dailyspect 
Nowadays, there are so many products of gtx 1070 liquid cooling in the market and you are wondering to choose a best one. You have searched for gtx 1070 liquid cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings gtx 1070 liquid cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
NZXT Kraken G12 – GPU Mounting Kit for Kraken X Series AIO – Enhanced GPU Cooling – AMD and NVIDIA GPU Compatibility – Active Cooling for VRM, Black
- Enhance your GPU cooling: With a 40 % increase in cooling capacity compared to stock cooling, you’ll maximize your gpu clock speeds for higher performance and better frame rates
- Comprehensive compatibility: Supports both reference and nonreference design amd and nvidia gpus, for more than 30 liquid coolers, including aftermarket vrm heatsinks
- Active cooling for VRM: Comes with a 92 millimeter fan, providing active cooling for the VRM and memory on the graphics card
- Easy installation: Designed for a fast and easy installation, you can now lay the graphic card flat as you install the kraken G12
- Supports: kraken x42/x52/x62/72 liquid coolers
Quickly mount any Kraken Series liquid cooler onto graphics cards with the Kraken G12 mounting kit. It delivers a 40% increase in cooling capacity over stock cooling, and features a newly designed bracket with an easier installation process versus the Kraken G10. Plus, the G12 is compatible with more than 30 liquid coolers on the market.
Compatibility – Graphic Cards
Nvidia
Titan X, Titan, Geforce GTX 1080 Ti, 1080, 1070, 1060, 980 Ti, 980, 970, 960, 780 Ti, 780, 770, 760, 680, 670, 660Ti, 660, 580, 570
\AMD
RX 480, 470, R9 390X*, 390*, 380X*, 380, 290X*, 290*, 285*, 280X*, 280*, 270X, 270, R7 370, HD7970*, 7950*, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 6770, 5870, 5850, 5830
* Some variations in AMD die height may require the use of a copper shim which is not included.
Compatibility – AIO Liquid Coolers
NZXT
Kraken X72, X62, X52, X42, X61, X41, X31, X60, X40
Corsair
H105, H110, H90, H75, H55, H50 (CW-906006-WW only)
Thermaltake
Water 3.0 Riing RGB 360, 280, 240, Red 280, 140,
Water 3.0 Ultimate, Extreme S, Extreme, Pro, Performer
Water 2.0 Extreme, Pro, Performer
Antec
KUHLER H2O 920V4, 620V4, 920, 620
Zalman
LQ-320, LQ-315, LQ-310
Similar items with 4 stars and above
XSPC Razor Radeon Pro Duo Backplate
Backplate for reference design AMD Radeon Duo Pro cards. Technical Details – Dimensions: 266.7 x 100.04 x 4mm – Material: Aluminium. Box Contents: 6x 1mm thermal pad, 17x M3 * 10mm screws, 17x M3 red washers, 1x Allen key. Please note: This backplate requires an XSPC Razor waterblock for installation and cannot be installed with the original heatsink.
Model: 5060175587060
Frostflow Cooling Fan 120VGA GeForce GTX 4pin GPU Radiator Water Cooler
- The cold head is designed with multi-platform fastener and supports 58.4×58.4mm and 53.3×53.3mm.
- GeForce GTX Series graphics cards with two main hole spacing designs (recommended for GTX960/980/980Ti/1050/1060/1070/1070Ti, AMD R390/290/280 series or other graphics cards of corresponding level), please make sure that your graphics cards support the disassembly of the original radiator before purchase.
- The right side of the cold head is equipped with an air-cooled auxiliary heat dissipation unit and attached with pasted heat dissipation particles, which can ensure that the display and power supply sections are fully cooled.
- Powerful water pump with ceramic bearing is equipped with pure copper cold head of micro-channel, which can take away GPU heat more quickly.
- The encrypted 120 aluminium thin row is selected for both heat dissipation efficiency and good compatibility.
Specifications:
Fan specifications:
Fan speed: 700-1500RPM
Air volume: 62CFM
Noise: 18.0-26.4dB (A)
Connector: 4Pin (2510)
Start-up voltage: DC 7V
Rated voltage: DC 12V
Rated current: 0.18A
Rated power: 2.16W
Size: 120X120X25mm/4.72X4.72X0.98″
Pump specifications:
Pump speed: 2000 RPM
Pump head: 1.2m H2O
Cold liquid flow rate: 96L/H
Noise: 25.0dB (A)
Connector: SATA
Rated voltage: DC 12V
Rated current: 0.25A
Rated power: 3W
Cold Head Size: 65×32.5mm/2.56×1.28″
Cold Plate size: 154x120x27mm/6.06×4.72×1.06″
Pipe length: 315mm/12.4″
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow slight measuring deviation due to manual measurement.
