Best Heating Element Tester

This is a dryer heating element replacement for Whirlpool, Kenmore, Sears, Maytag, KitchenAid, Magic Chef, Amana, Admiral, Norge, Estate, Inglis, Roper, and Crosley. If your dryer does not heat first, check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases, the heating element will have a break in the element if defective. Rated 240 volts and 5400 watts. It replaces 279838 PS334313 AP3094254 3398064 3403585 8565582 AH334313 EA334313, EED4400WQ0. Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

The AstroAI AM33D Multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It’s easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing, which is both for automotive and household uses. Use this multimeter for: household outlets, fuses, wiring, general-purpose batteries, vehicle battery and charging system, automotive circuits and more.

Note:
1. When the Meter is working at an effective voltage over 60V in DC or 30V rms in AC, special care should be taken because there is a danger of electric shock.

2. Before using the Meter, inspect the exterior casing. Do not use the Meter if it is damaged or if all or part of the exterior casing is removed. Look for cracks or missing plastic. Pay special attention to the insulation around the connectors.

3. If you have mistakenly connected the red test lead to the 500mA selection, then used this meter to test larger current(like 10A) or higher voltage, it might probably burn out the wires even the meter.

4. If you are the beginner, you should have known some basic physical concecpts and basic methods of using a meter, you also should have read the user manual carefully and known the consequences of misuse because any misuses will probably cause serious results.

5. This multimeter can not be used to test EMF.

Specifications
Max.display: 1999, 3 1/2 digits
Range selection: Manual ranging
Overload display: “1” is displayed
Sampling Speed: 2 times per second
Low Battery Indication
Power: 1 x 9V 6F22 Battery Included
Diode Test: Yes
Continuity Test: Yes
Square Wave Output: Yes
Dimensions: 5.1″ x 2.8″ x 1.4″
Safety/Compliances: IEC61010 CAT.I 600V, CAT.II 300V, double insulation
DC Voltage: 200mV/2000mV/20V/200V ±(0.5%+3), 500V (1%+5)
AC Voltage: 200V/500V ±(2%+10)
DC Current: 2000μA/20mA ±(1.8%+2), 200mA ±(2%+2), 10A ±(2%+10)
Resistance: 200Ω ±(1%+10), 2000Ω/20KΩ/200KΩ ±(1%+4), 20MΩ ±(1%+10), 200MΩ ±[5%(reading-10)+10]

Package Includes
1 x AstroAI AM33D Digital Multimeter
1 x 9V 6F22 Battery
2 x Test Leads
1 x User Manual

Features : High heat transfer cartridge tube, 2 wires, corrosion resistant stainless steel heater.
It is widely used in heating metal mold, moulds and dies, hot mould core box,vacuum equipments, bolt heating element, high-temperature equipments, hot stamping, etc.
This high Quality single head electric heat pipe used for both ends of the wiring in not heating medium. 

Description:
This connector is widely used in thermocouple and RTD circuits, best solution for quick and good contact.
Designed with good insulation, metal pins construct ensures good contact.

Features: 1.5meters length
Widely used in aviation, metallurgy, petroleum, household, electric appliances, lighting equipments , electronics, instruments, motor, industrial equipment etc.

Conclusion

By our suggestions above, we hope that you can found heating element tester for you.Please don’t forget to share your experience by comment in this post. Thank you!