The 10 Best Water Cooling Tube Reservoir Mount

Barrow Water Tank Inline Reservoir

Model: YPH65-98 V2

Barrow Water Tank Inline Reservoir

Model: YPH65-220 V2

The X4 Photon Reservoir/Pump Combo combines the ultimate tube reservoir with the new XSPC X4 pump. The X4 pump is a compact and high performance pump, designed for PC water-cooling. The pump has a flow rate of 600lph, a powerful head delivery of 3m and a ceramic shaft for longer life and reliability. The X4 offers similar performance to a D5 pump on setting 4, but at a lower noise level and a more affordable price. The Photon’s tube is made from a quality toughened glass, which is both crystal clear and highly resistant to staining. In the center of the tube is an acrylic lighting pole that connects to a 5mm LED on the base of the reservoir. The LED is easily replaceable so you can match the lighting colour to your build. Unlike other tube reservoirs, which use cheap plastic brackets, the XSPC Photon has high quality CNC cut aluminium bracket. The bracket can attach directly to a 120mm or 140mm radiator, making installation easy and as compact as possible. Each reservoir/pump combo is hand assembled and pressure tested before sale to ensure reliability.

Model: 5060175588098

This Eisbecher is the older brother of the DDC version. The pump is being mounted with a mounting ring that holds the pump with eight screws. You can use four LEDs that are hidden within the socke of the pump for the lighting of the plexi version. The lighting of the top is fascilitated through the lighting module. Standpipe and Bubble Down both do an excellent job in this model as well. The fastening happens through either the mountings or through the bases that are included in the delivery. There are even threads in the socket of the pump should there be a free space at the 3,5″ drive bay (pump decoupling with M4 inner thread and outer thread needed – Art. 52007).

Included in delivery:
4x M4x25mm screw
8x M4x8mm screw
4x M4 nut
1x mounting ring
1x O-Ring ID ca. 54mm
2x base
1x allen key 2,5mm

Measurements 150mm Version:
Measurements incl. mounting without base (LxWxD): 157,5 x 136 x 79,5mm
Measurements without mounting incl. base (LxWxD): 203,5 x 87,5 x 80mm

Diameter of the Plexitube: 60mm

Measurements 250mm Version:
Measurements incl. mounting without base (LxWxD): 257,5 x 136 x 79,5mm
Measurements without mounting incl. base (LxWxD): 303,5 x 87,5 x 80mm

Diameter of the Plexitube: 60mm


Written Reviews

</p

3D Model (.stp)

Ethereal Dual by Singularity Computers is a revolutionary and unique component which allows for 2 x Reservoirs, 2 x Pumps, a Radiator and Fans to be combined into a single unit. The mount can also be used as a standlone reservoir mount without fans and a radiator. The design is extremely versatile and can be used with almost every water-cooling component brand on the market.

Singularity Computers Reservoir Mounts are built using the most high quality manufacturing process possible. They are carved from a solid block of Billet Alloy on a 4 axis CNC mill. This product was built for true enthusiasts who put great importance on perfection.

All SC Reservoir Mounts fit any 60mm reservoir which includes EK, Bitspower, Alphacool, FrozenQ and more. They can be mounted to any 120mm through to 480mm radiator, or with the 140mm Backplate (purchased separately) they can be mounted to any 140mm through to 560mm radiator. They can be mounted to any 120mm or 140mm fan mounting position. They can be mounted with or without fans on the radiator. They can also be mounted directly to a case panel. Any pump top, pump mods and pump in combination with any 60mm reservoir can also be used. They can even be used in combination with Bitspower and EK pump mounting systems. A lot more could be added here but I will leave it up to you to experiment and open up new possibilities.

If you are using Ethereal then in most situations you are going to need two reservoir mounts. Protium pump and reservoir combinations have two other mounting systems which can be used in combination with a single reservoir mount. So if you are using Protium and you want to use one of the other mounting options we have available, you will only need a single reservoir mount.

Ethereal Dual Included Items:
Mount: Main Mount, Wedge Clamp, 120mm Backplate. Bolts Stainless Zinc Plated: M4 10mm Countersunk x4, M4 20mm Socket Head: x2.

Model: sc-eth-dual-sl

Ethereal Single by Singularity Computers is a revolutionary and unique component which allows for a Reservoir, Pump, Radiator and Fans to be combined into a single unit. With Ethereal Dual you can take it even further and mount two Reservoir and Pump configurations side by side onto a radiator with fans. The design is extremely versatile and can be used with almost every water-cooling component brand on the market.

Singularity Computers Reservoir Mounts are built from a solid block of Billet Alloy, and are for true enthusiasts who put great importance on perfection.

