dailyspect 
Nowadays, there are so many products of fuel filter water separator kit for isx 15 cummins in the market and you are wondering to choose a best one. You have searched for fuel filter water separator kit for isx 15 cummins in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings fuel filter water separator kit for isx 15 cummins which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
28,516 Reviews Scanned
Replacement Marine Fuel Filter Water Separator Kit with Aluminum Head – 3/8 Inch NPT Port – Replaces 35-60494-1, S3213, 18-7932-1, 18-17928, 35-809097 – Clear Re-usable bowl with Fittings
- REPLACEMENT FUEL FILTER WATER SEPARATOR KIT – screens out dirt, rust and other particles from the fuel before entering the system of the vehicle. Undesired substances that are not filtered may cause rapid wear of the fuel pump, injectors and worse cause them to fail. These filters needs to be changed regularly to maintain desirable performance and efficient fuel economy.
- PERFECT FOR VARIOUS APPLICATIONS – This fuel filter water separator kit is perfect for a variety of universal fuel applications. Mostly used on outboard marine engines, the aluminum filter head is capable of filtering from 2 sources, 2 fittings to block or close an inlet or outlet is also included if intended for filtering from a single source only.
- REPLACES PART# 35-60494-1, S3213, B32013, 18-7932-1, 18-7932, 18-7928-1, 18-7928, 35-809097, Yamaha MAR-24563-03-00, 18-7919, 18-7919-1, 35604941, B32013, 1879321, 187932 , 1879281, 187928, 35809097, MAR245630300, 187919, 1879191. The fuel filter included has a 10 micron rating which means it has over 90% efficiency of filtering out particles as small as 10 microns for maximum engine protection over unwanted particles aside from fuel.
- OEM FIT, QUALITY, FINISH – While this is not a genuine Quicksilver, Sierra, Mercury Marine, Mercruiser, GLM, Mallory, Moeller fuel filter kit, it is a direct replacement manufactured by AA Ignition. This fuel filter water separator kit features a lot of benefits including an outlet at the bottom to drain water without dismantling the assembly and a clear bowl lets you see the quality of fuel being used.
- 2 YEAR WARRANTY – This fuel filter water separator kit comes complete with a 2 year warranty. If the part ever fails on your Bravo Mag, OMC, Stringer, Sterndrive boat, MPI, EFI, MX V8 V6 engine within the warranty period simply contact us for a replacement. Save time and money by purchasing this part and taking advantage of our warranty.
The fuel filter water separator screens out dirt, rust and other particles from the fuel before entering the system of the vehicle. Undesired substances that are not filtered may cause rapid wear of the fuel pump, injectors and worse cause them to fail.
Suitable for various applications including marine outboard setups
Benefits of having this set up:
- Largel fuel filtering capacity than standard fuel filters
- Larger water capacity than standard fuel filters
- Clear bowl lets you know when it’s time to drain the water
- Visibility of fuel quality being used
- Flexibility of inlet and outlet configurations
Replaces part numbers: 35-60494-1, S3213, B32013, 18-7932-1, 18-7932, 18-7928-1, 18-7928, 35-809097, Yamaha MAR-24563-03-00, 18-7919, 18-7919-1, 35604941, B32013, 1879321, 187932 , 1879281, 187928, 35809097, MAR245630300, 187919, 1879191.
This is a compatible replacement part manufactured by AA Ignition. This Fuel Filter Kit is NOT a genuine Quicksilver, Sierra, Mercury Marine, Mercruiser part. Mercury, Mercruiser, Sterndrive and their associated models and part numbers are used in this listing only to identify the models this Fuel Filter Kit fits.
Diesel Fuel Filter Set Water Separator – Fits Ram 2500, 3500, 4500, 5500 6.7L Cummins Engine Years 2013, 2014, 2015, 2016, 2017, 2018 – Replaces 68157291AA, 68197867AA, FS43255, 68065608AA, FS53000
- REPLACEMENT FUEL FILTER WATER SEPARATOR KIT – screens out dirt, rust and other particles from the fuel before entering the system of the vehicle. Undesired substances that are not filtered may cause rapid wear of the fuel pump, injectors and worse cause them to fail. These filters needs to be changed regularly to maintain desirable performance and efficient fuel economy.
- FITS THE FOLLOWING VEHICLES WITH 6.7L CUMMINS ENGINE – 2013 – 2018 Ram 2500 | 2013 – 2018 Ram 3500 | 2013 – 2018 Ram 4500 | 2013 – 2018 Ram 5500 |. The fuel filters can be easily be located underneath the vehicle and also on the driver side of the engine close to the firewall just a little under the coolant reservoir tank. This fuel filter kit also includes all the o-rings needed for a proper installation.
- REPLACES PART# 68157291AA, 68197867AA, FS43255, 68065608AA, FS53000. The Ram truck features a section on the instrument cluster where it gives a percentage of how soon you need to change the fuel filters. Do not forget to reset it after changing the fuel filters. Before installation make sure to depressurize and drain the fuel in the filters and pressurize it by just turning on the vehicle for some good minutes before starting the engine after replacement.
