Best Monoblock Water Cooling

EK-Momentum ROG Maximus XI Extreme D-RGB is the new Quantum Line monoblock specifically engineered for ROG Maximus XI Extreme motherboards. 

EK® Momentum series monoblocks utilize the 5th generation of the EK® CPU water block cooling engine, further tweaked for performance and optimal coolant flow! This water block directly cools Intel® 1151 socket type CPU, as well as the power regulation (MOSFET) module. Like with every EK monoblock, it features high flow design and it can be easily used with a system using weaker or lower speed pumps.

The purest nickel-plated copper available on the market is used for the EK-Momentum cold plate which is precisely machined to a dense micro-fin structure. This Z390 monoblock also comes with a special cold plate which ensures that the monoblock has better mechanical contact with the IHS of 8th and 9th gen Intel 1151 socket based processors.

Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation. The enclosed thermal pad is used on voltage regulator modules to improve stability, performance and prolongs the lifespan of the motherboard. For the CPU, please use the enclosed thermal grease EK-TIM Ectotherm.

This product is compatible with ASUS Aura RGB software. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the RGB header.

Enclosed:
– EK-Momentum ROG Maximus XI Extreme D-RGB Monoblock
– Mounting mechanism
– Thermal pads / grease EK-TIM Ectotherm
– Backplate

PLEASE NOTE:

• TO PREVENT DAMAGE, YOUR COOLANT MUST CONTAIN ANTICORROSIVES AND BIOCIDES
• This product should NOT be installed with any aluminum EK Fluid Gaming parts!
• Using delidded CPUs with monoblocks is not recommended as it can lead to poor cooling contact and performance.

Model: 3831109815731

EK-Momentum ROG Strix Z390-I D-RGB is the new Quantum Line monoblock specifically engineered for ROG Strix Z390-I motherboards. 

EK® Momentum series monoblocks utilize the 5th generation of the EK® CPU water block cooling engine. It directly cools Intel® 1151 socket type CPU, as well as the power regulation (MOSFET) module. Like with every EK monoblock, it features high flow design and it can be easily used with the system using a weaker water pump or lower pump speeds. The Momentum monoblock also comes with sophisticated D-RGB (addressable) lightning which connects to a standard 3-pin 5V D-RGB header.

The purest nickel-plated copper available is used for the EK-Momentum cold plate which is precisely machined to a dense micro-fin structure. This cold plate also ensures that the monoblock has better mechanical contact with the IHS of 8th and 9th gen Intel 1151 socket based processors. Top of the monoblock features a CNC machined glass like Acrylic top piece.

This product is compatible with ASUS Aura RGB control software. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the RGB header.

Technical specifications:
– RGB connector 3-pin 5V digital LED header (Pinout: +5V D G)

Enclosed:
– EK-Momentum ROG Strix Z390-I D-RGB Monoblock
– Mounting mechanism
– Thermal grease/pads
– Backplate

PLEASE NOTE:

• The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel plated water block!
• This product should NOT be installed with any aluminum EK Fluid Gaming parts!
• Using delidded CPUs with monoblocks is not recommended as it can lead to poor cooling contact and performance.
• The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB(A-RGB) header.

Model: 3831109814062

EK-Momentum ROG Maximus XI Hero D-RGB is the new Quantum Line monoblock specifically engineered for ROG Maximus XI Hero motherboards.

This water block directly cools Intel® 1151 socket type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Features a high flow design and it can be easily used with the system using a weaker water pump or lower pump speed settings as well. The Momentum monoblock also comes with sophisticated D-RGB (addressable) lightning which connects to a standard 3-pin 5V D-RGB header.

The purest nickel-plated copper available on the market is used for the EK-Momentum cold plate which is precisely machined to a dense micro-fin structure. This Z390 monoblock also comes with a special cold plate which ensures that the monoblock has better mechanical contact with the IHS of 8th and 9th gen Intel 1151 socket based processors, thus enabling better thermal transfer. The nickel plated brass screw-in standoffs are pre-installed and allow for easy installation. Top of the monoblock features a CNC machined glass like Acrylic top piece.

