Best Racor Fuel Filter Water Separator

If you have difficulty in installing, you can go to YouTube to find the appropriate installation video:https://www.youtube.com/watch?v=LyeqTDVzY-A.

Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.

Product details:
1.Don’t be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3.The inlet and out let can be feed in on the same side or in one side out the other side.
4.Check and replace regularly.

R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.

Item specifics:
PRODUCT TYPE : Filter Fuel/water Separator
-This listing is for one (1) unit. This is a new For Racor R12T Marine Fuel Filter / Water Separator complete assembly.
Product Type Filter Fuel/Water Separator
Description Replacement Fuel Filter/Water Separator
-Maximum Flow Rate 15 GPH (57 LPH)
-Filter Rating 10 Micron
-Port/Connecting Size M18 X 1.5 Center Thread
-Additional Detail Used In Model 120A Filter Assembly
Dont’ be caught in the water without one of these diesel spin-on filters. filters are designed for high performance applications, and with flow rate of 15 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. These filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance. The unit features Racor’s famous Aquabloc II technology. This spin-on filter design is simple to replace and the reusable clear plastic collection bowl and features a self-venting drain for removing unwanted muck and water.

Racor Gas Spin-On Filter/Water Separator-Replacement Filter ONLY S3227 Marine MD

Water is your engine’s number 1 enemy – no matter how carefully fuel is handled, water and other contaminants can find their way into it. Protect your engine with a Racor fuel/water separator. Diesel engine fuel systems recirculate fuel, actually “creating” water when warm fuel returns to a cold tank.Using a fuel filter/water separator ensures that fuel arrives at your engine clean and water-free. Most stock filters only filter particles from the fuel, allowing water to pass through your fuel system, causing rust and corrosion. Using a patented “Aquabloc” element, Racor fuel filters remove emulsified water and particles down to two microns in size. Fittings not included. For UL and USCG accepted filter/separators, call our Engine Parts Specialists at 800-528-4828.

Spin-on series diesel filter/water separators were designed with the marine engine in mind. Compact in size, they utilize a flexible mounting head for remote or on engine mounting. Ideal for tight engine compartments. Filtration options provide for a variety of micron ratings and ensure virtually 100% removal of water and solid contaminants for diesel engines. Flow rate: 15 GPH Element: R12 Size LWD”: 5.7 X 3.2 X 3.2

Turbine Series High Capacity Diesel Filter/Water Separators remove virtually 100% of the damaging water and solid contaminants from diesel fuel. Aquabloc® replacement elements trap solids as small as 2 microns and actually repel water. (MA) models include a metal shield are UL-listed and USCG accepted. (P) models include a water sensor probe. (X) models a single valve to isolate 1 filter/separator for service. For double manifolds, specify (75) models. Last digit(s) indicate the microns in the filter provided with the unit.

MAXIMUM FLOW RATE: 60 GPH (227 LPH)
FILTER RATING: 2, 10, and 30 micron
PORT/CONNECTION SIZE: M14*1.5
ADDITIONAL DETAIL: 15 PSI (1.03 bar) Max Pressure

Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel
equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns.
10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.

Conclusion

By our suggestions above, we hope that you can found racor fuel filter water separator for you.Please don’t forget to share your experience by comment in this post. Thank you!