Package included:
1 X GPU Cooling Fan
1 X Installation Kit
1 X User Manual
EKWB EK-FC GeForce GTX FE RGB GPU Waterblock, Nickel
EK-FC GeForce GTX FE RGB is a high-performance full-cover water block for multiple NVIDIA GeForce GTX and Titan Pascal series graphics cards that comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeForce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. You can easily remove the LED strip cover which is mounted with two screws to replace the LED strip with some other type LED strip. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure.See EKWB site for full video card compatibility list.
Model: 3830046995780
EKWB EK-FC GeForce GTX FE GPU Waterblock, Nickel
- High Performance Copper Base
- G1/4″ Threads
- Top: CNC Machined Acrylic
- Base: Mirror Finish Nickel-plated Copper
- Compatible with all reference design GeForce GTX 1060, GeForce GTX 1070, GeForce GTX 1080, GeForce GTX 1080 Ti, GeForce Titan X Pascal and GeForce Titan Xp based graphics cards
EK-FC GeForce GTX FE is a high-performance full-cover water block for multiple NVIDIA GeForc GTX and Titan X (Pascal) based graphics cards. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeFroce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LEDs. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The EK-FC GeForce GTX FE water block is backward compatible with all EK-FC1080 GTX Backplates, EK-FC1080 GTX Ti Backplates, and EK-FC Titan X Pascal Backplates. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC GeForce GTX FE water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. The EK-FC GeForce GTX FE water block is compatible with all reference design GeForce GTX 1060, GeForce GTX 1070, GeForce GTX 1080, GeForce GTX 1080 Ti, GeForce Titan X Pascal and GeForce Titan Xp based graphics cards.
Model: 3831109831977
NZXT Kraken G12 – GPU Mounting Kit for Kraken X Series AIO – Enhanced GPU Cooling – AMD and NVIDIA GPU Compatibility – Active Cooling for VRM – Black
- ENHANCE YOUR GPU COOLING: With a 40% increase in cooling capacity compared to stock cooling, you’ll maximize your GPU clock speeds for higher performance and better frame rates
- COMPREHENSIVE COMPATIBILITY: Supports both reference and non-reference design AMD and NVIDIA GPUs, for more than 30 liquid coolers, including aftermarket VRM heatsinks
- ACTIVE COOLING FOR VRM: Comes with a 92mm fan, providing active cooling for the VRM and memory on the graphics card
- EASY INSTALLATION: Designed for a fast and easy installation, you can now lay the graphic card flat as you install the Kraken G12
- SUPPORTS: Kraken X42/X52/X62/72 Liquid Coolers
Quickly mount any Kraken X Series liquid cooler onto graphics cards with the Kraken G12 mounting kit. It delivers a 40% increase in cooling capacity over stock cooling, and features a newly designed bracket with an easier installation process versus the Kraken G10. Plus, the G12 is compatible with more than 30 liquid coolers on the market.
CORSAIR Hydro Series H60 AIO Liquid CPU Cooler, 120mm Radiator, 120mm SP Series PWM Fan
- Precise PWM Control: Dynamically adjust fan speed between 600 RPM to 1,700 RPM with a 120mm CORSAIR SP Series PWM fan, making it easy to minimize noise or maximize airflow
- 120mm High Density Radiator: Experience lower CPU temperatures with a 120mm high density slim radiator for maximum cooling surface area and performance
- LED Illuminated Pump Head: White LED lit pump head adds a touch of brilliance to any system build. Fan Airflow 57.2 CFM. Noise Level 28.3 dBA
- Efficient Cold Plate and Pump: Thermally optimized cold plate and low noise pump design for more efficient, quieter cooling
- Radiator Material: Aluminum
- Easy to Install: Modular tool free mounting bracket for quick and easy installation onto all current AM4, LGA 1151 and LGA 2066 socket CPUs
- NOTE: Refer user manual before use
The Hydro Series H60 is an all in one liquid CPU cooler with a 120mm radiator built for low noise liquid CPU cooling and bold styling with a white LED lit pump head. Compatible with all current AM4, LGA 1151 and LGA 2066 socket CPUs and equipped with a CORSAIR 120mm SP Series PWM fan, users can adjust the fan speed between 600 RPM to 1,700 RPM for precise control over noise and airflow. A high density 120mm slim radiator provides greater surface area for superb heat dissipation, while a thermally optimized copper cold plate and low noise pump ensure heat is quietly and efficiently channeled away from your CPU. With tool free easy installation and CORSAIR engineered cooling, the H60 is everything you need to keep your CPU running fast, cool and quiet.