The new cooling engine is characterized by the top-integrated jet nozzle which is combined with a thicker jet plate allowing a more precise bow control. The simplified water block structure offers a more optimized coolant flow and easier maintenance, while the jet plate ensures the best contact surface for the CPU.

Enclosed:
– EK-Momentum ROG Maximus XI Hero D-RGB Monoblock
– Mounting mechanism
– Thermal grease EK-TIM Ectotherm
– Thermal pads
– Backplate

PLEASE NOTE:

• This product should NOT be installed with any aluminum EK Fluid Gaming parts!
• Using delidded CPUs with monoblocks is not recommended as it can lead to poor cooling contact and performance.

Model: 3831109814048

The EK-Momentum MSI Z390 MEG Godlike D-RGB is a new Quantum Line monoblock specifically engineered for MSI Z390 MEG Godlike motherboard. Featuring the latest cooling engine with low restriction and high performance, it is also fully addressable D-RGB enabling you to take control of every LED separately.

This water block directly cools Intel® 1151 socket type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. The Momentum monoblock also comes with sophisticated D-RGB (addressable) lightning which connects to a standard 3-pin 5V D-RGB header.

The purest nickel-plated copper available on the market is used for the EK-Momentum cold plate which is precisely machined to a dense micro-fin structure. This Z390 monoblock also comes with a special cold plate which ensures that the monoblock has better mechanical contact with the IHS of 8th and 9th gen Intel 1151 socket based processors, thus enabling the superior thermal transfer.

The new cooling engine is characterized by the top-integrated jet nozzle which is combined with a thicker jet plate allowing a more precise bow control. The simplified water block structure offers a more optimized coolant flow and easier maintenance, while the jet plate ensures the best contact surface for the CPU.

This product is compatible with MSI Mystic Light RGB control software. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the RGB header.

Technical specifications:
– RGB connector 3-pin 5V digital LED header (Pinout: +5V D G)

Enclosed:
– EK-Momentum MSI Z390 MEG Godlike D-RGB Monoblock
– Mounting mechanism
– Thermal grease EK-TIM Ectotherm
– Thermal pads
– Backplate

Model: 3831109814994

This is a complete all-in-one (CPU and motherboard) liquid cooling solution for the MSI X470 Gaming Pro Carbon socket AM4 motherboard that supports the second generation of AMD Ryzen and 7th Generation A-series/Athlon processors. Designed and engineered in cooperation with MSI, this monoblock uses award-winning EK-Supremacy EVO cooling engine to ensure the best possible CPU cooling. This water block directly cools AMD AM4 socket type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, EK-FB MSI X470 Pro Carbon RGB features high flow design and it can be easily used with the system using a weaker water pump or lower pump speed settings as well. This AM4 socket based monoblock also comes with a special cold plate which ensures that the monoblock has better mechanical contact with the IHS of AMD AM4 socket based processors, thus enabling better thermal transfer. The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The nickel plated brass screw-in standoffs are pre-installed and allow for easy installation. A standard 4-pin 12V RGB LED strip is installed in the monoblock that connects to the motherboard’s 4-pin LED header or it can be connected to any other standard 12V 4-pin LED controller. The LED strip cover can easily be removed for adjusting the cable orientation or replacing the ordinary LED strip with a Digital LED strip or any other custom solution as well! The enclosed Digital RGB LED strip is compatible only with the dedicated 3-pin digital LED motherboard header. For the CPU, please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm.

Model: 3830046998194

Opt for the best. Choose a model of EKWB EK-FB ASUS ROG R6E RGB Monoblock – Nickel. At the délà the performance which is the usual high standard of both looks and quality of production.

