dailyspect 
Nowadays, there are so many products of esc water cooling in the market and you are wondering to choose a best one. You have searched for esc water cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings esc water cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Caredy Watercooled ESC, Waterproof Programming 80A Brushless ESC Water Cooling Electric Speed Controller with 5V/5A UBEC for RC Boat Model
- Designed for RC boat, giving fastest response of the motor
- Water cooling system can dissipate heat and reduce noise for your model
- Waterproof design ensures the safety of component and extends its service life. (Need to use 704 silicone rubber by yourself)
- It comes with a limited range of programming functions and are designed to be plug-n-play
- It consists of high quality components to get strong current endurance
Specification:
Material: PBC
Color: Black
Size: Approx. 9 * 3.8 * 1.6cm / 3.5 * 1.5 * 0.6inch
Weight: 82g
Cont Current: 80A
Burst Current: 95A
BEC Model: Switch
BEC Output: 5V, 5A
Recommend Battery: Li-ion/Lipoly 2-7S;Ni-Mh/Ni-Cd 6-20NiMh (Not Included)
Cooling: Watercooled
Type: RC Part
Package Includes:
1 x ESC
1 x Manual
Note:
Enter programming Mode:
1. Connect your motor and receiver to the ESC, but do not connect the battery yet.
2. Turn on your transmitter and move the throttle stick to the full. Please note: for futaba most transmitter have the throttle channel reversed by default.
3. Connect you battery and controller, which will initialize with a musical tone.
Phrases 2 programming:
After 3 seconds, the controller will start beeping a sequence of tones followed by one or more beeps. Each sequence represents a parameter that you can program and it repeats 3 times.
The parameters are:
Music tone + 1 beep: cell type and No. of cells;
Music tone + 2 beep: throttle setting;
Music tone + 3 beep: brake setting/throttletype (for Heli);
Music tone + 4 beep: direction and Cutoff Type;
Music tone + 5 beep: timing mode;
User programming options:
Cell Type: NiMH/NiCD/Lipoly/Li-ion
Cell Quantity: 2S-7S/6-20NIMH
Throttle Setting: Auto/Soft/Hard
Brake: No Brake/Soft/Medium/Hard
Direction: Clockwise/Counter Clockwise
Cut off: Soft/Hard
Timing: 1o/7o/15o/30o
PWM: 8Khz/16khz
Watercooled ESC, Waterproof Brushless ESC 60A Water Cooling Electronic Speed Controller with 5V/3A UBEC for RC Boat Models Part
- Designed for RC boat, giving fastest response of the motor
- Water cooling system can dissipate heat and reduce noise for your model
- Waterproof design ensures the safety of component and extends its service life. (Need to use 704 silicone rubber by yourself)
- It comes with a limited range of programming functions and are designed to be plug-n-play
- It consists of high quality components to get strong current endurance
Specification:
Material: PBC
Color: Black
Size: Approx. 7 * 3.8 * 1.6cm / 2.8 * 1.5 * 0.6inch
Cont Current: 60A
Burst Current: 70A
BEC Model: Switch
BEC Output: 5V, 3A
Recommend Battery: Li-ion/Lipoly 2-4S; Ni-Mh/Ni-Cd 6-18NiMh (Not Included)
Cooling: Watercooled
Weight: 54g
Type: RC Part
Package Includes:
1 x ESC
1 x Manual
Note:
Enter programming Mode:
1. Connect your motor and receiver to the ESC, but do not connect the battery yet.
2. Turn on your transmitter and move the throttle stick to the full. Please note: for futaba most transmitter have the throttle channel reversed by default.
3. Connect you battery and controller, which will initialize with a musical tone.
Phrases 2 programming:
After 3 seconds, the controller will start beeping a sequence of tones followed by one or more beeps. Each sequence represents a parameter that you can program and it repeats 3 times.
