dailyspect 
Nowadays, there are so many products of anet a8 print cooling fan in the market and you are wondering to choose a best one. You have searched for anet a8 print cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings anet a8 print cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Anet Brushless DC Cooling Fan for 3D Printer Hot End, 2 Packs 40mm x 40mm x 10mm 4010 12V 2 Pin 3D Printer Fans Black
Features:
Cooling fan for 3D printer hot ends, extruder & so on.
6000r/min rated speed, with low noise.
Rated power: DC 12V
2Pin connector, wire length approx. 100cm / 39.4in.
Size 40 * 40 * 10mm.
Specifications:
Cable Length: Approx. 100cm / 39.4in
Size: 40 * 40 * 10mm / 1.6 * 1.6 * 0.4in
Speed: 6000r/min
Rated Power: DC 12V 1.4W
Connector: 2Pin
Noise: 20dBA
Package List:
2* Cooling Fan
SoundOriginal 2pcs Cooling Blower Fan DC 12V 0.06A~0.15A 50mmx15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement
- Cooling Blower Fan 12vdc 0.06A~0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation and so on—Repair Replacement (2Pack)
- Bearing: Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5100 RPM
- Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H)
- Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″
- Mounting Spacing : 5.8cm/2.3″
- Weight : 26g
- This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
- Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5100 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sale price $11.49 Sleeve Bearing
- Sale price $14.99 Dual Ball Bearing.
4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)
- ✹✹ Power Connection: 2 Pin-ph2.5
- Low noise while cooling the hot end of heatsinks.
- ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
- ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
- ✹✹ Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A.
- ✹✹ Note: New & Old Version is shipped randomly.(Any questions, you can contact us and we will give you a satisfied solution!).
Similar items with 4 stars and above
FYSETC Prusa i3 MK3 Cooling Fan 5015 50x50x15mm 5V DC 0.35A Ｈotend Cooler Blow Radiator Sleeve Bearing for 3D Printer Parts Accessories, 2Pcs
- Brushless DC Blower Fan, best DIY replacement extruder hotend parts for Prusa i3 MK3.
- Size: About 50x50x15mm/ 1.9×1.9×0.59 inch
- Cable Length: about 750mm/ 29.5 inch
- Rated Voltage: 5V, 0.35A
- Please Note: the fan has two sides,but the side with sticker must be always facing the hotend (not visible when the fan is mounted).Otherwise,the cooling won’t work properly.
- After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you.
FYSETC is a professional supplier of 3D Printers related accessories products. Include Popular Printer CR-10, Ender 3, Prusa i3, Makerbot, Anet A8, Duplicator i3, Tevo Tarantula, Maker Select V2 etc. It has a professional R&D team and high quality after-sales service to ensure that you can purchase at a reliable price. If you need more, please feel free to email or QA us, we and our engineers are very happy to assist you.
Package includes:
2 x 5015 fan cooling
WINSINN 50mm Blower Fan 12V 5015 50x15mm Turbine Turbo Brushless Cooling for DIY 3D Printer Extruder Hotend MK2 MK3 MK7 MK8 (Pack of 4Pcs)
- ✔️Oil bearings 5015 Blower Fan – High Speed version
- ✔️️Oil bearings, use time no more than 16 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.
- ✔️️Rated voltage: DC 12V
- ✔️️Size: 50x50x15mm
- ✔️️Made by WINSINN
►Oil bearings 5015 Blower Fan – High Speed version
►Oil bearings, use time no more than 16 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.
►Size: 50x50x15mm
►Rated voltage: DC 12V
►Line length: about 1.18in / 30mm
—————————————————————————————————————
Package include:
►4 x High Speed 5015 12V Blower Fan
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
Similar items with 4 stars and above
SoundOriginal 12VDC Brushless Blower Cooling Fan 50x50x15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (x1 12V)
- Cooling Blower Fans
- DC 12V 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation and so on—Repair Replacement (1Pack)
- Bearing: Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5500 RPM
- Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H)
- Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″
- Mounting Spacing : 5.8cm/2.3″
- Weight : 26g
- This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
- Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5500 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sleeve Bearing
Similar items with 4 stars and above
KKmoon Anet 40 40 10mm DC 12V Brushless Cooling Cooler Fan 2 Wire for RepRap i3 DIY 3D Printer
Features:
Cooling fan for 3D printer hot ends, extruder & so on.
6000r/min rated speed, with low noise.
Rated power: DC 12V 0.12A.
2Pin connector, wire length approx. 100cm / 39.4in.
