applicable: PU/PA/FEP/PFA
- All joints can be re-installed, but to ensure that the parts are not damaged and clean
- These quick push connectors work great ,available in various styles and models ,good to suit your pneumatic piping needs perfectly, easy to connect and disconnect, a quick fix to your leaking problems.
1/4 Air Fitting Applicable medium: oil, water, gas and other non-corrosive or corrosive medium;Fitting connects to tubing on three ends
Air Line Fitting Operating temperatures: below 450℃/ Working pressure: 25Mpa-40Mpa
Type 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
Cross with four openings for connecting and branching 4 pipes; Pipe Applicable: PU/PA/FEP/PFA; All joints can be re-installed, but to ensure that the parts are not damaged and clean
These quick push connectors work great ,available in various styles and models ,good to suit your pneumatic piping needs perfectly, easy to connect and disconnect, a quick fix to your leaking problems.
SMC KQG2 Series Stainless Steel 316 Push-to-Connect Tube Fitting, 90 Degree Elbow, 6mm Tube OD x M5x0.8 Male
- Joins M5 male thread to 6 mm OD nylon, polyurethane, or polyolefin tubing at a 90-degree angle
- Push-to-connect mechanism provides reliable retaining force on tube
- 316 stainless steel for corrosion resistance in a wash down environment
- For use with vacuum up to -100 kPa and pressure up to 145 psi
- Operating temperature range of -5 to +150 degrees C
- This product is not intended for use in potable water systems
This SMC KQG2L06-M5 elbow tube fitting adapts M5 metric male thread to a push-to-connect fitting for 6 mm OD tubing at a 90-degree angle. The M5x0.8 metric thread fitting has a rubber-coated stainless steel gasket to ensure an air- and water-tight seal. The 316 stainless steel fitting is corrosion-resistant, the fluoroelastomer (FKM) seal and O-ring are chemical-resistant, and the grease-free collet and chuck mechanism allows use with steam in a wash down environment. It is suitable for use with nylon, polyurethane, and polyolefin tubing at a maximum operating pressure of 145 pounds per square inch (psi), a maximum operating vacuum of -100 kilopascals (kPa), and an operating temperature range of -5 to +150 degrees C. This KQG2 series push-to-connect elbow tube fitting is Restriction of Hazardous Substances (RoHS) compliant and is suitable for use with air, water, and steam in both vacuum and pressure applications, such as food processing in a wash down environment.
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) standards 9000:2000 and 9001:2008.
CEKER 304 Stainless Steel Air Fittings Type T Tube Fitting, 1/4" Tube OD 3 Way Union Tee Air Compression Fittings, 1/4" x 1/4" x 1/4" OD Quick Connect Air Line Fitting with Ferrules 1 Pack
- 3 way air fitting Applicable medium: oil, water, gas and other non-corrosive or corrosive medium
- Fitting connects to tubing on three ends
- Quick push to connect fittings tee work great ,available in various styles and models ,good to suit your pneumatic piping needs perfectly, easy to connect and disconnect, a quick fix to your leaking problems.
- Type 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
- ferrule fitting reduces possibility of leakage
- Tee with three openings for connecting and branching three pipes
- Pipe Applicable: PU/PA/FEP/PFA
- All joints can be re-installed, but to ensure that the parts are not damaged and clean
Applicable medium: oil, water, gas and other non-corrosive or corrosive medium;Fitting connects to tubing on three ends
Operating temperatures: below 450℃/ Working pressure: 25Mpa-40Mpa
Type 304 stainless steel for higher strength and greater corrosion resistance,good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
Tee with three openings for connecting and branching three pipes; Pipe Applicable: PU/PA/FEP/PFA; All joints can be re-installed, but to ensure that the parts are not damaged and clean
These quick push connectors work great ,available in various styles and models ,good to suit your pneumatic piping needs perfectly, easy to connect and disconnect, a quick fix to your leaking problems.
Conclusion
By our suggestions above, we hope that you can found Stainless Steel Push In Fittings for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Stainless Steel Push In Fittings, eg:
- What are Top 10 Stainless Steel Push In Fittings for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Stainless Steel Push In Fittings to buy?
- What are Top Rated Stainless Steel Push In Fittings to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Stainless Steel Push In Fittings?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Stainless Steel Push In Fittings.
- Before deciding to buy any Stainless Steel Push In Fittings, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Stainless Steel Push In Fittings and What you should consider when buying the Stainless Steel Push In Fittings and Where to Buy or Purchase the Stainless Steel Push In Fittings. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Stainless Steel Push In Fittings of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Stainless Steel Push In Fittings.