The parameters are:
Music tone + 1 beep: cell type and No. of cells;
Music tone + 2 beep: throttle setting;
Music tone + 3 beep: brake setting/throttletype (for Heli);
Music tone + 4 beep: direction and Cutoff Type;
Music tone + 5 beep: timing mode;
User programming options:
Cell Type: NiMH/NiCD/Lipoly/Li-ion
Cell Quantity: 2S-4S/6-18NIMH
Throttle Setting: Auto/Soft/Hard
Brake: No Brake/Soft/Medium/Hard
Direction: Clockwise/Counter Clockwise
Cut off: Soft/Hard
Timing: 1o/7o/15o/30o
PWM: 8Khz/16khz
Electric Speed Controller, 60A Brushless ESC Water Cooling Electric Speed Controller with 5V/3A UBEC for RC Boat Model
- ✔ Designed for RC boat, giving fastest response of the motor
- ✔ It consists of high quality components to get strong current endurance
- ✔ Water cooling system can dissipate heat and reduce noise for your model
- ✔ It comes with a limited range of programming functions and are designed to be plug-n-play
- ✔ Waterproof design ensures the safety of component and extends its service life. (Need to use 704 silicone rubber by yourself)
Specification:
Material: PBC
Color: Black
Size: Approx. 7 * 3.8 * 1.6cm / 2.8 * 1.5 * 0.6inch
Cont Current: 60A
Burst Current: 70A
BEC Model: Switch
BEC Output: 5V, 3A
Recommend Battery: Li-ion/Lipoly 2-4S; Ni-Mh/Ni-Cd 6-18NiMh (Not Included)
Cooling: Watercooled
Weight: 54g
Type: RC Part
Package Includes:
1 x ESC
1 x Manual
Note:
Enter programming Mode:
1. Connect your motor and receiver to the ESC, but do not connect the battery yet.
2. Turn on your transmitter and move the throttle stick to the full. Please note: for futaba most transmitter have the throttle channel reversed by default.
3. Connect you battery and controller, which will initialize with a musical tone.
Phrases 2 programming:
After 3 seconds, the controller will start beeping a sequence of tones followed by one or more beeps. Each sequence represents a parameter that you can program and it repeats 3 times.
The parameters are:
Music tone + 1 beep: cell type and No. of cells;
Music tone + 2 beep: throttle setting;
Music tone + 3 beep: brake setting/throttletype (for Heli);
Music tone + 4 beep: direction and Cutoff Type;
Music tone + 5 beep: timing mode;
User programming options:
Cell Type: NiMH/NiCD/Lipoly/Li-ion
Cell Quantity: 2S-4S/6-18NIMH
Throttle Setting: Auto/Soft/Hard
Brake: No Brake/Soft/Medium/Hard
Direction: Clockwise/Counter Clockwise
Cut off: Soft/Hard
Timing: 1o/7o/15o/30o
PWM: 8Khz/16khz
Fashionlook Waterproof 3660 3500Kv Motor with Water Cooling Jacket & 90A Brushless Esc Programming Card for Rc Boat Rc Accessories
- ☀1.4 Pole 12 slot hi-torque motor design.
- ☀2.CNC machined 6061 T6 billet aluminum heatsink can.
- ☀3.High purity copper windings maximizes efficiency.
- ☀4.High RPM ABEC5 oversized bearings.
- ☀5.Precision balanced rotor, smoothness for best reliability and maximum RPM.
Features:
1.4 Pole 12 slot hi-torque motor design.
2.CNC machined 6061 T6 billet aluminum heatsink can.
3.High purity copper windings maximizes efficiency.
4.High RPM ABEC5 oversized bearings.
5.Precision balanced rotor, smoothness for best reliability and maximum RPM.
6.Stator-super thin (0.2mm) laminations.
7.Removable/replaceable rotor.
8.Precision engineered for maximum energy conversion.
Descriptions:
1.The 3660 4 poles sensorless brushless motor is designed to provide both quality and performance.
2.It is built from high quality aluminum alloy which is produced from the latest CNC milling machines, and is designed with high power and rotation speed to provide longer run time for 600-800mm RC boat.
