The 10 Best Inline Before Water Heater Filter

FEATURES

Instant hot water comes with powerful 5.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.

ENERGY SAVING

This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 65% energy saving with help of its smart self adjustment technology.

HEALTHY WATER QUALITY

Traditional bulky water tanks store water for long time, causing bacterial growth and rust issue, time to get clean water via a tankless hot water heater. The ECOTOUCH unit separates water and electricity line so as to avoid issue of calcium deposits.

MULTIPLY SAFETY PROTECTIONS

Over temperature protection

Dry heating protection

Leakage protection

Water and electricity line separated

EASY INSTALLATION

Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2″ NPT and 12AWG power cord(fixed to the unit) so you don’t to have to hire a plumber even if you can do it.

SPECIFICATIONS

Power: 5.5kW

Voltage: 240V~60Hz

Min. water flow to activate the unit: 0.475GMP

Max tempt rise from 67°F to 120°F @ 1GPM

Max. Amperage: 23A

Recommended wire size: 12AWG

Required circuit breaker : 1x 2-Pole 30 AMP

KINDLY NOTE

1.The unit is mainly for sinks, not for shower purpose.

2.The tankless water heater should be installed professionally.

3.Please read instruction manual carefully prior to installation and use!

PACKAGE INCLUDES

1X ECOTOUCH 5.5kW instant water heater

1X Instruction manual and warranty card

1X Installation accessories

1X Remote control(for Black model)

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Features:
The inlet way: under the influent
Surface treatment: multiple plating
Spool: diamond level ceramic spool
Heating tube: high-purity copper liner heating element
Rated voltage: 110V/50HZ
Rated Power: 2500W
Working pressure: 0.04-0.5MPA
Waterproof grade: 1PX4
Diameter: general diameter
Cord Length: about 1.5m
Plug type: designed the GN-901
The main material: H59A level environmental refined copper + ABS engineering plastics

We are totally obsessive about quality and customer service – if you have any questions please get in touch and we will do everything we can to solve them.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with (2) 40 amp double pole breakers connected to (2) sets of #8 awg wire. Plumbing connections are 3/4″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

The WSP-50 spin down sediment filter is ideal for filtering out course sediment larger than 50 micron. The stainless steel screen makes the flushing and cleaning process very simple, allowing flushing of the contaminants through the bottom of the filter when the cartridge begins to get clogged. This allows the stainless steel filter cartridge to be used over and over again without needing to be replaced. The 1 inch outlet MNPT fitting provides a maximum 20 gpm flow rate, and the WSP-50 also features 3/4 inch NPT threads on the inlet and outlet. The housing is manufactured with FDA approved grade materials.

Specifications:

Mesh pore rating: 50 micron
Dry weight: 1 lb
Dimensions: 3.5″ width x 9″ height
Suitable temperature range: 40 – 100 °F
Suitable pressure range: 20 – 90 psi

Product Description

If you’ve got A3 maqua-pure AP430 or ap430-ss hot water filter system, and you need some Replacement filters, look no further. The AP431 is the Replacement filter for your system.

From the Manufacturer

The Aqua-Pure® Replacement Cartridge AP431 for the Aqua-Pure® scale inhibition system helps protect water heaters, dishwashers, clothes washers, and plumbing from corrosion and scale build-up. The cartridge provides a good flow rate for residential and light commercial applications. A slow dissolve rate provides consistent dosing and long cartridge life.

Manufactured by 3M Purification Inc., formerly CUNO Incorporated, the Aqua-Pure AP431 Replacement Cartridge is made from FDA DVR-21 compliant materials. It fits a canister unit 10-1/4 inches (26 cm) high and 2-3/4 inches (7 cm) in diameter. Designed for use in a cold-water line before the water heater system, the cartridge will operate at temperatures up to 100°F (37.8°C) and at water pressure up to 125 psi (862 kPa). It has a flow rate of up to 10 gallons (37.9 liters) of water per minute. The cartridge should be replaced every six months at a minimum. It is for use with Aqua-Pure AP430SS Scale Inhibitor System.

According to the U.S. Geological Survey, over 70% of U.S. water supplies are designated as hard to very hard (containing elevated levels of calcium, magnesium, or both).* A visible indication of hard water is the appearance of white spots on faucets, shower doors and dishware. A less visible but more serious problem is build-up of lime and other minerals on plumbing fixtures and appliances that use water—especially water heaters. This build-up, or scale, can result in damage to fixtures and appliances, shortening their useful life. If your water is hard, Aqua-Pure® AP430SS Scale Inhibition System may provide economical, efficient protection.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. 3M Purification Inc. (formerly CUNO Incorporated), provides filtration and separation solutions for food service, science labs, residential, marine, and other applications. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

The iSpring ED2000 whole house electronic water descaler is an innovative, computerized water conditioning system that solves hard water problems without the need for chemicals, salt, or filter cartridges by leaving the minerals in the water and preventing them from forming the limescale deposits. It requires little maintenance as it does not need the constant salt additions or cartridge replacements that traditional water softening systems require.The ED2000 functions by wrapping two antenna cables around the main water pipe to form a coil, creating a complex, frequency modulated, electronicmagnetic waveform. This induces an oscillating electric field into the water, resulting in the agitation of water molecules sufficient enough to trigger the release of carbon dioxide and cause the premature precipitation of calcium bicarbonate. This process naturally results in a small increase in solubility, which allows the now unsaturated water to dissolve existing scale deposits and remove them from the water system.Limescale deposits on your fixtures will soften over time after regular contact with the treated water from the ED2000. This allows for easier cleaning of fixtures without the use of chemicals. Deposits on shower heads, sinks, and faucets will easily wipe off. The treated water will also allow soap to lather up more effectively, leaving skin feeling smoother and hair more manageable.For water over 25 grains of hardness, it’s recommended to use a traditional water soften in addition to the ED2000. Water with high iron content (over 0.3ppm) should use an iron removal filter prior to the ED2000. Homes with water mains over 1" but less than 1.5" may need to use two ED2000 side by side, and water traveling more than 50 feet may require an additional ED2000 farther down the plumbing line.For product support or technical assistance contact iSpring Water Systems M-F 9-5 EST at 678-261-7611 or email [email protected].

SHURFLO CLASSIC SERIES STRAINER – Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly onto the pump head. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly. Easy Assembly. Keeps Debris Out of Pump. Easy to See When Strainer Needs Cleaning. 50 Mesh Stainless Steel Screen. Twist-On Water Strainer, 1/2 inch NPSM Inlet, 1/2″ NPSM Outlet.

Conclusion

By our suggestions above, we hope that you can found inline before water heater filter for you.Please don’t forget to share your experience by comment in this post. Thank you!