- OEM FIT, QUALITY, FINISH – While this is not a genuine Mopar, Cummins Filtration or Ram part, it is a direct replacement manufactured by AA Ignition and will fit, work, and look exactly like the factory Fuel Filters on your Dodge Ram or Ram 2500, 3500, 4500 and 5500 including year models 13, 14, 15, 16, 17, 18.
- 2 YEAR OR 24,000 MILE WARRANTY – This fuel filter set comes complete with a 2 Year or 24,000 Mile warranty whichever comes first. If the part ever fails on your Ram truck earlier than our warranty simply contact us for a replacement. Save time and money by purchasing this part, replacing them yourself and taking advantage of our 2 Year or 24,000 Mile Warranty.
Moeller 033320-10 10 Micron Water Separating Filter Kit
- 10 Micron Water Separating Filter Kit
- Designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications
- Includes a powder coated reusable filter head, filter, barbs and plugs
- Not recommended for use with electric fuel pumps
The Moeller 033320-10 10 Micron Water Separating Filter Kit is designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications. Includes a powder coated reusable filter head, filter, barbs and plugs. Not recommended for use with electric fuel pumps.
Aluminum Marine Fuel Water Separating Filter 3/8 Inch NPT Port for Outboard Motor Mercury 35-60494-1 Reusable Bowl Anti Corrosion 10 Micron Filter(Include Four Fittings)
- Material:The filter is made of aluminum.Anti-oxidation/corrosion.Long service life.
- Features:10 micron filters are over 90% efficiency at removing particles as small as 10 microns.10 micron filters are recommended to protect sensitive inboard,sterndrive and outboard fuel injection systems.
- Usage:Designed to trap the smallest particles and emulsified water from diesel.
- Function:It contributes to clear contaminates protect fuel system.Well sealed.Perfect water fuel separating performance.
- Water separating canister:High performance 3/8 NPT ports offer lower pressure drop rates.
Replaces Mercury 35-60494-1.
Replaces Racor S3213, B32013,18-7932-1,18-7932,18-7928-1,18-7928.
Filter Replaces Mercury Marine 35-809097,Racor S3213,Yamaha MAR-24563-03-00,18-7919,18-7919-1.
To replace element:
1.Drain the unit by loosen the drain screw.
2.Loosen and remove the filter element.
3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.
4.Wipe O-ring gland clean,and coat bowl’s seal O-ring with fresh oil or grease and place it back to the gland.Then tighten the bowl onto filter element firmly by tool.
5.Coat filter element’s seal O-ring with fresh oil or grease and attach filter element onto filter head,and the tighten securely by tool.
6.Run engine and check for fuel leakage.
Attention:
1.Make sure you remove both the filter and the filter bowl from the mounting housing and put a light film of fuel on the o-ring.As delivered it will leak without the lubrication to allow for the proper crush.
2.For diesel transfer tank to filter the fuel before it enters the main tank.Only thing is you have to make sure to get the proper sealant for the threads. For The First time installation,in order to avoid any leaking at the threads.You’d better get some thread paste since the tape might plug the injectors if it were to come loosen.
3.Check and replace regularly.
Instructions:
To Drain Water:
1.Loosen drain screw to drain bowl of water.
2.Tighten drain screw.
3.Run engine and check for fuel leakage.
Safety Warning:
Periodically check fittings and filter element for leaks.Be careful when changed fuel filter element.Diesel is extremely flammable and highly explosive under certain conditions.Avoid spilling diesel.Always stop engine and do not smoke or allow open flames in the area while changing filter element.
Similar items with 4 stars and above
iFJF R12T Fuel Filter/Water Separator 120AT NPT ZG1/4-19 Automotive Parts Complete Combo Filter fit Diesel Engine(Include Four Fittings)
- For R12T Marine Fuel Filter/Water Separator complete assembly.NPT,ZG1/4-19.(Include four fittings)
- The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance.
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel.
- Don’t be caught in the water without one of these diesel spin-on filters.
If you have difficulty in installing, you can go to YouTube to find the appropriate installation video:https://www.youtube.com/watch?v=LyeqTDVzY-A.
Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
Product details:
1.Don’t be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3.The inlet and out let can be feed in on the same side or in one side out the other side.
4.Check and replace regularly.
R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
Dodge Ram 6.7 Liter Diesel Fuel Filter Water Separator Set Mopar OEM
Available for 2013-2016 Dodge Ram 3500 With Diesel Engine
Available for 2013-2016 Dodge Ram 2500 With Diesel Engine
Ebely R12T Fuel Fittings Marine Spin-on Fuel Filter Water Separator 120AT NPT ZG1/4-19 Fit Gasoline Engine and Diesel Engine
- Fitment：Gasoline Engine and Diesel Engine
- This R12T fuel filter water separator is equipped with a self-draining drain to remove unnecessary dirt and water, the filter design is easy to replace, and the reusable transparent nylon collection bowl
- This is a separator for diesel and water, and a separator for gasoline and water.