Specifications:
Type: RC Model Part & Acces
Motor:
Motor: 3660
KV(RPM/Volt): 3500KV
Motor diameter: 36mm
Motor length: 60mm
Motor shaft diameter: 5mm
Motor shaft length: 18mm
Motor front cover fixing screw hole center distance: M3 screw 25mm three pairs
Motor outlet length: 8cm with 4mm banana head
Motor maximum power: 1700w
Peak current: 3500kv is 106 A, 2100kv is 70A
The maximum voltage: 3500kv is 16v, 2100kv is 26v
ESC:
Item Name: 70A Brushless ESC with 5.5V/3A BEC
Cont. Current: 70A
Burst Current: 90A (10s)
Voltage: 5-18 NC/2-6 LiPo
Program: Yes
BEC: 5.5V/3A
Item Size: Approx. 80x50x23mm/3.15×1.97×0.91inch
Water Cooling Jacket:
Item Name: 36-S Water Cooling Jacket
Material: Aluminum
Color: Black
Outlet Fitting Diameter: Approx. 4.5mm/0.18inch
Jacket Inner Diameter: Approx. 36mm/1.40inch
Outer Diameter: Approx. 44mm/1.72inch
Jacket Length: 47mm/1.83inch
Package Informations:
Package Size: 188x110x70mm/7.33×4.29×2.73in
Package Weight: 420g/14.7oz
General Box Package
Package Included:
1 x Motor
1 x Water Cooling Jacket
1 x 70A Brushless ESC with 5.5V/3A BEC
2 x Water Cooling Tube
2 x Rubber Rings
Pasamer,RC Boat Pump,3-6V 370 Water Cooling Pump JR Plug Accessory Part for RC Boats Motor & ESC
- It is waterproof, and it also works well in water
- JR plug is suitable for pluging in receiver
- Under the condition of 5V voltage, the water pump still works normally without interruption after 15 hours operation. It’s hot but it’s in the normal range, which has no impact on future operation
- Low noise design provides you with perfect playing experience
- Suitable for remote control boat whose motor or ESC needs water cooling
Description:
The 370 pump is suitable for remote control aircraft carrier/warship/battleship whose motor or ESC needs water cooling. The pumping voltage is 3-6V and can be connected to receiver directly. You need to use the step-down module to step down to 5V for the use of pumps if its power supply isn’t receiver and the battery you use is more than 2S battery(2S, 3S, 4S, 5S, 6S) & voltage is between 7-28V.
Features:
1.It is waterproof, and it also works well in water.
2.JR plug is suitable for pluging in receiver.
3.Under the condition of 5V voltage, the water pump still works normally without interruption after 15 hours operation. It’s hot but it’s in the normal range, which has no impact on future operation.
4.Low noise design provides you with perfect playing experience.
5.Suitable for remote control boat whose motor or ESC needs water cooling.
Specification:
Material: Metal
Color: Shown As Pictures
Pump Length: Approx. 73mm / 2.9inch
Weight: 68g
Type: RC Pump
Rated Voltage: 6V
Opetation Voltage: 3 – 6V
@3V Volume Flows of Air: 1.1L/min
@3V Flows of Water: 300ml/min
@6V Volume Flows of Air: 1.8L/min
@6V Flows of Water: 600ml/min
Package Includes:
1 x RC Water Cooling Pump
Motor ESC Combo, 2958 3380KV Sensorless Waterproof Brushless Motor 5.5V/3A BEC w/ 29S Water Cooling Jacket & 70A Brushless ESC for RC Boat
- It can can be programmed. Water cooling tube and jacket with inlet and outlet fittings. This built-in 5.5V/3A BEC of ESC provides power for the receiver.
- Waterproof design extends ESC service life. If there is water in the ESC, please dry the water at the connectors.
- Multiple protection: low-voltage cut-off / over-heat protection / throttle signal loss protection / power reduction protection. 12-slots high-torque motor design.
- O-ring seals for leak mitigation. CNC machined 6061 T6 aluminum heatsink can behave good heat dispersion. High purity copper windings maximizes efficiency.
- Precision and balanced rotor for best reliability and maximum RPM Black anodized finish for durability, corrosion resistance, and great looks.
Specification:
Color: Shown As Pictures
Weight: 356g
Type: RC Model Part & Acces
Motor Specification:
Model: 2958
Item Name: Brushless Motor
Material: Metal + Magnet
KV(RPM/Volt): 3380KV
RPM: 60000
Watt: 1400W
No Load Current: 1.9A
Max Voltage: 18V
Diameter: Approx. 29mm / 1.14inch
Length: Approx. 58mm / 2.28inch
Shaft Diameter: Approx. 3.175mm / 0.13inch
Fit: for 600-800mm RC Boat
Connector: 4mm Golden Banana Connector
ESC Specification:
Brand: ROCKET
Item Name: 70A Brushless ESC with 5.5V/3A BEC
Cont. Current: 70A
Burst Current: 90A (10s)
Voltage: 5-18 NC / 2-6 LiPo
Program: Yes
BEC: 5.5V/3A
Item Size: Approx. 80 * 50 * 23mm / 3.15 * 1.97 * 0.91inch
Water Cooling Jacket Specifications:
Item Name: 29-S Water Cooling Jacket
Material: Aluminum
Color: Black
Designed for: 2958 2948 RC Boat Brushless Motor
Outlet Fitting Diameter: Approx. 4.5mm / 0.18inch
Jacket Inner Diameter: Approx. 29mm / 1.14inch
Outer Diameter: Approx. 37mm / 1.46inch
Jacket Length: 47mm / 1.85inch
Package List:
1 * Motor
1 * Water Cooling Jacket
1 * 70A Brushless ESC with 5.5V/3A BEC
2 * Water Cooling Tube
VXP Racing Water Cooling Plate for ESC 30 x 23mm Orange Electric RC Boat
Used for ESC water cooling.
