dailyspect 
Nowadays, there are so many products of sharkbite ice maker water line in the market and you are wondering to choose a best one. You have searched for sharkbite ice maker water line in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings sharkbite ice maker water line which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
26,037 Reviews Scanned
SharkBite 25024 Plumbing Installation Kit
- Lead free dzr Brass construction for Durability and reliability
- For use with Copper or cpvc pipe
- Innovative push-to-connect design makes for quick and easy installation
- Corrosion resistant to improve longevity
- Listed by iapmo and design certified and listed to asse 1061/NSF 61
The SharkBite ice maker installation kit has everything you need to install the water supply to your ice maker. The kit includes 1 SharkBite 1/2 in. Service slip tee, one 1/2 in. X 1/4 in. (3/8 in. O.D.) push-to-connect angle stop valve, a 10 ft. Coil of 1/4 in. Pex pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression connector, and a 1/2 in. And 1/4 in. Disconnect clip to remove the pipe from the fitting if needed. The SharkBite service slip tee allows you to remove up to 2 in. Of your existing copper or cpvc line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. Pex coil connects to the push-to-connect angle stop valve 1/4 in. Outlet and the 1/4 in. Ice maker connector which will thread onto your ice maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.
SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
- INSTALLS IN SECONDS: 1/2″ x 1/2” x 1/4″ threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.
SharkBite 23336-0000LF Shut Off Water Valve, 1/2" x 1/4", Angle
- INSTALLS IN SECONDS: 1/2 inch push-fit x 3/8 inch threaded compression angle shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- LEAD FREE COMPLIANT: DZR lead free brass SharkBite valves
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.
SharkBite 23337-0000LF Shut Off Water Valve 1/2" x 1/4" Straight
Product Description
SharkBite 1/2″ X 1/4″ Compression Straight Stop Valve
We use high quality DZR Lead Free Brass for our 1/2” x 1/4” Quarter Turn Straight Stop Ball Valve. Chrome plated valve for an attractive appearance. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve.
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
From the Manufacturer
Shark Bite push-fit fittings are the fastest, easiest way to join copper, CPVC and PEX in any combination-wet or dry-with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Fittings certified to 200 PSI and 200-DegreeF (93-DegreeC). Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels
SharkBite 23056LF 1/2" X 1/4" Od Compression Angle Stop
- Shark Bite 1/2″ x 1/4″ OD brass barb compression chrome angle stop quarter turn 1 per bag
- Suitable for installing at the end of an ice maker supply line or waste drain
- The Shark Bite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired
Shark Bite 1/2″ x 1/4″ OD brass barb compression chrome angle stop quarter turn 1 per bag. Suitable for installing at the end of an ice maker supply line or waste drain. The Shark Bite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with DZR brass and are corrosion resistant. NSF approval.
SharkBite U850G50 PEX Tubing, 1/4-Inch (3/8 O.D.) by 50-Feet
- 50′ cross-linked polyethylene coil tubing
- 1/4″ (3/8″ OD)
- Made without an oxygen barrier for potable water systems
- Repeating SharkBite imprint pattern provides a visual aid to determine if the tube has been inserted all the way into the SharkBite Push-Fit Fitting
- Color: White
Product Description
Shark bite, 1/4 inch copper tube size x 50′, white, PEX coil, a cross linked polyethylene tubing used for potable water application, printed with a Shark Bite imprint pattern that provides a visual aid to determine if the tube has been inserted all the way into the Shark Bite push fit fitting.
From the Manufacturer
SharkBite U850G50 PEX Tubing 1/4-Inch (3/8 O.D.) x 50 ft. Coil without Oxygen Barrier Gray Color
SharkBite U850W50 PEX Pipe Tubing 1/4", Flexible Water Tube, Potable Water, 50 foot coil, White
- Shark bite PEX is cross-linked polyethylene tubing best suited for potable water supply applications and is strong, durable, flexible, and corrosion resistant so that it may be used either indoors
- Shark bite PEX features a repeating Shark bite imprint pattern that provides a visual aid to help you determine whether the tube has been fully inserted when using the Shark bite push-fit fitting
- Flexibility reduces the number of fittings need to complete a job, reducing cost
SharkBite U860W25 PEX Pipe 1/2 Inch, Flexible Water Tube, Pot, 25-Foot, White
- Shark bite PEX is cross-linked polyethylene tubing best suited for potable water supply applications and is strong, durable, flexible, and corrosion resistant so that it may be used either indoors
- Shark bite PEX features a repeating Shark bite imprint pattern that provides a visual aid to help you determine whether the tube has been fully inserted when using the Shark bite push-fit fitting
- Flexibility reduces the number of fittings need to complete a job, reducing cost
Product Description
SharkBite White PEX Pipe
SharkBite PEX Tubing is an excellent flexible water pipe tubing product for plumbing, radiant and hydronic systems. PEX tubing is flexible, easy to install and minimizes noise caused by water hammer. Designed for use on hot and cold potable water lines, WHITE PEX tubing is commonly used for hot or cold water lines for identification purposes.
Benefits of SharkBite PEX Tube:
- Health & Safety: No glue, solder, or unions required for the connection process, which keeps dangerous chemicals out of plumbing systems. There is no risk of copper traces in water from breakdown of pipe that has been linked to heart disease and Alzheimer’s.
- Versatile: SharkBite PEX Pipe can be installed in dry or wet conditions or underground. SharkBite PEX Pipe can lend itself to many applications due to its physical properties of flexibility, reliability and installation ease such as hydronic heating, fire protection, etc.
- Proven & Guaranteed: SharkBite PEX Pipe has been around for more than 35 years with over 12 Billion feet of tubing installed worldwide
- Cost Effective: SharkBite PEX Pipe is substantially more cost effective than Copper pipe–SharkBite PEX Pipe costs a third of the price of Copper.
SharkBite Connection System – Total Rough-in Solution
SharkBite PEX tubing can be used with SharkBite push-to-connect fittings, SharkBite stainless steel clamp system, SharkBite copper crimp system, SharkBite barbed fittings, SharkBite manifolds, or SharkBite valves. The combination of SharkBite push-to-connect fittings, manifolds, valves and PEX tubing is the fastest way to plumb any residential or commercial project.
From the Manufacturer
SharkBite U860W25 PEX Tubing 1/2-Inch x 25 ft. Coil without Oxygen Barrier White Color
Conclusion
By our suggestions above, we hope that you can found sharkbite ice maker water line for you.Please don’t forget to share your experience by comment in this post. Thank you!
