Which Is The Best Rv Refrigerator Exhaust Fan

Top sale products in Germany! Popular DIY fan on updating ventilation

Great for refrigerator vent fan in camper van or ventilation cabinet.
TITAN multi-purpose rack mounting fan with speed controller

With functional rack mounting set, make you easily install on any places near the device you want to cool down and reinforce ventilation immediately.

Equipped two TITAN exclusive silent but strong airflow fan and speed controller which can switch auto and manual, you can both have a whisper operation experience and perfect cooling performance. Perfectly monitor silent operation and airflow performance by auto or manual speed control.

You do not need to design a DIY fan and speed controller to fit your all cooling requirements. This is the perfect cooling solution made for you. All of them we have prepared, experimented and mostly assembled. The only things you need to think is where to cool and easy install. There are also three sizes for you to choose: 90mm, 120mm, and 140mm. Let’s give it a try! Away from the hot air right now.

SPECIFICATION

TTC-SC09TZ(A)
Outline Dimension: 194 x 96 x 31 mm
Fan Dimension: 92 x 92 x 25 mm
Rated Voltage: 12V DC
Rated Current: 0.48 A
Power Consumption: 5.76 W
Rated Speed: 2600 RPM
Airflow: 106.2 CFM
Static Pressure: 0.13 Inch H₂O
Noise Level: < 25="">
Connector: 3-PIN
Bearing Type: Z-AXIS
Life Time: 60,000 Hours

Application
-Refrigerator/ fridge ventilation cooling fan
-Car amplifier ventilation fan
-Teletphone trminal wall Cabinet cooling fan
-Wall cabinet mounted ventilation cooling fan

– Got a question? Ask us now in the “Customer Questions & Answers” near the end of this page.

Click the ‘Add to Cart’ button in the upper right corner of screen before we’re out of stock.

-WARNING: Do not attempt to revise polarity to change the airflow direction. It would not revise the airflow direction. The airflow would blow out from the cross grille side of the fan. If you revise the polarity (positive to negative), the fan and controller would not work. Please connect the cable to the same polarity (positive to positive/ negative to negative)

The refrigerator should be installed on or close to the cooling fins of the refrigerator.
You should install the double fan in any case so that the extracted hot air can somehow escape outside, preferably through ventilation slots in the caravan. You can install the double fan in both the lower and upper ventilation shafts. However, we recommend the installation in the upper ventilation slots, because if your refrigerator is operated with gas, the burner is usually located near the lower ventilation slots and then the gas supply might be hindered by the double ventilator.

Valterra’ FridgeCool Exhaust Fan keeps refrigerator coils cool and working efficiently with a wind tunnel design. It is fully automatic with no need for switches, activating when the fridge is on and the temperature is hot. The fan installs at the top of the roof vent or under the fridge coils for best cooling. 12.5 CFM / 49.8 MA. 2-3/4″ x 3-1/2″.

Keeps your RV refrigerator frost free. Work with any model RV Refrigerator. Our “Frost Guard” series is Easy install with only one wire DC connection needed and one ground connection. Slide fan lead through the drain tube to make the DC connection at the back side. Very low amp draw. Makes the inside an even coldest top to bottom. Allows refrigerator to get cold faster. Allows you to lower the thermostat setting number and still maintain cold temps. Takes up no space when attached to fins. Fan frame size is 15 3/4 x 4 3/16 inches and only 1/2 inch thick. Fan amp draw per fan is 0.07A.

About Fan-Tastic Vent: Fan-Tastic Vent was chartered as a stock corporation in 1984 and in 1985 began production of a 12-volt high efficiency ceiling fan in Burton, Michigan. In its first year the company employed 4 people and built approximately 2,000 fans. As sales continued to grow, the company moved to a larger facility in Capac, Michigan, in 1995. In an unfortunate turn of events, a devastating fire followed the move in January of 1997, resulting in a total loss. Incredibly, the company rebounded much faster than the industry or the community anticipated. In just eleven days Fan-Tastic Vent was able to resume production. In 2010, Fan-Tastic Vent was acquired by Atwood Mobile Products LLC, a leading supplier to the recreation vehicle industry. Today Fan-Tastic Vent continues to be one of the most recognized brand names in the industry and has sold over 3 million fans.

We have changed our frame design to be a little larger than picture shows, also the frame color will be White. New pictures will displayed soon. Keeps your RV refrigerator frost free. Work with any model RV Refrigerator. Easy install with only one wire DC connection needed. In most cases will connect to interior light or slide fan lead through the drain tube to make the DC connection at the back side. Very low amp draw. Makes the inside an even coldest top to bottom. Allows refrigerator to get cold faster. Allows you to lower the thermostat setting number and still maintain cold temps. Takes up no space when attached to fins. Fan frame size is 6 1/2 inch x 4 inches and only approximate 1/2 inch thick. Each of the fans measures 2 3/8 x 2 3/8 inch and 5/16 thick. Fan amp draw per fan is 1/10 of an amp. All fans a shipped by USPS Mail. No UPS or FedEx

NORCOLD 619020 FAN KIT-DOUBLE SIDE WALL

Ventmate Refrigerator Vent Lid. Polar white color. Made of high impact plastic. UV stabilized. This is a direct replacement lid for Dometic new style refrigerator vents. Screw hole spacing measures approximately 21-11/16” by 4-1/2”. The overall dimensions of the cover are approximately 27-1/4” by 11”.

Conclusion

By our suggestions above, we hope that you can found rv refrigerator exhaust fan for you.Please don’t forget to share your experience by comment in this post. Thank you!