dailyspect 
Nowadays, there are so many products of water cooling pump 12v in the market and you are wondering to choose a best one. You have searched for water cooling pump 12v in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water cooling pump 12v which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Yosoo SC-300T DC 12V Ultra-Quiet Water Cooling Pump Tank 4W Reservoir max.300L/h for PC CPU Liquid Cooling System
- Used in computer water cooling system
- LED power indicator to indicate power-on state
- Control circuit,the pump is more stable
- Support speed testing function
- Small 3P power connector can be directly plugged into the headboard fan original position
- With rubber shock absorber base,ultra-quiet experience.(Tips:It is good to use the pipe with 8MM inner diameter)
- Model:SC-300T
- Flow:max300L/h
- Head:max 1.9 meters
- Voltage:DC12V
- Power: 4W
- Water tank capacity: 150ml
- Noise:23DB
Description:
– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm
Features:
– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）
Package included:
– 1pcs ultra-quiet Water pump
BXQINLENX SC600 DC 12V PC CPU Water Cooling System Tool Water Pump 132.09 GPH 10W Brushless Drive Water Pump for Destop Computer Laptop Computer
LENX SC600 DC 12V PC Cpu Water Cooling System Tool Water Pump 132.09 GPH 10W Brushless Drive Water pump for Destop Computer Laptop computer
Specifications:
Power consumption:10W
Rated voltage: DC 12V
Rated current: 0.8A
Max flow rate: 500L/H (132.09G/H)
Max static head: 3m (9.8ft)
Diameter of inlet:Female G 1/4″
Diameter of outlet:Female G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:3000 RPM
Size:length 9 cm, height 8 cm, width 6cm.
NOTE:
1. Working at rated voltage (DC12V/0.8A). The positive pole is red wire, the negative pole is black wire,white wire is test wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden
Package:
1 X Water pump
CPU Water Cooling Pump,DC 12V 10W Low Noise CPU Cooling Water Pump for Desktop Computer Cool System,500L/H – G1/4 Thread
- ➤500L/H CPU Cooling Water Pump — This CPU Water Cooling Pump flow speed up to 500L/H that makes heat dissipation highly efficient and Stable performance.
- ➤DC 12V 10W Low Noise Computer Pump Tank — Rated Voltage: DC 12V
- Power Consumption: 10W.This Noiseless Water Cooling Pump will work Ultra-quiet,won’t disturb you.
- ➤Plug-and-play CPU Water Cooling Pump — Big 4 Pin Plug / Small 3Pin Plug Connector,G1/4 Inch Thread for Desktop Computer Cool System
- ➤Material — Acrylic + Plastic
- Size — 50 x 50 x 80 mm / 2” x 2” x 3.1″
- ➤ Quality service – We provide quality return service, if you are not satisfied with the product, please contact us, we will provide you with after-sales protection.
Features:
G1/4 thread water pump for computer CPU water cooling system. Noiseless water cooling pump – Ultra-quiet operation won’t disturb you. Made of high-quality acrylic and plastic, ensure a long service life. Stable performance with high flow rate( 500L/H) Easy to install and use.
Specification:
Type: Water Pump
Voltage: 12V DC, large 4P / small 3P plug
Current: 0.8A
Power: 10W
Lift: 4 meters
Flow rate: 500L/H
Material: Acrylic + Plastic
Thread: G1/4
Inlet and outlet: 1/4 internal thread, Thread Coupling is NOT included
Weight: Approx. 290g
Size: Approx. 5 * 5 * 7.8cm / 2 * 2 * 3.1in
Package size: Approx. 13.5 * 8.5 * 9.5cm / 5.3 * 3.3 * 3.7in
Package list:
1 * Water Pump
Note:
Please allow slight error due to manual measurement. Thanks for your kind understanding.
Zopsc G1/4 Acrylic Cylinder DIY Computer Water Cooling Tank 12V 19W Waterproof and Durable Water Pump Reservoir, Easy to Install, 110mm, 160mm, 210mm, 300mm (Optional)(110mm)
- The water tank is integrated with the water pump for easy installation and a more beautiful appearance
- The water cooling tank features thick pipe wall, which can sustain the tremendous pressure
- The pump is waterproof and durable, ensuring a long service life
- Inlet and outlet interface: G1/4 thread
- Heat-resistant acrylic tank: featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable
Features:
1. In order to facilitate transportation, the pump and the water tank are disassembled and placed, and the user needs to install it simply.
Specifications:
Material: PMMA + POM + Anode Aluminum
Color: Black + Transparency
Tank length: 110mm, 160mm, 210mm, 300mm (Optional)
Hole site: G1/4 Thread
Rated current: 0.8A
Rated power: 19W
Water pump flow: 800L/H
Starting voltage: 12V
Maximum voltage: 13.5V
Power interface: big 4pin, small 4pin
Overall Length: Approx. 19.5cm / 7.7in
or 24.5cm / 9.6in
or 29.5cm / 11.6in
or 38.5cm / 15.1in
Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)
Weight: Approx. 557-640g
Package List:
1 * Water Tank and Pump
2 * Plastic Buckle
2 * Metal Buckle
1 * Bag of Screw and Nut
Similar items with 4 stars and above
BXQINLENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 117 ml CO2 Cooler
LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 117 ml CO2 Cooler
Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 110 MM, diameter 50MM.