- The flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean
- The filter unit coated with a durable coating of electrostatic powder coating, having excellent corrosion resistance
Item specifics:
PRODUCT TYPE : Filter Fuel/water Separator
-This listing is for one (1) unit. This is a new For Racor R12T Marine Fuel Filter / Water Separator complete assembly.
Product Type Filter Fuel/Water Separator
Description Replacement Fuel Filter/Water Separator
-Maximum Flow Rate 15 GPH (57 LPH)
-Filter Rating 10 Micron
-Port/Connecting Size M18 X 1.5 Center Thread
-Additional Detail Used In Model 120A Filter Assembly
Dont’ be caught in the water without one of these diesel spin-on filters. filters are designed for high performance applications, and with flow rate of 15 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. These filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance. The unit features Racor’s famous Aquabloc II technology. This spin-on filter design is simple to replace and the reusable clear plastic collection bowl and features a self-venting drain for removing unwanted muck and water.
Sierra 18-7982-1 Fuel Water Separator Kit
- Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline
- Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 micron
- All filters flow at 90 GPH to feed even the hungriest motor
- Prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems
Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline. Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 microns. All filters flow @ 90 GPH to feed even the hungriest motor. Sierra 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.
6.7L Cummins Fuel Filter Water Separator Set | for 2013-2018 Dodge Ram 2500 3500 4500 5500 6.7L Cummins Turbo Diesel Engines | Replaces# 68197867AA, 68157291AA
- REPLACEMENT FILTER: Keeping a clean fuel filter in your car can reduce damage done to your engine and other fuel delivery components. This fuel filter can capture 98 percent of water contaminants, ensuring a steady flow of clean, dry diesel fuel for optimal engine performance
- PREMIUM QUALITY: Outstanding filtration matters, that is why our fuel water separator are crafted from high-grade filter medium that provide maximum filtration and minimal flow restriction. Deliver increased flow and efficiency that are demanded in the diesel environment
- LONG LIFE-SPAN: The cummins filter has went through rigorously testing so that you will get a fairly reliable fuel filter, features anticaustic housing, multi-layer filter and superior sealing components to ensure leakage resistance and extreme durability under various operating conditions
- FITMENTS: With 6.7L DIESEL ENGINES | 2013 2014 2015 2016 2017 2018 Dodge Ram 2500 3500 4500, 2015-2018 Dodge Ram 5500. Please check the fitment in the product description below
- REPLACE OE#: 68157291AA, 68065608AA, MO608, MO867, DF401-AD, DF410-AD, DF99085, WF10112, WF10255NP, FF1199, FF1279, BF46031, PF9870, FS53000, GF401EX, CS11037
The fuel filter is responsible for keeping the smaller contaminants in the system out of the engine and other fuel delivery components. On carburetor engines these contaminants can cause clogging of orifices or jets and cause the vehicle to get too much or not enough fuel.
When your car loses power going up an incline, you might need to take a look at your fuel filter. Keeping a clean fuel filter in your car can reduce damage done to your fuel pump and keep debris out of your fuel line, so be sure to regularly change this important piece of your vehicle’s equipment.
Part Information:
This fuel filter water separator kit includes front engine filter & rear frame mounted filter.
Fits the Following Vehicles:
2013-2018 Dodge Ram 2500 With 6.7 Litre Cummins Diesel Engines
2013-2018 Dodge Ram 3500 With 6.7 Litre Cummins Diesel Engines
2013-2018 Dodge Ram 4500 With 6.7 Litre Cummins Diesel Engines
2015-2018 Dodge Ram 5500 With 6.7 Litre Cummins Diesel Engines
Replaces Part Numbers:
Auto Defender Part DF410-AD Mopar 68197867AA MO867 Premium Guard DF99085 Wix WF10112 Hastings FF1279 Baldwin BF46031 Fleetguard FS53000 PTC GF410
Auto Defender Part DF401-AD Mopar 68157291AA Premium Guard Wix WF10255NP Hastings FF1199 Baldwin PF9870 Fleetguard FS53000 PTC GF401EX Fram CS11037
At ATRACYPART, we take pride in the quality of our products and in your satisfaction. If you have any problems, do not hesitate to contact us.
SEEU AGAIN R12T Fuel Filter Water Separator 120AT NPT ZG1/4-19 with Fitting Full Filter Replace For Car Racor R12T 10 Micron Marine Diesel Engine 3/8 Inch NPT Outboard Motor Durable Spin-on Housing
- ▶ Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
- ▶ Maximum Flow Rate 30 GPH (57 LPH).
- ▶ Port / Connecting Size M18 X 1.5 Center Thread.
- ▶ Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns.
- ▶ This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
Notification:
1.Don¡¯t be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, Engine will perform better than ever with clean, water-free Fuel.
3.The inlet & outlet can be feed in on the same side or in one side out the other side.
R12T Water separator & filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports.
If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
Maximum Flow Rate 30 GPH (57 LPH)
Filter Rating 10 Micron
Port / Connecting Size M18 X 1.5 Center Thread
Conclusion
By our suggestions above, we hope that you can found fuel filter water separator kit for isx 15 cummins for you.Please don’t forget to share your experience by comment in this post. Thank you!
