Which Is The Best Sea Water Cooling System Cleaner

Seaflo Marine Raw Cooling Water Intake Strainer

.12 oz. Mini/Trial Size – measures approximately 2″ high.

Suitable for normal, dry, oily, and combination skin.

Formulated with caffeine and seawater to cool, de-puff, and energize.

Red Sea Max C-130 and Red Sea Max C-250 Replacement Water Cooling Fan. Red Sea Part # 40502.

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.

Specifications

Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics

Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)

Instructions
1.Double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
4.Start pump and begin circulating the treated solution.
5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
8.Drain system.**.
9.Fill loop with your choice of coolant and begin water-cooling.
** Reboot needs to be flushed from the system until no foam is seen and water runs clear

Warnings

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
Specifications

Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
Instructions
1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated water.
6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
8.Fill loop with your choice of coolant and begin water-cooling.**

** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.

Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
PrimoChill is not responsible for any hardware damage. Use at your own risk.

Prestone Radiator Flush and Cleaner is a 2-in-1 formula designed for light flushing and heavy-duty cleaning for cooling systems to help prevent overheating, the #1 cause of engine failure. This premium formulation is designed to remove heavy rust and scale deposits in neglected cooling systems. These deposits can dramatically restrict coolant flow and reduce heat transfer, which may lead to possible overheating, breakdown, or costly repair. A super-chelating additive effectively removes heavy deposits by drawing metal oxides into the solution. Though strong enough to help restore maximum cooling system efficiency, this non-toxic, non-acidic product is easy-to-use and safe for all cooling system metals.

THEROCURE by Evapo-Rust cures engine overheating by removing the rust from your cooling system. If your car, truck, or tractor is overheating, try Thermocure. Just 1 quart will service cooling systems up to 3 gallons. THERMOCURE Cooling System Rust Remover & Flush uses the technology in rust and corrosion removal to completely revitalize any water cooled engine. It removes rust scale and deposits from radiators, water pumps, water jackets, engine blocks, and heads. Thermocure will restore your engine’s ability to transfer heat to the coolant, which allows engines to run cooler and last longer. Thermocure is non-toxic, contains no acids, is biodegradable, safe on skin, and has no fumes. THERMOCURE Removes even heavy rust completely, is non-toxic, non-corrosive, is safe on skin and eyes. Contains NO acids, bases, solvents or other toxic ingredients, it will not harm un-rusted steel, safe on other metals, plastic, PVC and most paints.

Seaflo Marine Raw Cooling Water Intake Strainer

Introduction
Meet SEAFLO’s brand new raw water intake strainer. This strainer efficiently and effectively keeps unwanted particles and debris from raw water intake out of your engine for optimal performance and longevity. Not only can you use this strainer with engine cooling, you can also insert it into applications such as Air Conditioning, Shower Sumps, Washdown Kits, and many more!

A transparent cover makes it easy to see when the strainer needs to be cleaned out without having to interrupt the system. Large surface filter means it rarely clogs & cleans easily and quickly. Rugged construction eliminates corrosion problems and offers a range of three different hose connections. This strainer’s unique design allows it to be connected to either 1/2″, 5/8″, & 3/4″ size hoses or 1″, 1.25″, & 1.5″ Hose based on your choice. All SEAFLO products also come with a 4-Year Limited Warranty!

Details
Primarily used for engine cooling with raw water intake
Also used in other marine applications such as air conditioning, shower sumps, and washdown
Protects engine from harmful particles and debris
Transparent top allows for easy view of the strainer
Strainer top twists off for ease of access and cleaning
Works with either 1/2″, 5/8″, and 3/4″ hose sizes or 1″, 1.25″, & 1.5″ hose sizes based on your choice
4-Year Limited Warranty

Technical specifications
Inlet and Outlet Sizes: 1/2″, 5/8″, 3/4″
Reccomended Input (GPM) for Hose Size: 1/2″ – 6 GPM, 5/8″ – 9 GPM, 3/4″ – 13 GPM, 1″ – 24 GPM, 1.25″ – 38 GPM, 1.5″ – 53 GPM

Even if you want test the motor, it should be done in the river!

When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked 

Please notice:

What you will receive is our new version of this boat engine

Transom height: 42cm

Full throttle perating range: 4000-5000r/min

Maximum output:2.5kw(3.5HP)

Speed:12km/h(four people)

Type:2-stroke

Propeller mark:7-1/45-A(inch)

The engine and the propeller ratio:2:1

Recommended fuel:Regular unleaded gasoline

Fuel to oil ratio: 35:1(Please be suject to this version, and disregard the manual about this point)

Gear ratio: 27/13

Announcements:

After in the sea water or turbid water cruising

1. Use the fresh water cleaning the outboard motor

2. With the moderate velocity circulating the engine, cool off the water chanel with fresh water.

3. Before completely running out cooling water, don’t put the outboard motor outside. Otherwise 

the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.

4. The engine should deposit in the aridity and ventilated well place, avoid exposing directly in the sunshine.

5. Before the long term storing,you should run out of the gasoline in the fuel tank.

Notice: Please add gear oil to the gears before use the motor and replace gear oil after the run-in period（10hours）. (if you do not know how to handle this, please contact with us ) 

Conclusion

By our suggestions above, we hope that you can found sea water cooling system cleaner for you.Please don’t forget to share your experience by comment in this post. Thank you!