Description: – Weight : 11.6g
– Material: aluminum alloy
– Size:30mm length * width is 23 mm * 6.2 mm thickness
novahobby CNC Aluminum Small Water Cooling Plate for brushless Speed Control esc RC Boat
Package Contents:
1 PC water cooling plate
Ktyssp 60A Brushless Water Cooling Electric Speed Controller ESC 5V/3A BEC for RC Boat
- ❤The high quality and the cheapest price,you can not find the other one❤
- handheld phone holder set mobile bracket gimbal stand for dji osmo pocket adapter plate expansion board module 6pcs explosion-proof tpu screen protector film full coverage guard camera lock lens cover hood caps tripod head mount 1/4 screw selfie stick tello drone waterproof portable bag body/battery handbag carrying case type-c usb extension extender data sync cable adaptor spark remote control strorage travel box 2pairs led flash propellers blades props rechargeable lightweight mounts stabilize
- hardshell storage mavic series plastic propeller release tool u-wrench blade removal wrench landing pad helipad foldable pro rc quadcopter universal smartphone replacement type to usb-a 3.0 fast professional mrc filters flexible star base accessories 1/2 wrist lanyard strap motor repair parts authentic brushless bicycle clamp gimble cam multi-function inch desk dock table spare 2pair quick-release 360° rotary bike handlebar :Environmental friendly material nontoxic odour free anti broken stable
- Foldable Low Noise Propeller Accessories drone propeller guards Mini guard part balancer Folding Propellers Screw Prop Quick release phantom 4 propellers low noise dji for dji mavic pro propellers for dji mavic pro platinum phantom 3 propellers red carbon guards led dji low noise master airscrew carbon fiber phantom 4 propellers low noise dji yellow dji mavic pro fly more kit for propeller guards bag tello drone battery controller case accessories with boost combo charger platinum batteries
- Helicopter Toy Remote Controls Remote Quadcopter Rc helicopter RC for aircraft Airplane Mini Cars led lights REMOTE CONTROL TOYS Metal Toys Games Gyro Camera Gifts Photography Blade Drone RC Quadcopters Battery Ufo radio control Parts Fashion Control axis Toys Hobbies Men’s Fashion Game Repair Tool 4ch Servo RC Drone RC toy Hobby Boat Case Headphones s5 case case Case 5 case LED Flash RC toys wheel thumb pad lanyard lightning low noise
☛☛☛ ❤Welcome to my store ,there are a lot of products with the high quality ,and the price is cheap, always have your favorite❤ ☚ ☚ ☚
Features:
These series of water cooling ESC designed for RC boat. They are not only offer excellent performance they are also built with the highest quality components to ensure true-to-rating current handling and high efficiency operation.
Water cooling,Waterproof design(Need to use 704 silicone rubber by yourself).
This super simple boat series comes with a limited range of programming functions and are designed to be plug-n-play.
A perfect ESC for those looking for something simple to use and economic.
Phrases 1 Enter programming Mode:1.Connect your motor and receiver to the speed controller, but do not connect the battery yet.2.turn on your transmitter and move the throttle stick to the full throttle position (full up).please note: most futaba transmitter have the throttle channel reversed by default.3.Connect you battery and controller will initialize with a musical tone.
Phrases 2 programming:After 3 seconds, the controller will start beeping a sequence of tones a musical tone followed by one or more beeps. Each sequence represents a parameter that you can program and is repeats 3 times.
The parameters are:
Music tone + 1 beep: Optionas 1. Cell type and No. of Cells;
Music tone + 2 beep: Optionas 1. Throttle setting;
Music tone + 3 beep: Optionas 1. Brake setting/Throttletype(for Heli);
Music tone + 4 beep: Optionas 1. Direction and Cutoff Type;
Music tone + 5 beep: Optionas 1. Timing mode;
Specifications:
Cont current: 60A
Burst current: 70A
BEC model: Linear
BEC output: 5V/3A
Recommend battery: Li-ion/Lipoly 2-4S;Ni-MH/Ni-Cd 6-18NIMH
Cooling: Water cooled
ESC weight: 52g
ESC size: 73mm x 36mm x 15mm
Package Includes:
1 x Brushless Water Cooling Electric Speed Controller ESC
Conclusion
By our suggestions above, we hope that you can found esc water cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