Similar items with 4 stars and above
ARCTIC Accelero Xtreme IV – High-End Graphics Card Cooler with Backside Cooler for Efficient RAM and VRM-Cooling
- 300 Watt Cooling Performance – Three silent 92 mm PWM Fans, 84 Aluminum fins, 5 Heat pipes pre applied MX 4 Thermal Compound
- New Fan Controller – For a smooth operation with both NVIDIA and AMD graphics cards
- Nvidia GeForce: GTX 980, 970, Titan X, Titan (Black), 780 (Ti), 770, 760, 750 (Ti), 680, 670, 660 (Ti), 650 (Ti,Ti boost), … For More Information, Visit http://ax4.arctic.ac
- Including Back Side Cooler for improved VR- and RAM- Cooling
- AMD Radeon: R9 290(X), 285, 280(X), 270(X), R7 265, HD 8870, 7870(XT, GHz), 7850, 6970, 6950, 6870, 6850, 6790, 5870, 5850, 5830
About ARCTIC
ARCTIC is a leading manufacturer of silent PC coolers and components and has initiated and sustainably influenced the trend towards quiet cooling systems. Besides a wide range of CPU and GPU coolers, ARCTIC offers high quality monitor mounts as well as an audio product line. The company, run by founder Magnus Huber, has locations in Germany, Hong Kong and the USA and convinces pc enthusiasts in over 45 countries with innovative and user-friendly products, high quality and fair prices. For more than 15 years ARCTIC stands for comfortable computing, excellent service and personal support. About ARCTIC
ARCTIC is a leading manufacturer of silent PC coolers and components and has initiated and sustainably influenced the trend towards quiet cooling systems. Besides a wide range of CPU and GPU coolers, ARCTIC offers high quality monitor mounts as well as an audio product line. The company, run by founder Magnus Huber, has locations in Germany, Hong Kong and the USA and convinces pc enthusiasts in over 45 countries with innovative and user-friendly products, high quality and fair prices. For more than 15 years ARCTIC stands for comfortable computing, excellent service and personal support.
Aluminum VGA Graphic Card Cooler – Graphic Card Fans – 3 x 80mm Fans with SATA+Aura 4PIN Connector VF-1
- 1. VF-1 is a Video card assistant cooling equipment for gamer developed by our team
- 2. The sense of the development of this products is to provide a straight-blown air supplement for those videp card which don’t have sufficient heat dissipation or inappropriate cooling channels by inappropriate case structure which will cause high video card temperature or high noise level
- 3. With VF-1, it has been tested that the temperature of the video card will drop around 5 degrees celsius (different figures will be achieved from different hardware)
- 4. There is RGB light effect on the top of VF-1, It can not only supplement the insufficient light effect of most of the video card but also provide simple and elegant light effect embellishment to the video card area
Dimensions: 134x20x270mm Connector: 4Pin Rated Voltage: DC 12V Rated Current: 0.12 Amp Rated Speed: 1500 RPM ±10% Air flow: 17.52 CFM Noise: 18 dBA Material:Aluminum
NZXT Puck – Cable Management and Headset Mount – Compact Size – Silicone Construction – Powerful Magnet for Computer Case Mounting – Black
- Made for headsets: Powerful magnets allow you to mount audio or vr headsets with ease and wind away extra cable lengths as needed
- Simple and versatile: Its unique design and powerful magnets also allow you to use each piece separately as a mount
- As clean as your build: Made of nonconductive and hazardousfree silicone, the puck can be cleaned easily and is made to last through years of use
Store VR or audio headsets easily with puck. It’s designed for simple, hassle-free cable management for any of your wired accessories. Split puck apart for extended cable coverage while powerful magnets make it easy to mount on your PC case or any magnetic surface.
Conclusion
By our suggestions above, we hope that you can found gtx 1070 liquid cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