The EK-FB ASUS Strix X470 RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for AMD X470 Chipset AM4 socket based ASUS ROG STRIX X470-F GAMING motherboard that supports the second generation of AMD Ryzen and 7th Generation A-series/Athlon processors. Designed and engineered in cooperation with ASUS, this monoblock uses award-winning EK-Supremacy EVO cooling engine to ensure best possible CPU cooling. This water block directly cools AMD AM4 socket type CPU, as well as the power regulation (MOSFET) module of the motherboard. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, The EK-FB ASUS Strix X470 RGB features high flow design and this monoblock can be easily used with the system using a weaker water pump as well. The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The nickel plated brass screw-in standoffs are pre-installed and allow for easy installation. This is the world’s very first monoblock for X470 chipset based motherboards. The specially designed cold plate ensures that the monoblock has better mechanical contact with the IHS of AMD AM4 socket based processors, thus enabling better thermal transfer. The monoblock is equipped with a 4-pin RGB LED strip that connects to the motherboard’s 4-pin LED header (if supported) or it can be connected to any other 4-pin LED controller. The LED strip cover can easily be removed for adjusting the cable orientation or replacing the LED strip with a custom solution as well! Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation.

Model: 3830046998217

EK-FB ASUS X399 GAMING RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for three ASUS AMD X399 Chipset based motherboards that support AMD SocketTR4 AMD Ryzen Threadripper processors. This monoblock is compatible with the following ASUS motherboards: ASUS ROG Zenith Extreme, ASUS PRIME X399-A, and ASUS ROG Strix X399-E Gaming. Designed and engineered in cooperation with ASUS, this monoblock uses award-winning EK-Supremacy EVO cooling engine to ensure best possible CPU cooling. This water block directly cools AMD Socket TR4 type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Using such a monoblock gets rid of the small fan that can be found on some X399 motherboards, hidden under the I/O cover. This X399 platform based monoblock also comes with a redesigned bigger cold plate. The new design ensures that the monoblock has mechanical contact with the entire Ryzen Threadripper processor IHS, thus enabling better thermal transfer. The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The main nickel plated mounting screws and brass screw-in standoffs are pre-installed so that the installation process is quick and easy. The monoblock is equipped with a Digital RGB LED strip that connects to the dedicated digital 4-pin header on the motherboard. ASUS X399 series motherboards use the most advanced LED system on the market allowing a new world of illumination possibilities. Using the digital LED header, users can individually address color to each LED on the monoblocks integrated Digital LED strip. The LED strip cover can easily be removed for adjusting the cable orientation or replacing the Digital LED strip with an ordinary LED strip or any other custom solution as well!

Model: 3830046994455

EK-FB ASRock X399 RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for three ASRock® AMD® X399 Chipset based motherboards that support AMD Socket TR4 AMD Ryzen™ Threadripper™ processors. This monoblock is compatible with the following ASRock® motherboards: ASRock X399 Taichi ASRock Fatal1ty X399 Professional Gaming Designed and engineered in cooperation with ASRock®, this monoblock uses a completely new cooling engine that ensures excellent CPU cooling performance. This water block directly cools the AMD® Socket TR4 type CPU, as well as the power regulation module (VRM). Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. This X399 platform based monoblock features a redesigned cold plate with a fin area that covers most of the Ryzen™ Threadripper™ IHS surface. The design also ensures that the monoblock cold plate is covering the entire Ryzen™ Threadripper™ processor IHS, thus enabling better thermal transfer. The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The main nickel plated mounting screws and brass screw-in standoffs are pre-installed so that the installation process is quick and easy. The monoblock is equipped with an RGB LED strip that connects to the 4-pin header on the motherboard. ASRock® X399 series motherboards feature advanced LED controlling options allowing a new world of illumination possibilities. The LED strip cover can easily be removed for adjusting the cable orientation or replacing the Digital LED strip with an ordinary LED strip or any other custom solution as well! Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation.

EK-FB ASUS M9H Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for Intel® LGA-1151 socket Kaby Lake® CPU and the ASUS® ROG Maximus IX Hero motherboard. Designed and engineered in cooperation with ASUS®, this monoblock uses the award-winning EK-Supremacy EVO cooling engine to ensure best possible CPU cooling performance. This water block directly cools Intel LGA-1151 socket type CPU and power regulation (MOSFET) module as water flows directly over all critical areas. It is a very high flow water block that can be easily used with the system using weaker water pumps.

Conclusion

By our suggestions above, we hope that you can found monoblock water cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!