NOTE:
1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden
Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws
500L/H 10W DC 12V CPU CO2 Water Cooler Cooling Pump Tank Heat Exchanger Mute 60 × 160 mm
- ☞16 DB LOW NOISE—The max noise the water cooling pump tank could generate during work is 16 DB, so quiet and will not bother you
- ☞50000 WORKING HOURS—The water cooling pump tank has a working life of 50000 hours, long service time
- ☞3 PIN CONNECTOR—3-pin connector could be plugged into various devices, convenient to use. Please do not use voltage higher than dc 12 v
- ☞MAX 500 L / H—The max flow rate of the water cooling pump tank is 500 L/H, and max head is 3 meter
- ☞3 PIN CONNECTOR—Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product. It is our pleasure to service you
Specification:
Flow Rate: max 500L / H
Head: max 3 Meter
Power Connector: 3pin connector
Voltage: DC12V
Power: 10W
Noise: 16 DB
Working life: 50000 hours
Water tank capacity: 250 ml
Threaded connections: G 1/4″ DN8
Product Dimensions: Diameter 60mm × height 160mm
Package:
1 × Water Cooling DC Pump Tank 250ML F CPU CO2 Heat Exchanger Water Cooler 500 L/H
Eboxer G1/4 160MM Acrylic Cylinder Computer Water Tank 12V 19W CPU Water Cooling Pump Radiator(210mm)
- The water cooling tank features thick pipe wall, which can sustain the tremendous pressure,The pump is waterproof and durable, ensuring a long service life
- Heat-resistant acrylic tank: featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable
- Material: PMMA + POM + Anode Aluminum Color: Black + Transparency Tank length: 110mm, 160mm, 210mm, 300mm (Optional) Hole site: G1/4 Thread Rated current: 0.8A Rated power: 19W
- Water pump flow: 800L/H Starting voltage: 12V Maximum voltage: 13.5V Power interface: big 4pin, small 4pin
- Package List: 1 * Water Tank and Pump 2 * Plastic Buckle 2 * Metal Buckle 1 * Bag of Screw and Nut
Specifications:
Material: PMMA + POM + Anode Aluminum
Color: Black + Transparency
Tank length: 110mm, 160mm, 210mm, 300mm (Optional)
Hole site: G1/4 Thread
Rated current: 0.8A
Rated power: 19W
Water pump flow: 800L/H
Starting voltage: 12V
Maximum voltage: 13.5V
Power interface: big 4pin, small 4pin
Overall Length: Approx. 19.5cm / 7.7in
or 24.5cm / 9.6in
or 29.5cm / 11.6in
or 38.5cm / 15.1in
Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)
Weight: Approx. 557-640g
Package List:
1 * Water Tank and Pump
2 * Plastic Buckle
2 * Metal Buckle
1 * Bag of Screw and Nut
Similar items with 4 stars and above
Diyeeni 19W 12v CPU Water Cooling Pumpe Reservoir DIY Combo, 800L/H Water Pump, G 1/4" Thread Port, PC CPU Water Cooling System Heat Exchanger Tool, Transparent Acrylic Material, Easy Install(300mm)
- The water tank is integrated with the water pump for easy installation and a more beautiful appearance
- The water cooling tank features thick pipe wall, which can sustain the tremendous pressure
- The pump is waterproof and durable, ensuring a long service life
- Inlet and outlet interface: G1/4 thread
- Heat-resistant acrylic tank: featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable. In order to facilitate transportation, the pump and the water tank are disassembled and placed, and the user needs to install it simply.
Specifications:
Material: PMMA + POM + Anode Aluminum
Color: Black + Transparency
Tank length: 110mm, 160mm, 210mm, 300mm (Optional)
Hole site: G1/4 Thread
Rated current: 0.8A
Rated power: 19W
Water pump flow: 800L/H
Starting voltage: 12V
Maximum voltage: 13.5V
Power interface: big 4pin, small 4pin
Overall Length: Approx. 19.5cm / 7.7in
or 24.5cm / 9.6in
or 29.5cm / 11.6in
or 38.5cm / 15.1in
Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)
Weight: Approx. 557-640g
Package List:
1 * Water Tank and Pump
2 * Plastic Buckle
2 * Metal Buckle
1 * Bag of Screw and Nut
Similar items with 4 stars and above
Wendry PC Cooled Water Pump, 12V Ceramic Bearing Three-Phase PC Temperature Display Integrated Water Cooling Pump for Computer Water Cooling System(White)
- Three-phase motor has high lift, high flow and high life.
- We use G1/4 thread for the convenience of customers to use different sizes of joints in different environments.
- In order to avoid the leakage of the interface crack caused by the common style plastic interface in the market, we have built-in pure copper built-in copper nail to solve such problems.
- Innovative use of the detachable function of the water tank, damage to the water tank, or replacement of large capacity water tanks becomes possible.
- We have added real-time water temperature detection function in the extended function, so that industrial customers can always master the water temperature.
The advantages of a three-phase motor are high lift, high flow, and high life, but they consume less power than single-phase motors. Through testing, the parameters recorded by the three-phase motor 12V, 5W power consumption are 3 meters head and 450L/H flow. However, the single-phase motor 12V, 6W power consumption can only record the head 2 meters, the flow rate of 250L / H parameters.
Specification:
Material: Acrylic + ABS
Color: Black, White (optional)
Model: PUB-12YT integrated water-cooled pump
Motor: Three-phase permanent magnet motor
Shaft core: Ceramic
Interface: G1/4
Standard voltage: 5V
Minimum starting voltage: 3.8V
Head: 1 meter
Flow rate: 200L/H
Power interface: large 4P D port
PG signal: Support
PWM automatic temperature control: Support
Extended function: Temperature display + Detachable water tank
Size: Approx. 8.7 * 8.5 * 6.8 cm/ 3.4 * 3.3 * 2.7 in
Weight: about 252 g
Package list:
1 * Water Pump
4 * Rubber Mat
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found water cooling pump 12v for you.Please don’t forget to share your experience by comment in this post. Thank you!
