The 7 Best Custom Water Cooling Tool Kit

Thermaltake Water 3.0 Riing RGB 360 Edition PWM AIO Tt LCS Certified Liquid Cooling System 3 Year Warranty CL-W108-PL12SW-A

Take your CPU to new heights with the Thermaltake Water 3.0 Riing RGB 360 Edition AIO Enthusiast Liquid Cooling System. From stock to overclock, the Water 3.0 Riing RGB Series fits the needs for CPU cooling performance with minimal maintenance for an all-in-one solution. With a high performance copper base plate, Patented Riing RGB LED Fans, universal socket compatibility and 360mm large surface radiator, gain up to 3X in cooling performance over stock CPU coolers. Experience extreme cooling performance and low noise to protect your most vital component from heat with the Water 3.0 Riing RGB Edition from Thermaltake.

Key Features:

• Patented PWM Riing 12 RGB LED Fans
• 360mm Aluminum Radiator
• Sleeved Tube with Copper Cold Plate
• Maintenance Free Operation
• 3 Year Warranty

Compatibility:
Intel LGA 2011-3/2011/1366/1156/1155/1151/1150
AMD FM2/FM1/AM3+/AM3/AM2+/AM2

Water Block:
Material Copper

Pump:
Rated Voltage: 12 V
Rated Current: 175 mA

Fan:
Dimension:120 x 120 x 25 mm
Speed:800 ~ 1500 R.P.M
400 ~ 1000 R.P.M (Low Noise Mode)
Noise Level:18.5 ~ 26.4 dB-A
Rated Voltage:12 V
Max. Air Flow:22.14 ~ 40.6 CFM
Max. Pressure:0.57 ~ 2.01 mm-H2O
Connector:4 pin

Radiator:
Dimension:326 x 120 x 27 mm

Tube:
Length:326 mm
Material:Rubber
Weight 1320g

The EK-KIT P360 is the ultimate liquid cooling kit dedicated to all users who seek the easiest way to start with their first custom loop at the best price-performance ratio on the market! Everything you need to assemble your first custom loop with carefully chosen components that will last you a long time!This water cooling kit is compatible with the following CPU sockets: Intel LGA-1150/1151/1155/1156, Intel LGA-2011(-3), Intel LGA-2066, AMD Socket AM4.

Model: 3831109863473

Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB (Rigid Finishing Bit) is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. The RFB can be used at mid to low RPM to smooth out the end of your tube with no effort. Crank up the RPMs and you can customize the length of the tube as well. This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. Custom fitting your rigid tube is now so much easier!
Specifications:
Tube Compatibility: 1/2in. ID x 5/8 in. OD
Material Compatibility:PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)

The Alphacool Eiskoffer is perhaps the most comprehensive collection of tools for bending 13mm or 16mm diameter HardTubes into nearly any form ever assembled. Inside the large, elegant, and sturdy case, each tool has its own separate place. All the tools are clearly arranged and neatly organised. The rubberised gloves ensure you always have a good grip on things, while also protecting you from splinters and dirt. The deburring tool is perfect for smoothing down HardTubes. Deburring is mandatory if you want the HardTubes to fit into their connectors properly. A long, sturdy saw and a mitre box serve to simplify cutting the HardTubes. The mitre box can be fastened to a table edge with special screw clamps, which are included. The inside of the mitre box is rubberised to prevent scratches and to keep the HardTubes from sliding around. The comprehensive set of measuring tools makes it easy to measure not just length, but also two or more angles at the same time. This tremendously simplifies the planning and execution of complicated bending sequences. In order to get the perfect bend each time, a substantial palette of bending radii and angles can be attached to the bending plate. The basis for this is formed by two different sizes of bending mandrels and arc mandrels. This allows you to bend HardTubes to any classic bending radius. The fitting stoppers can be used to simulate the depth of an Alphacool fitting on the end of the tube. This means an exact measurement and a perfect bend are always guaranteed when using Alphacool products. Alternatively, the straight mandrel with a stylus stopper can be used if you are using other products. The bending plate has a section that can accommodate self-designed or highly specialised bends. The case contains special flex mandrels that can be positioned in nearly any way. Model: 29131.

Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB (Rigid Finishing Bit) is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. The RFB can be used at mid to low RPM to smooth out the end of your tube with no effort. Crank up the RPMs and you can customize the length of the tube as well. This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. Custom fitting your rigid tube is now so much easier!
Specifications:
Tube Compatibility: 12mm x 16mm rigid tubing
Material Compatibility:PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)

Conclusion

By our suggestions above, we hope that you can found custom water cooling tool kit for you.Please don’t forget to share your experience by comment in this post. Thank you!