All SC Reservoir Mounts fit any 60mm reservoir which includes EK, Bitspower, Alphacool, FrozenQ and more. They can be mounted to any 120mm through to 480mm radiator, or with the 140mm Backplate (purchased separately) they can be mounted to any 140mm through to 560mm radiator. They can be mounted to any 120mm or 140mm fan mounting position. They can be mounted with or without fans on the radiator. They can also be mounted directly to a case panel. Any pump top, pump mods and pump in combination with any 60mm reservoir can also be used. They can even be used in combination with Bitspower and EK pump mounting systems. A lot more could be added here but I will leave it up to you to experiment and open up new possibilities.

Do I need one or two mounts?
If you are using Ethereal then in most situations you are going to need two reservoir mounts. Protium pump and reservoir combinations have two other mounting systems which can be used in combination with a single reservoir mount. So if you are using Protium and you want to use one of the other mounting options we have available, you will only need a single reservoir mount.

Ethereal Single Included Items: Mount: Rear Clamp, Front Clamp, 120mm Backplate. Bolts Stainless Zinc Plated: M4 10mm Countersunk: x2. M4 10mm Socket Head: x2.

Model: sc-eth-sgl-sl

LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 255 ml CO2 Cooler

Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 210 MM, diameter 50MM.

NOTE:

1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws

Another innovative component for your watercooling system by Phobya! The newest innovations combined with exclusive appearance and proven functionality. The top and bottom are made from solid metal and combined with a transparent tube made from Plexi. The reservoir is shipped with two black mounts with safety latch. These mounting clips have a foam plastic sheet at their inside to protect the Plexi of the reservoir. Versatility and functionality were a great factor when designing this reservoir. You will notice the large number of connection threads, two at the bottom and two at the side of the bottom piece, which allows a great variety of mounting possibilities. The threads at the side especially make horizontal installation of the reservoir easily possible, giving you a whole array of new possibilities. The fifth connection thread in the top piece can be used as an In- our outlet when installed horizontally or for connection of a Fillport etc. Another possibility is to equip the unused threads with lighting modules to shine a whole new light on your reservoir! An ”Anti-cyclone” was integrated. This separating plate prevents vortexing inside of the reservoir and also prevents stronger pumps to suck in air bubbles from the inlet. All connection threads in the reservoir are 1/4″ in size. Thee nickel plated screw plugs are included for the unused threads. Both bottom and top piece may be removed for cleaning of the tube. All mounting material is also included! Note: The outer diameter is 50mm, the inner diameter is 40mm. So the thickness of the wall is 5mm. The thread M42x1.5.

Model: 45151

Building on the original Monsoon’s success, the new Monsoon Series Two D5 Premium features a host of design refinements and improved modularity all aimed at making them easier to use, quieter, and a better overall value. The new vibration dampening mounting system is the industry’s first and only 100% decoupled mounting solution and substantially reduces the amount of sound generating vibration transmitted from your reservoir to your chassis. The 40% glass filled molded nylon main body now features sound dampening cavities that work on the same principles as the baffles in a car muffler or the sound dampening material on the walls of a recording studio—each time you redirect a sound wave it loses energy. The new LED lighting board has been moved to the bottom of the reservoir to prevent accidentally getting it wet if the user overflows the top fill port catch basins and the board now features RGB color changing LED’s that allow the user to scroll through the color presets and select the perfect light color for their build. It also now has a chip that retains your brightness setting and light color selection on power down. The face plate is still machined 6mm aluminum, but the mounting screws are now hidden on the back for a cleaner more streamlined look—no cheesy 1mm thick faux aluminum face plates stuck on with double back tape here. The reservoir back is precision machined PVC and because the reservoir is fully modular, the pump backs, face plates, motor mounting hardware, and color matched screws and stop plugs can be mixed and matched to suit your current and future builds. All screws are color coordinated stainless steel and the included stop plugs are color coordinated machined brass. Sleeving is premium triple strand triple weave and the Molex plug is black. Includes all wrenches, mounting screws, stop plugs, comprehensive instruction manual, and a limited one (1) year warranty. Pump not included.

Model: M2-D5P-RD

Bitspower Water TanK Z-Multi Ultra 250 Reservoir. Includes Z-CAP with G1/4″ x 1, Z-Tube 250 x1, Tank Clamp Set x1, G1/4″ Silver Shining Stop Fitting x3.

Model: BP-WTZMU250P-CLBK

Conclusion

By our suggestions above, we hope that you can found water cooling tube reservoir mount for you.Please don’t forget to share your experience by comment in this post. Thank you!