Which Is The Best Hot Water Heater Instant Hot

FEATURES

Instant hot water comes with powerful 5.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.

ENERGY SAVING

This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 65% energy saving with help of its smart self adjustment technology.

HEALTHY WATER QUALITY

Traditional bulky water tanks store water for long time, causing bacterial growth and rust issue, time to get clean water via a tankless hot water heater. The ECOTOUCH unit separates water and electricity line so as to avoid issue of calcium deposits.

MULTIPLY SAFETY PROTECTIONS

Over temperature protection

Dry heating protection

Leakage protection

Water and electricity line separated

EASY INSTALLATION

Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2″ NPT and 12AWG power cord(fixed to the unit) so you don’t to have to hire a plumber even if you can do it.

SPECIFICATIONS

Power: 5.5kW

Voltage: 240V~60Hz

Min. water flow to activate the unit: 0.475GMP

Max tempt rise from 67°F to 120°F @ 1GPM

Max. Amperage: 23A

Recommended wire size: 12AWG

Required circuit breaker : 1x 2-Pole 30 AMP

KINDLY NOTE

1.The unit is mainly for sinks, not for shower purpose.

2.The tankless water heater should be installed professionally.

3.Please read instruction manual carefully prior to installation and use!

PACKAGE INCLUDES

1X ECOTOUCH 5.5kW instant water heater

1X Instruction manual and warranty card

1X Installation accessories

1X Remote control(for Black model)

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with (2) 40 amp double pole breakers connected to (2) sets of #8 awg wire. Plumbing connections are 3/4″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Save water by eliminating the wait for hot water to reach the faucet. Simply tap into the water line and install the heater directly at the sink. No need for costly recirculating lines and pumps. And when you want to eliminate the wait for hot water but need more volume, install the Eco smart heater in-line with a larger hot water source, such as a tankless heater or a storage tank heater. Lightweight and compact, these units plug into a standard 110 volt outlet.

Product Description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with (1) 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

The InSinkErator HOT150 Instant Hot Water Dispenser System is the newest and most affordable addition to the Invite series. So simple and useful, once you use it, you will love it instantly.

With near-boiling water at your fingertips, you can enjoy the convenience of instantly preparing gourmet coffee and hot tea, steaming vegetables in a flash, warming baby bottles in seconds, removing candle wax from candle holders with ease, cleaning without the use of harsh chemicals, removing stubborn lids and labels, and so much more.

The HOT150 instant hot water dispenser features a modern Satin Nickel finish hot water faucet and 750-watt, 2/3-gallon stainless steel tank that delivers near-boiling water. An easy-adjustable thermostat allows you to control the temperature from 160 degrees F to 210 degrees F.

The HOT150 system is designed for do-it-yourself installation, with no special plumbing required. Convenient tool-free tank connections and dry-start protection provide easy set-up and peace of mind. The system requires an unswitched AC power outlet, dedicated control valve with compression fitting, and T-fitting. The faucet requires a standard 1-1/4-inch to 1-1/2-inch diameter hole for installation with a maximum counter thickness of 2 inches.

InSinkErator covers the HOT150 instant hot water dispensers with an exclusive 1-Year We Come to You In-Home Full Service Limited Warranty. This warranty includes free house calls (including parts and labor) for the entire warranty period.

Product Description

Specification:

• Voltage: 120 volts
• Item Weight: 8.5 pounds
• Overall Dimension: 6.2 x 6 x 5 inches
• Size: Full
• Color: Blue
• Material: Case
• Warranty: 1 Year

Never wait for hot water again! The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. System that provides instant hot water to every faucet or shower in a home when you need it. Stop throwing money down the drain and waiting for your hot water.

From the Manufacturer

The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.

FEATURES –
 
◆  Impressive Energy-Saving Performance
Because a thermoflow heats water only when it is used,unlike tank water heater , it has no standby losses, Savings of up to 50% on water heating costs. And for as long as it is needed, there is an endless supply of hot water. Nobody runs out of hot water in the shower, even if the showers run extra-long.
◆ Constant Temperature Output
Our exclusive Electric Temperature Control (ETC) ensures a steady output temperature even if flow rates vary up or down. Tankless electric water heaters from most manufactures don’t maintain a steady temperature if the incoming flow varies. A thermoflow always does.
Thermoflow tankless water heaters come with the convenience of a backlit LCD digital display and touch screen, making it easy to get hot water at the desired temperature from 32℉ (0℃), up to 140℉ (60℃) for commercial applications.
◆ Quick & Easy Installation
Our thermoflow tankless water heaters space-saving design that’s just a bit larger than a shoebox allows it to fit under the smallest places, easy installation in bathrooms, kitchens. It is also ideal for apartments as well as a wide range of business and industrial applications.
◆ No Venting Required
Thermoflow tankless water heaters are electric and require no venting. This allows for more flexibility when determining the best place for installation.

PACKAGE INCLUDES –
1X Thermoflow 12kW electric tankless water heater
1X mounting template
1X bag of installation accessories (1filter mat,4 spacers,4 gaskets,4 screws,4 anchor)
1X instruction manual

NOTICES: Please read the instruction manual carefully before you install or using the water heater !

Inquiry & aftersales service: [email protected]

Hotline:＋1（844）334-4203

Product Description

The Bosch US7 Tronic 3000 electric tankless water heater is designed to provide an endless supply of hot water to kitchen, bathroom, and handwashing sinks. This 7.2 kW electric heater eliminates long waits for hot water by using a dual chambered copper heat exchanger. The unit runs at 98% thermal efficiency, so stand-by loss is therefore minimal. Plus, it mounts on the wall in any direction and is compact and lightweight, making it a great choice for a variety of spaces. This item requires professional installation and hardwiring. With its top performance specifications and versatility, the US7 Tronic 3000 is a great way to get the hot water going in kitchens, offices, at warehouses, service stations, stores, and concession stands.

From the Manufacturer

Ultra compact and lightweight, these five point-of-use / under-sink tankless water heaters were designed to provide an endless supply of hot water for 1 kitchen and / or bathroom sink at a time in commercial, industrial, and residential applications. Advantages include 98 % efficiency with minimal stand-by loss. Most models come equipped with high / low kW settings and universal horizontal / vertical mounting options.

Conclusion

By our suggestions above, we hope that you can found hot water heater instant hot for you.Please don’t forget to share your experience by comment in this post. Thank you!