dailyspect 
Nowadays, there are so many products of shark bite fittings to refrgerator ice maker in the market and you are wondering to choose a best one. You have searched for shark bite fittings to refrgerator ice maker in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings shark bite fittings to refrgerator ice maker which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
- INSTALLS IN SECONDS: 1/2″ x 1/2” x 1/4″ threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.
SharkBite 25024 Plumbing Installation Kit
- Lead free dzr Brass construction for Durability and reliability
- For use with Copper or cpvc pipe
- Innovative push-to-connect design makes for quick and easy installation
- Corrosion resistant to improve longevity
- Listed by iapmo and design certified and listed to asse 1061/NSF 61
The SharkBite ice maker installation kit has everything you need to install the water supply to your ice maker. The kit includes 1 SharkBite 1/2 in. Service slip tee, one 1/2 in. X 1/4 in. (3/8 in. O.D.) push-to-connect angle stop valve, a 10 ft. Coil of 1/4 in. Pex pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression connector, and a 1/2 in. And 1/4 in. Disconnect clip to remove the pipe from the fitting if needed. The SharkBite service slip tee allows you to remove up to 2 in. Of your existing copper or cpvc line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. Pex coil connects to the push-to-connect angle stop valve 1/4 in. Outlet and the 1/4 in. Ice maker connector which will thread onto your ice maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.
Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- LEAD FREE COMPLIANT: DZR lead free brass SharkBite valves
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.
METPURE EZ RO Universal Water Supply Adapter
Metpure EZROADP14 water supply valve allows users to connect and disconnect 1/4″ water supply outlets quick and easy without the need of any other tools. Applications include reverse osmosis drinking water, multimedia filters, beverage dispensing, coffee machines, RV and Marine, misting systems, ice makers and many more.
SharkBite U359LFA 1/2-Inch by 1/2-Inch by 1/4-Inch Reducing Tee Retail Packaging
- The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination
- No soldering, clamps, unions or glue required
- Certified to 200 PSI and 200-DegreeF
- Compact, robust DZR brass body is the foundation of a strong, corrosion resistant, durable fitting
- The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination
- Certified to 200 PSI and 200-DegreeF
- Compact, robust DZR brass body is the foundation of a strong, corrosion resistant, durable fitting
Product Description
The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, debar, mark the pipe approximately 1 (for proper insertion depth), install pipe to proper depth and you’re done.
From the Manufacturer
The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, debar, mark the pipe approximately 1 (for proper insertion depth), install pipe to proper depth and you’re done.
John Guest PPSV040808WP Single Straight Shut-Off Valve, 1/4" Tube OD x 1/4"
- John Guest push-to-connect technology provides a simple, reliable, leak-free connectionManufactured from white polypropylene and equipped with EPDM O-rings
- Can be used with plastic or soft copper tubing,Truly demountable without damage to pipe or fitting
- Lead-free, corrosion free, non-toxic, and more chemically resistant than other plastics Manufactured with FDA compliant materials and NSF 61 and 51 certified
- Provides a permanent/removable leak-proof connection, Corrosion free
- Suitable for water and food applications, FDA Approved
Product Description
Jg Speed fit Ppsv040808Wp 1/4″ X 1/4″ Od Valve Start, White the Ppsv Range And Shut-Off Valve Is Offered For Tube Sizes 1/4″ O.D. And 3/8″ O.D., Produced In Polypropylene And Fitted Epdm O-Rings. Polypropylene Has The Advantage Of Being More Chemically Resistant Than Acetal. The Valves Are Use With Potable Water. Jg Speed fit Ppsv040808Wp 1/4″ X 1/4″ Od Valve Start, White Features: Designed For Hot And Cold Water And Radiant Heating Systems Push Fit Fittings Twist And Lock For Added Security No Tools Required Works With Copper, Cvpc, And Pex Pipe Permanent Leak-proof Connection Easy To Install Lead Free 1/4″ X 1/4″ Od
From the Manufacturer
JG Speedfit is the easy to use, plastic push-fit system suitable for the plumbing of hot and cold water services and heating applications.
PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Stop Tee For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked High Density Polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections.
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The stop tee valve quickly and neatly connects to your current set up to divert the water where you want it to go.
- COPPER STOP TEE allows you to safely use this set up for your ice makers, humidifiers, water filters and other potable drinking water applications. Stop tee measures 1/4″ x 3/8″ x 3/8″ and is ready to connect to existing supply stops.
- HIGH QUALITY AND SAFE PEX AND COPPER. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper stop tee is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly.
- LIMITED LIFETIME WARRANTY. 25 feet of PEX tubing and 1/4” x 1/4” compression fitting. Stop tee measures 1/4″ x 3/8” x 3/8”. Limited lifetime warranty. Choice Hose and Tubing part number 509 5164K.
Complete Ice Maker And Humidifier Installation Kit | 25’ PEX Tubing, With Easy To Use Stop Tee, Includes Everything Necessary For A Complete Installation
Ice Maker And Humidifier Installation Kit by Choice Hose And Tubing | Poly Tubing, Includes Everything Necessary For Complete Installation
- EASILY CONNECT TO YOUR REFRIGERATOR OR FREEZER. Attach to your fridge / freezer and enjoy a cup of delicious, crisp water with crystal clear ice cubes in no time! Great for both on-the-door ice/water dispensers and in-freezer ice cube machines. Poly tubing is lead-free and completely safe for potable water, and will leave your water tasting as fresh and pure as before.
- SET UP YOUR HUMIDIFIER/EVAPORATIVE COOLER IN NO TIME! Quickly and easily attach to your boiler or furnace, then sit back and enjoy the results. Poly tubing is durable and reliable
- connect your humidifier now and enjoy it for years to come.
- POLY TUBING is durable, reliable, and will leave your water tasting as fresh and pure as before. Set includes ¼” X 25’ poly tubing- enough to comfortably accommodate any ice maker/ humidifier/ evaporative cooler installation.
- COMPLETE INSTALLATION KIT includes poly tubing, self-piercing saddle valve, and fittings This universal, all-inclusive kit is designed with metal fittings to ensure a solid and dependable connection. Included instructions make DIY installation a breeze!
- NO NEED TO TURN OFF WATER. Easily complete installation without the hassle of shutting off your water supply while you work. EASY DO-IT-YOURSELF INSTALLATION. Includes step-by-step instructions. Limited lifetime warranty. Manufacturer part number 509 5100R. Make it yours today!
Get your appliances set up quickly and easily with this ice maker/ humidifier/ evaporative cooler installation kit. Poly tubing is durable and reliable, and will not ruin the fresh taste of your water. This complete installation kit includes everything necessary for installation, plus step-by-step instructions to make D-I-Y installation a breeze. Best of all, there’s no need to shut off your water supply during installation! Limited lifetime warranty. Make it yours today!
iSpring ICEK Ultra Safe Fridge Water Line Connection and Ice Maker Installation Kit for Reverse Osmosis Systems & Water Filters
- Connects any water filtration system (including reverse osmosis systems) to the ice maker or water dispenser of your fridge
- Delivers crystal clear ice cubes and great tasting RO water to your fridge, superior to inline fridge filters
- Kit includes everything you need for the installation – 20 feet 1/4″ tubing, a 1/4″ x 1/4″ x 1/4″ “T” valve, an inline 1/4″ x 1/4″ shut off valve, and a compression fitting set. Tested by independent third-party to meet NSF/ANSI Standards
- Durable and easy to install – Push-in quick connect fittings offer easy DIY installation with no tools required
- Push-in quick connect fittings offer easy DIY installation with no tools required
The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.
Conclusion
By our suggestions above, we hope that you can found shark bite fittings to refrgerator ice maker for you.Please don’t forget to share your experience by comment in this post. Thank you!