Size 40 * 40 * 10mm.
Specifications:
Speed: 6000r/min
Rated Power: DC 12V 0.12A 1.4W
Connector: 2Pin
Noise: 20dBA
Cable Length: Approx. 100cm / 39.4in
Size: 40 * 40 * 10mm / 1.6 * 1.6 * 0.4in
Package Size: 9 * 5 * 2cm / 3.6 * 2 * 0.8in
Package Weight: 19g / 0.7oz
Package List:
1 * Cooling Fan
3D Printer Cooling Fan Extruder Blower Fan DC 12V 40×10 50×15 Fans (1M) Eewolf
- Package include: 1pc 50*50*15 fan and 1pc 40*40*10 fan (NOTE: LOGOS MAY BE DIFFERENT WITH THE PICTURES.)
- Each fan has 2 cables. If there is no terminal on the main board, you can cut the connectors off.
- Great cooler for hot ends, extruder, prints & other parts on 3D printer.
- 12V 3D printer cooling fan
- High rotation speed with low noise. 1m in length.
3D Printer Cooling Fan Extruder Blower Fan DC 12V 40×10 50×15 Fans 1M Eewolf
Each fan has 2 cables. If there is no terminal on the main board, you can cut the connectors off.
Package include: 1pc 50*50*15 fan and 1pc 40*40*10 fan
4010 fan: 12V 0.09A 5015 fan: 12V 0.16A
Wire length: 1M
NOTE: LOGOS MAY BE DIFFERENT WITH THE PICTURES.
4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
Similar items with 4 stars and above
Anet Auto Leveling A6 3D Printer with Filament 1.75mm, High Precision Self Assembly Reprap i3 DIY 3D Printer Kits with 2004 LCD Display Screen 220 x 220mm Hot Bed – Black
- 1. Double Z motors: the printer with double Z motors can ensure the structure is balanced and more stable. can get a high printing speed and higher printing precision.
- 2. Double cooling fans: Work with two cooling fans. cooling product quickly and makes the product more perfect.
- 3. High quality stepper motor: The motor is upgraded from single head to double head, the transmission is more stable and more synchronous.
- 4. Aluminum heatbed: Excellent smooth, stability, durability. 220 x 220mm heatedbed could print a large size product.
- 5. Wide application: High quality, high-precision molding. Integrated industrial design concepts, support educational and medical industry, scientific research, architectural design, food industry, accessory, prototype children toys and etc.
Features:
1. HD LED display: Insert SD card on sides, offline print.
2. High-precision brass nozzles: accurate printing higher precision molding to 0.01mm greatly reduce stair-stepping effect.
3. Acrylic plate fuselage: Laser percision cutting, good insulation and the frame structure is stable.
4. Precision T screw: Precision stainless steel wire rod print stability motion accuracy.
Specifications:
Brand: Anet
Plug: US
Screen: LCD 2004 display screen
Frame Material: Acrylic and Lead Screw
Hotbed Material: Aluminum Alloy
Language operation: English
Nozzle Quantity: 1
Printing Color: Single
Filament Diameter: 1.75mm
Printable Material: ABS/PLA/TPU/Wood/Nylon/PVA/PP etc.
Gift: Filaments+Hotbed +SD card +Tools
Voltage: 110-220V
Current: 20A
Power: 240W
Printer Size: 22 * 22 * 25cm / 8.7*8.7*9.8in
Item Size: 48 * 40 * 40cm / 18.9 * 15.7 * 15.7in
Item Weight: 8.5Kg / 18.7Lbs
Package Size: 51 * 49 * 18cm / 20.5 * 19.7 * 7.1in
Package Weight: 9.6Kg / 21.2Lbs
Software Requirement:
Operating System: Windows XP / Win7/ Win8/ MAC
Printing Software: Cura
File Type: STL、OBJ、JPG
Offline: Yes
Technological Parameter:
Printer Speed: 40-120mm/s
Nozzle Diameter: 0.4mm
Layer Thickness: 0.1-0.4mm
Printing Accuracy: ±0.1-0.2mm
XY Axis Accuracy: 0.012mm
Z Axis Accuracy: 0.004mm
Nozzle Temperature: Max. 260°C
Package List:
1 * DIY 3D Printer
1 * Card Reader
1 * SD Card (Installation Instruction Included)
1 * Nipper
1 * Open Spanner
1 * Screwdriver
4 * Hex Wrench
1 * 10m Filament
Conclusion
By our suggestions above, we hope that you can found anet a8 print cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
